Skip to content
HelpfulCoin

BENQI Review: Is Its Avalanche DeFi Platform Safe?

BENQI is an Avalanche DeFi platform for staking AVAX as sAVAX, lending and borrowing crypto, and running or supporting validators. Its products offer flexible on-chain access, but yields and withdrawals are not guaranteed and DeFi risks remain.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

BENQI may suit Avalanche users who understand wallet-based DeFi and want to stake AVAX or lend and borrow crypto. Its public history, documentation, and audits resource are useful starting points, but they do not remove smart-contract, liquidation, or sAVAX risks. BENQI does not publish a licence, a clear incident record, or a general fee and withdrawal schedule. Review current market rules and audit reports before depositing, and only use funds you can afford to lose.

Our verdict:Use with caution5.9/10

HelpfulCoin report card

Use with caution

5.9/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
D (5.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
C (6.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
C (6.5 out of 10)
ReputationHow established and openly run it is.
C (6.5 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Benqi at a glance

What it is
Avalanche DeFi: staking, lending, borrowing
Network
Avalanche
Token
QI
Liquid staking
Stake AVAX and receive sAVAX
Deployer
Rome Blockchain Labs, per token profile
Founded
2021, per token profile
Last checked

Green flags and red flags

Reassuring

  • BENQI has public documentation and an Audits resource.
  • The platform describes several distinct Avalanche products, including lending and liquid staking.
  • Its public project history dates back to 2021, according to a token-information profile.

Be careful about

  • An Audits resource does not by itself show which contracts were reviewed or whether changes were covered.
  • BENQI does not publish a licence or a clear incident record in its product information.
  • Borrowing can lead to liquidation if collateral value falls, and market rates can change.
  • BENQI does not publish general withdrawal limits or guaranteed processing times.

What is BENQI and what can you do with it?

BENQI is an Avalanche DeFi platform for liquid staking, lending, borrowing, and validator services. You can stake AVAX to receive sAVAX, supply crypto assets to earn interest and QI rewards, or borrow against supplied collateral. Its Ignite service helps users run Avalanche validators, while Node Voting lets users direct delegation using BENQI Miles. These are separate activities with different risks: lending and borrowing depend on market rates and collateral rules, while liquid staking exposes you to the value and redemption mechanics of sAVAX. BENQI is not a bank account or a guaranteed-yield product; interacting with it means using crypto wallets and blockchain transactions. The platform’s stated network is Avalanche, and QI is its token. Its homepage presents the app as active, but rates, available assets, and product terms can change. Check the current app and documentation before committing funds.

Is BENQI safe to use for lending or staking?

BENQI carries the risks common to DeFi lending and staking: smart-contract bugs, collateral liquidations, changing yields, and problems affecting Avalanche or related assets. Using a wallet avoids handing funds to a conventional account custodian, but supplied assets are controlled through protocol contracts rather than remaining freely available in your wallet. BENQI provides an Audits resource, but that alone does not show which contracts were audited, when, or whether later changes were reviewed; check the individual reports and their scope. BENQI does not publish a licence or a clear incident record in its product information. An audit cannot guarantee that funds are safe, and there is no deposit insurance. Start with an amount you can afford to lose, verify the app and network before connecting, and understand the withdrawal and liquidation rules for the specific market. Treat advertised yields as variable, not promised returns.

Is BENQI legit, and who runs it?

BENQI appears to be a real, operating DeFi project rather than an unidentified app. A token-information profile reports that it launched in 2021, raised $6 million, and was deployed by Rome Blockchain Labs; it also names co-founders JD Gagnon, Hannu Kuusi, and Alexander Szul. Those are useful signs of a public project history, but funding and named contributors do not guarantee that the protocol is secure or that users can recover funds after a loss. BENQI’s own product information describes multiple services on Avalanche and provides documentation, terms, and an Audits resource. It does not give a regulatory licence or a detailed, independently verifiable operating history on the homepage. Check current documentation and audit reports, and make sure the app you connect to is the genuine BENQI app. A legitimate protocol can still expose users to substantial technical and market risk.

What fees and interest rates does BENQI charge?

BENQI does not publish a single fixed cost for using its products. Each Avalanche transaction requires a network fee, commonly called gas, and that amount can vary with network conditions. Lending rates change with supply and borrowing demand, so supplying an asset may earn a different rate over time and borrowing costs can rise or fall. The homepage says suppliers may also receive QI rewards, but it does not promise a fixed reward rate. BENQI does not give a general schedule of protocol fees in its product summary; check the current app and the terms for the asset and market before transacting. Liquid staking can also involve transaction costs and possible costs or delays when converting back from sAVAX, depending on the current redemption process. Do not compare displayed yields without considering token-price changes, fees, and the possibility of liquidation if you borrow.

How does BENQI lending and liquid staking work?

BENQI works through Avalanche smart contracts, which are programs that carry out transactions according to their code. For lending, you connect a compatible wallet, choose a market and asset, approve the transaction, and supply funds; interest and any QI rewards depend on current market conditions and protocol rules. To borrow, you first supply eligible collateral, then borrow within the market’s limits. If collateral value falls too far relative to the loan, the position can be liquidated. For liquid staking, you stake AVAX and receive sAVAX, a token designed to represent staked AVAX and its accrued staking value. sAVAX may be usable in other DeFi apps, but those additional uses add risk and may affect how quickly you can exit. Start by reading the market’s collateral factors, liquidation terms, and sAVAX redemption instructions. Test the app with a small transaction before supplying a larger amount.

How do BENQI deposits, withdrawals, and KYC work?

You use an Avalanche-compatible wallet to connect to BENQI and approve transactions; no bank deposit is described. For lending, supplying assets moves them into the relevant protocol market, and withdrawing depends on available liquidity and that market’s rules. Borrowing requires eligible collateral, and you must repay the loan to release it. BENQI does not publish general withdrawal limits or a guaranteed processing time in its product summary, so check the app’s current market details before supplying. For sAVAX, review BENQI’s current redemption instructions before staking: the timing and route for converting sAVAX back to AVAX can differ from simply transferring a token. BENQI does not state a KYC requirement in its product information. That does not mean every connected service or wallet provider has identical requirements, and rules can vary by location. Confirm the network, asset, and destination address before sending funds; blockchain transactions are generally difficult to reverse.

Can you withdraw AVAX immediately from BENQI sAVAX?

sAVAX is a liquid-staking token received when you stake AVAX through BENQI. BENQI describes it as a token whose value grows with staking rewards and says it can be used as collateral or in other DeFi applications. That flexibility is not the same as a guarantee that sAVAX will always trade at the value of the AVAX it represents or can be exchanged immediately. Its market price can diverge, and using it as collateral elsewhere adds that platform’s risks too. Before staking, find the current redemption instructions, any waiting period, and the applicable transaction costs. If you borrow against sAVAX, monitor collateral levels: a fall in its value relative to your debt could trigger liquidation. Avoid staking funds you may need immediately, and do not treat the displayed staking yield as fixed or risk-free.

Before you deposit: a quick checklist

  • Open BENQI’s genuine app and confirm the wallet is on Avalanche before approving transactions.
  • Read the audit reports for the specific contracts and versions you plan to use.
  • Check current market rates, collateral limits, liquidation rules, and available withdrawal liquidity.
  • Review sAVAX redemption timing and costs before staking AVAX.
  • Start small; a smart-contract transaction may be difficult or impossible to reverse.

5 steps

How to get started with Benqi

  1. 1

    Find BENQI’s genuine app through its official channels and read the current documentation.

  2. 2

    Check the audit reports and the specific market or staking terms you intend to use.

  3. 3

    Connect an Avalanche-compatible wallet and verify the network and asset before approving anything.

  4. 4

    Make a small test transaction, then confirm how to withdraw or redeem before adding more.

  5. 5

    If borrowing, track collateral levels and repayment terms to reduce liquidation risk.

Plain English

Jargon explained

sAVAX
A token received for staking AVAX that BENQI says can be used in other DeFi services.
Gas
The fee paid to process a transaction on a blockchain.
Liquidation
A forced sale of collateral when its value no longer meets a loan’s requirements.

Quick answers about Benqi

Do you need QI to use BENQI?

No. BENQI says suppliers may earn QI rewards, but its product information does not say QI is required to supply assets or use every service.

How much does BENQI Ignite cost?

BENQI’s homepage advertises validator operation through Ignite starting at 8 AVAX per week. Check the current service terms and costs before using it.

Which blockchain does BENQI use?

BENQI identifies Avalanche as its network. The product information does not describe a deployment on other chains.

Compare

Benqi alternatives

All alternatives
Morpho Blue logoScore 6.1 out of 10

Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.

TVL $10.1B−7.0%Ethereum · Base · Robinhood Chain +41
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.1B−9.2%Ethereum · Base · Arbitrum +18
Aave V4 logo

Aave V4

Lending

Score 6.1 out of 10

Aave V4 is a modular DeFi lending protocol; its non-custodial design is a plus, but check V4-specific risks before using it.

TVL $782M−2.7%Ethereum · Arc · Avalanche +1
Euler V2 logo

Euler V2

Lending

Score 5.8 out of 10

Euler V2 is a multi-network DeFi lending protocol with customizable markets; its security work is notable, but lending and liquidity risks remain.

TVL $242M−12.9%Monad · Ethereum · Base +13
Aave V2 logo

Aave V2

Lending

Score 6.7 out of 10

Aave V2 is a non-custodial crypto lending protocol with audited code, but older-version and smart-contract risks warrant care.

TVL $88.0M−9.5%Ethereum · Polygon · Avalanche
40 Acres logo

40 Acres

Lending

Score 5.5 out of 10

40 Acres lends USDC against rewards from selected veNFTs; its no-liquidation design is appealing, but contract and operator risks warrant caution.

TVL $1.97M−13.5%Avalanche · Base · Optimism

Same category

More Lending dApps

Lending rankings
Compound V3 logoScore 6.8 out of 10

Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.

TVL $1.08B−11.7%Ethereum · Arbitrum · Base +7

Aave

Lending

Score 6.8 out of 10

Aave is a non-custodial crypto lending protocol with a long track record, but variable rates, smart-contract and liquidation risks matter.

Ethereum
NAVI Lending logoScore 6.5 out of 10

NAVI Lending is a Sui crypto lending protocol with variable rates, audit claims and the usual smart-contract and liquidation risks.

TVL $97.2M−22.4%Sui

Morpho

Lending

Score 6.5 out of 10

Morpho is onchain lending infrastructure for crypto markets and vaults; it is worth a look if you understand the contract and liquidity risks.

Ethereum · Base
Kamino Finance logoScore 6.5 out of 10

Kamino Finance is a Solana lending and liquidity protocol; it may suit DeFi users, but check market risks and audit details first.

Solana

Compound

Lending

Score 6.2 out of 10

Compound is an Ethereum crypto lending protocol with variable rates; it is worth researching, but contract and liquidation risks matter.

Ethereum

Same chain

More on Avalanche

Avalanche rankings
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.29B−13.4%Ethereum · Base · Arbitrum +38
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $719M−16.7%Ethereum · Base · Polygon +14
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.05B−10.1%Ethereum · Robinhood Chain · Base +19
Across logo

Across

Cross Chain Bridge

Score 6.8 out of 10

Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.

TVL $13.4M−11.3%Ethereum · Arbitrum · Optimism +19
Sablier Lockup logoScore 6.8 out of 10

Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.

TVL $1.54M−10.7%Ethereum · Polygon · Arbitrum +25
Coinsquare logo

Coinsquare

Centralized Exchanges

Score 6.7 out of 10

Coinsquare is a Canadian centralized crypto exchange; its regulation and custody measures are reassuring, but fees and some withdrawal terms need checking.

TVL $2.20M−16.7%Cardano · Ethereum · XRP Ledger +6

Where the answers come from

Sources

  1. coinmarketcap.com/currencies/benqi/(opens in a new tab)
  2. coingecko.com/en/coins/benqi(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.