Skip to content
HelpfulCoin

Is Euler V2 Safe? Review of Its Lending Markets

Euler V2 is a modular DeFi lending protocol for lending, borrowing and creating crypto lending markets. It has substantial security work, but smart-contract, market and liquidity risks remain.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

Euler V2 may suit experienced DeFi users who want to lend, borrow or explore configurable markets across several networks. Its security work and public developer resources are positives, but the protocol still carries smart-contract, liquidation and liquidity risks. Euler’s earlier V1 exploit is also relevant history. Check each market’s rules, current liquidity and transaction costs before depositing, and do not treat lending returns as guaranteed.

Our verdict:Use with caution5.8/10

HelpfulCoin report card

Use with caution

5.8/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
C (5.5 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
C (5.5 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
C (5.5 out of 10)
ReputationHow established and openly run it is.
C (6.5 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Euler V2 at a glance

Category
Lending
Product
Modular DeFi lending protocol
Networks
16, including Ethereum, Base, Arbitrum and Monad
Token
EUL
Custody
Smart-contract based
Audits
2 recorded; scope varies
Security
60+ engagements; Certora verification
Value locked
$242M−12.9% 7d
Last checked

Green flags and red flags

Reassuring

  • Euler reports more than 60 security engagements and formal verification by Certora.
  • Euler reports a bug bounty with rewards of up to $7.5 million.
  • The protocol provides public documentation, developer tools and governance resources.

Be careful about

  • Euler V1 suffered a major exploit in 2023; V2’s newer design does not remove smart-contract risk.
  • Withdrawals depend on available liquidity in the specific vault.
  • Rates, fees and participation rules can differ between markets and networks.

What is Euler V2 and what can you do with it?

Euler V2 is a modular crypto lending protocol where you can lend assets, borrow against collateral, or create lending markets. Rather than using one shared pool with identical rules, each market connects lending vaults and sets its own supported assets and risk parameters. The protocol is available through Euler’s app and can also be integrated into other apps. Its tools are aimed at individual lenders and borrowers as well as developers, market curators and institutions. Euler operates across multiple networks, including Ethereum, Base, Arbitrum and Monad. EUL is Euler’s token and is also shown as an asset that can be supplied or borrowed in some markets. Lending and borrowing involve smart-contract and market-specific risks.

Is Euler V2 safe to lend on?

Euler V2 has several security measures, but it is not risk-free. Euler reports more than 60 security engagements, formal verification of parts of its core protocol and Euler Earn by Certora, and a bug bounty offering rewards of up to $7.5 million. Two audits are also recorded for the project, though the scope and coverage of audits can differ. Euler’s earlier V1 protocol suffered a major exploit in 2023. V2 is a newer system with a different architecture, but that history is still relevant and does not prove V2 is safe from attack. Deposited assets are controlled by smart contracts, not held in a conventional bank account. A contract bug, bad market configuration, collateral crash or lack of withdrawal liquidity can cause losses.

Is Euler V2 legit, and who runs it?

Euler is an active DeFi lending project with a public app, documentation, developer tools and governance resources, rather than an anonymous lending page. Euler V2 went live in 2024, and the protocol is deployed across a broad set of networks. Those are useful signs of an operating project, but they do not guarantee that every market is well managed or that deposits can always be recovered. Euler’s public materials describe its security work, while the team and ownership details are not specified in the product information reviewed for this review. There is no conventional financial-services licence stated. Treat Euler as a smart-contract protocol, not a regulated bank or a guaranteed source of income, and assess the specific vault before supplying assets.

What does Euler V2 cost to use?

Euler does not publish one simple fee schedule that applies to every market. The main cost of borrowing is interest, which varies with the asset, market and utilization (how much of the available lending pool is borrowed). Lenders earn interest from borrowers, but the rate can change and is not guaranteed. You also pay the blockchain’s transaction fee, known as gas, when supplying, borrowing, repaying or withdrawing. Market settings may include fees or other parameters, so check the details for the specific vault before approving a transaction. Euler Earn is a curated vault product, but its returns and costs can depend on the strategies and markets it uses. Compare the displayed rates and terms rather than assuming that a rate in one market applies elsewhere.

How does Euler V2 work, and how do you get started?

You use Euler V2 by connecting a compatible wallet to the app on a supported network, then choosing a lending market or vault. Check the asset, network, rate, collateral rules and available liquidity before supplying funds. Lenders deposit assets into a vault and can earn interest from borrowing activity. Borrowers supply accepted collateral and borrow an asset, subject to the market’s loan limits and liquidation rules. A liquidation happens when collateral falls below the required level and may result in collateral being sold to cover a loan. Each market has its own configuration; Euler is not one pool with one risk profile. Start with a small transaction if you are unfamiliar with the app, and check the wallet’s network and transaction details before signing.

How do Euler V2 deposits and withdrawals work, and is KYC required?

You deposit by connecting a wallet, selecting a supported network and asset, and approving and submitting the supply transaction. Withdrawals are made from the relevant vault, but they depend on there being enough unborrowed liquidity available; an asset being displayed does not guarantee an instant withdrawal. Euler does not publish a single withdrawal time or universal deposit and withdrawal limit, because markets and network conditions differ. Blockchain gas fees also apply to transactions. Euler does not publish a general KYC rule for every market. Permissioned markets can restrict who may deposit, borrow or liquidate, so check their eligibility requirements before sending funds. Never assume that access rules or liquidity are the same across networks or vaults.

What risks should you check before using an Euler V2 market?

Euler’s markets have separate risk settings, so choosing a vault is as important as choosing an asset. Check which assets can be used as collateral, what can be borrowed against them, and how the market values collateral. Pay particular attention to less liquid or volatile tokens: a rapid price move can trigger liquidation, while low liquidity can make it harder to withdraw or sell. Permissioned markets may also impose participation rules. Euler Earn offers one deposit into a curated vault, but that convenience does not remove the risks of the underlying markets and strategies. Rates can change, and supplied funds are not protected by bank deposit insurance. Review the current market configuration and security information before depositing.

Before you deposit: a quick checklist

  • Confirm the wallet is connected to the intended network; Euler markets are deployed separately across chains.
  • Check the vault’s collateral, borrowing and liquidation settings before supplying or borrowing.
  • Verify available withdrawal liquidity and the market’s current rate; neither is guaranteed to stay unchanged.
  • For a permissioned market, check eligibility rules before depositing.

4 steps

How to get started with Euler V2

  1. 1

    Open Euler’s app and connect a wallet, checking that the app and wallet network are correct.

  2. 2

    Choose a specific market and review its supported assets, collateral rules, rates and withdrawal liquidity.

  3. 3

    Check any permission requirements and confirm the transaction’s token, network and gas fee.

  4. 4

    Supply only an amount you can afford to risk, then monitor market conditions and your position.

Plain English

Jargon explained

Collateral
Assets supplied to a lending market that back a borrower’s loan.
Gas
A transaction fee paid to the blockchain network.
Liquidation
A forced sale of collateral when a loan no longer meets its market’s safety rules.

Quick answers about Euler V2

Does Euler V2 offer a fixed lending rate?

No. Borrowing rates vary by market and can change with utilization, while lender returns are not guaranteed.

Do you need EUL to use Euler V2?

No. EUL is Euler’s token and is shown as a supported asset in some markets, but its broader role is not specified in Euler’s product information.

Can you use the same Euler V2 market on every chain?

No. A market on one network is a separate deployment from a market on another. Check your wallet’s network and the selected market before transacting.

Compare

Euler V2 alternatives

All alternatives
Morpho Blue logoScore 6.1 out of 10

Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.

TVL $10.1B−7.0%Ethereum · Base · Robinhood Chain +41
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.1B−9.2%Ethereum · Base · Arbitrum +18
Compound V3 logoScore 6.8 out of 10

Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.

TVL $1.08B−11.7%Ethereum · Arbitrum · Base +7
Dolomite logo

Dolomite

Lending

Score 5.8 out of 10

Dolomite is a multi-chain DeFi lending protocol with borrowing and yield tools; it merits a look, but carries contract and liquidation risks.

TVL $124M−11.2%Ethereum · Arbitrum · Berachain +4
SparkLend logo

SparkLend

Lending

Score 6.0 out of 10

SparkLend is an on-chain lending protocol with governance-set rates; it merits a look, but check market risks and withdrawal liquidity first.

TVL $4.11B−14.3%Ethereum · xDai
Gearbox logo

Gearbox

Lending

Score 6.0 out of 10

Gearbox is an on-chain lending and credit protocol; it is worth researching, but check each market’s fees, risks and restrictions.

TVL $18.9M−12.4%Ethereum · Etherlink · Monad +8

Same category

More Lending dApps

Lending rankings

Aave

Lending

Score 6.8 out of 10

Aave is a non-custodial crypto lending protocol with a long track record, but variable rates, smart-contract and liquidation risks matter.

Ethereum
Aave V2 logo

Aave V2

Lending

Score 6.7 out of 10

Aave V2 is a non-custodial crypto lending protocol with audited code, but older-version and smart-contract risks warrant care.

TVL $88.0M−9.5%Ethereum · Polygon · Avalanche
NAVI Lending logoScore 6.5 out of 10

NAVI Lending is a Sui crypto lending protocol with variable rates, audit claims and the usual smart-contract and liquidation risks.

TVL $97.2M−22.4%Sui

Morpho

Lending

Score 6.5 out of 10

Morpho is onchain lending infrastructure for crypto markets and vaults; it is worth a look if you understand the contract and liquidity risks.

Ethereum · Base
Kamino Finance logoScore 6.5 out of 10

Kamino Finance is a Solana lending and liquidity protocol; it may suit DeFi users, but check market risks and audit details first.

Solana

Compound

Lending

Score 6.2 out of 10

Compound is an Ethereum crypto lending protocol with variable rates; it is worth researching, but contract and liquidation risks matter.

Ethereum

Same chain

More on Monad

Monad rankings
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.29B−13.4%Ethereum · Base · Arbitrum +38
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $719M−16.7%Ethereum · Base · Polygon +14
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.05B−10.1%Ethereum · Robinhood Chain · Base +19
Across logo

Across

Cross Chain Bridge

Score 6.8 out of 10

Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.

TVL $13.4M−11.3%Ethereum · Arbitrum · Optimism +19
Sablier Lockup logoScore 6.8 out of 10

Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.

TVL $1.54M−10.7%Ethereum · Polygon · Arbitrum +25
3route logo

3route

Dex Aggregator

Score 6.8 out of 10

3Route routes crypto swaps across DEX liquidity, with a Tezos app and multichain API; it is worth a look if you check fees and transaction details.

Tezos · Ethereum · Base +3

Where the answers come from

Sources

  1. defillama.com/protocol/euler-v2(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.