Aave V2 Review: Is It Safe and Still Worth Using?
Aave V2 is an older, non-custodial crypto lending protocol for supplying assets and borrowing against collateral. It has audits and a long-running project behind it, but smart-contract, market and liquidation risks remain.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Aave V2 may suit experienced DeFi users who want to supply crypto or borrow against collateral, especially if they understand wallet transactions and liquidation risk. Its open-source code, audits and Aave’s long history are reassuring, but they do not make deposits risk-free. V2 is an older version, so confirm the exact market is supported and check live rates, liquidity and gas before moving funds.
Our verdict:Good, with caveats6.7/10
HelpfulCoin report card
Good, with caveats6.7/ 10 overall
Worth using if the caveats below don’t affect you.
- SafetyHow funds are held, audits, licence, incidents.
- C (6.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- C (6.5 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- C (5.5 out of 10)
- ReputationHow established and openly run it is.
- B (8.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Aave V2 at a glance
- Category
- Lending
- Product
- Non-custodial crypto lending protocol
- Networks
- Ethereum, Polygon, Avalanche
- Token
- AAVE
- V2 released
- 2020
- Audits
- Two associated with V2
- Custody
- Assets held by smart contracts
- Value locked
- $87.8M−9.1% 7d
- Last checked
Green flags and red flags
Reassuring
- Aave is an open-source protocol with onchain governance.
- Aave says its protocol code has been audited and formally verified.
- Aave began in 2017, with V2 released in 2020.
Be careful about
- Smart-contract or market failures can cause losses, and audits do not eliminate that risk.
- Borrowers can lose collateral through liquidation when their position becomes unsafe.
- Aave’s current products promote newer versions, so V2 market support may differ.
- Rates and network gas costs can change, and no universal V2 fee is published.
What is Aave V2 and what can you do with it?
Aave V2 is a non-custodial lending protocol where you can supply crypto to earn interest or borrow crypto against collateral. It runs on Ethereum, Polygon and Avalanche. Non-custodial means the assets are held by smart contracts rather than by a company operating a conventional account. Suppliers earn rates that can change as market supply and borrowing demand change. Borrowers must provide more collateral value than they borrow, and can be liquidated if their collateral falls too far in value. Aave V2 is a specific, older version of the protocol; Aave’s current product pages also promote newer versions. Don’t assume every asset or market shown in current Aave products is available on V2. It may suit experienced DeFi users who understand wallet transactions and collateral risk, but it is not a bank account or a guaranteed-interest savings product.
Is Aave V2 safe to use?
Aave V2 has meaningful safeguards, but it is not risk-free. Aave is non-custodial: supplied assets sit in smart contracts, so there is no ordinary company account that can simply return funds if the contracts fail. Aave says its protocol code has been audited and formally verified; two audits are associated with V2. Audits can reduce the chance of bugs but cannot rule them out, and smart-contract, market, oracle and blockchain risks remain. Borrowers also face liquidation if collateral value falls or debt grows too high. Aave describes onchain governance and a bug bounty, but those measures do not guarantee recovery after an exploit or loss. No licence or insurance coverage for V2 is published. Consider a small test transaction, check the exact network and market, and never deposit money you cannot afford to lose.
Is Aave V2 legit, and who runs it?
Aave is a long-running DeFi project, but Aave V2’s legitimacy does not remove the risks of using a smart-contract protocol. Aave began in 2017, and V2 was released in 2020. The protocol is open source and governed through onchain processes. Aave Labs builds products and services around Aave, but says it does not control or operate protocol deployments on blockchains. That distinction matters: using a wallet interface is not the same as placing funds with a company that guarantees repayment. Aave’s public record and audits are reassuring signs, but the project does not publish a licence for V2, and no guarantee against losses is offered. Check that you are interacting with the genuine Aave interface and the intended V2 contracts; lookalike sites and unsolicited wallet prompts are a separate risk.
What fees and interest rates does Aave V2 charge?
Aave V2 does not publish one fixed fee or interest rate for every user. Supplying or withdrawing assets, borrowing, repaying and moving tokens each require blockchain transactions, so you pay network gas in the chain’s native token. Gas varies with network demand. Supply rates and borrowing rates also change with market conditions, including how much of an asset is being borrowed. Borrowing can involve additional protocol charges, and liquidation can cause losses if collateral requirements are breached; check the asset market’s terms before proceeding. The interface should display applicable rates and transaction details before you confirm, but those figures can change. Aave V2 does not publish a single universal minimum deposit or withdrawal fee. Compare the expected transaction cost with the amount you plan to move, particularly on Ethereum, where gas can make small transactions uneconomical.
How do you start using Aave V2?
To use Aave V2, you need a compatible crypto wallet, assets on a supported network and enough of that network’s native token for gas. First verify that the Aave interface supports the V2 market you intend to use; newer Aave products may focus on other versions. Connect your wallet, choose the correct network and market, and review the asset’s supply and borrow rates. Supplying usually requires approving the token and then confirming a deposit transaction. To borrow, supply eligible collateral first, choose an asset and amount, then check how the loan affects your health factor—the measure of how close your collateral is to liquidation. Keep a safe buffer rather than borrowing to the limit. Direct wallet use generally does not involve a conventional account signup, but Aave does not publish a V2 onboarding checklist covering every interface or region.
How do Aave V2 deposits and withdrawals work?
You deposit by sending supported tokens from your wallet into Aave V2’s smart contracts, and withdraw by requesting eligible supplied assets back to that wallet. Both actions require an onchain transaction and gas. A withdrawal can depend on available liquidity in that asset’s market, so do not assume every deposit can be withdrawn instantly in all conditions. If you have borrowed against your supplied assets, withdrawing collateral may be restricted or could bring your position closer to liquidation. Aave V2 does not publish a universal deposit or withdrawal limit; available amounts depend on the market and your position. Direct protocol use generally does not require a conventional bank-style KYC account, though wallet apps, exchanges or fiat on-ramps you use may ask for identity checks. Aave V2 does not provide a bank deposit or cash-out service: converting crypto to fiat usually requires a separate exchange or service.
Is Aave V2 still available, and which networks does it support?
Aave V2 is an older protocol version, so check that its specific markets and interface remain supported before moving funds. Aave’s current product pages emphasize newer versions, and support for one Aave version does not mean every V2 market is actively maintained or available through the same app. V2 deployments are associated with Ethereum, Polygon and Avalanche, but available assets and liquidity can differ by chain. Verify the network, contract and market using Aave’s official documentation and interface, rather than relying on search ads or a copied link. Check current liquidity and transaction costs before supplying, and make sure you can repay any borrowing plan if rates or collateral values move. If the exact V2 market is not clearly accessible through official Aave channels, do not connect your wallet or approve a transaction.
Before you deposit: a quick checklist
- Verify the exact V2 market and contract through Aave’s official documentation before connecting.
- Check the network, supported asset, current liquidity and transaction gas.
- Review the live supply or borrow rate; rates can change with market demand.
- If borrowing, leave a collateral buffer to reduce liquidation risk.
- Never approve a wallet transaction you do not understand.
5 steps
How to get started with Aave V2
- 1
Find the intended Aave V2 market through Aave’s official documentation or interface.
- 2
Confirm the blockchain network, token contract, market liquidity and transaction cost.
- 3
Connect a compatible wallet and keep the network’s native token available for gas.
- 4
Supply only an amount you can afford to risk, then review rates and collateral requirements.
- 5
If borrowing, monitor your health factor and keep enough collateral buffer to withstand price changes.
Plain English
Jargon explained
- Collateral
- Crypto supplied as security for a loan; its value must stay high enough to avoid liquidation.
- Gas
- A blockchain transaction fee paid to process an action such as a deposit or withdrawal.
- Health factor
- A measure of how close a borrowing position is to having its collateral liquidated.
Quick answers about Aave V2
What is an Aave flash loan?
A flash loan is borrowed and repaid within one blockchain transaction, usually for a specific DeFi operation. It is an advanced feature and is not a typical way to borrow for personal spending.
Are Aave V2 supply rates fixed?
Supply rates vary with the asset market’s supply and borrowing demand, so they are not fixed or guaranteed. Check the current rate for the exact V2 market before depositing.
What is the AAVE token used for?
AAVE is Aave’s governance token, used in decisions about the protocol. Holding AAVE is not the same as supplying assets to a lending market, and it does not guarantee lending returns.
Compare
Aave V2 alternatives
Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.
Dolomite is a multi-chain DeFi lending protocol with borrowing and yield tools; it merits a look, but carries contract and liquidation risks.
SparkLend is an on-chain lending protocol with governance-set rates; it merits a look, but check market risks and withdrawal liquidity first.
Gearbox is an on-chain lending and credit protocol; it is worth researching, but check each market’s fees, risks and restrictions.
Same category
More Lending dApps
Aave is a non-custodial crypto lending protocol with a long track record, but variable rates, smart-contract and liquidation risks matter.
NAVI Lending is a Sui crypto lending protocol with variable rates, audit claims and the usual smart-contract and liquidation risks.
Morpho is onchain lending infrastructure for crypto markets and vaults; it is worth a look if you understand the contract and liquidity risks.
Kamino Finance is a Solana lending and liquidity protocol; it may suit DeFi users, but check market risks and audit details first.
Compound is an Ethereum crypto lending protocol with variable rates; it is worth researching, but contract and liquidation risks matter.
Aave V4 is a modular DeFi lending protocol; its non-custodial design is a plus, but check V4-specific risks before using it.
Same chain
More on Ethereum
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Guides
Guides that mention Aave V2
DeFi
What Is Aave’s Rise and What Could Come Next?Aave is a non-custodial crypto lending protocol: users can supply assets to earn variable returns or borrow against collateral. Its next phase may involve broader markets and chains, but growth is not guaranteed—and lending still carries liquidation, contract and market risks.
DeFi
What Was the 2020 DeFi Blueprint?The 2020 DeFi blueprint was not one official plan, but a set of ideas that took off together: open protocols, token incentives and apps that could build on one another. Learn what it changed, what risks it revealed, and what still matters in 2026.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.