Zest V1 Review: Is It Safe to Lend on Stacks?
Zest V1 is a Stacks-based lending market for supplying crypto or borrowing against collateral. It has a public product and a claimed lending track record, but audit details, fees and key usage terms are not published.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Zest V1 may suit Stacks users who understand on-chain lending and are comfortable checking market terms themselves. Zest describes an operating lending history and an open-source product, but does not publish audit details, a clear fee schedule or key withdrawal rules. Its separate Bitcoin Collateral Vaults should not be confused with V1. Treat it as a higher-risk lending option and verify the current market and transaction details before depositing.
Our verdict:Use with caution5.5/10
HelpfulCoin report card
Use with caution5.5/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (4.8 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- – (not graded)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- C (5.5 out of 10)
- ReputationHow established and openly run it is.
- C (6.2 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Zest V1 at a glance
- Category
- Lending
- Product
- On-chain lending market
- Chain
- Stacks
- Token
- ZEST
- Audit
- Audit details not published
- Fees
- No published fee schedule
- KYC
- Policy not published
- Value locked
- $1.91M−15.5% 7d
- Last checked
Green flags and red flags
Reassuring
- Zest describes its lending products as open source and on-chain.
- Zest claims more than two years of mainnet lending experience and no bad debt.
- Binance Labs announced an investment in Zest in May 2024.
Be careful about
- Zest does not publish audit details for V1.
- Fees, withdrawal limits and market-specific terms are not clearly published.
- Do not assume V1 deposits use the separate Bitcoin Collateral Vault design.
What is Zest V1 and what can you do with it?
Zest V1 is an on-chain lending market on Stacks where you can supply crypto to earn interest or borrow against collateral. It is part of Zest Protocol, which describes itself as Bitcoin-focused DeFi. The ZEST token is the protocol’s native token, but Zest does not explain in its product information whether you need it to lend or borrow. Zest also describes Bitcoin Collateral Vaults, a different way to borrow against BTC while keeping it on Bitcoin. Do not assume that feature works like the original Stacks market: check which product and assets the app is showing before depositing. Lending and borrowing carry risks, including losses if collateral falls in value or a smart contract has a vulnerability.
Is Zest V1 safe to lend on?
Zest V1 has some reassuring features, but the information published by Zest is not enough to treat it as low-risk. Lending is handled on-chain, and Zest describes its code as open source. The team also claims more than two years of mainnet lending experience with no bad debt and no BTC lost. Those are useful claims, not a guarantee against future losses. Zest does not publish audit details for V1, so you cannot use an independent audit report to judge its contract security. Smart-contract bugs, collateral liquidations and problems with a connected wallet or blockchain can still put funds at risk. Only deposit an amount you can afford to lose, and inspect the contract and current risk information before approving transactions.
Is Zest V1 legit, and who runs it?
Zest appears to be a real protocol with a public product and a history on Stacks, but its public information leaves important questions unanswered. Zest says it is built by people who contributed to Stacks infrastructure and operated Bitcoin-focused lending markets; it does not name the individual team members in the product information. Binance Labs announced an investment in Zest in May 2024, which is a positive signal, but investment does not guarantee the safety or success of a lending market. Zest also claims more than two years of mainnet lending experience and zero bad debt. Treat that track record as a project claim, not an assurance that deposits cannot lose value. Check the live app, contract details and current risk disclosures before using it.
What fees and interest rates does Zest V1 charge?
The exact cost of using Zest V1 is not published in its product information. Expect Stacks transaction fees when you supply, borrow, repay or withdraw, and expect borrowing to incur interest. The interest rate and any protocol fees can vary by market, and Zest does not publish a clear fee schedule here. Check the rate and any transaction costs in the app immediately before confirming a transaction; do not assume an advertised yield is fixed or guaranteed. Borrowing also has a potential indirect cost: if collateral value falls enough, your position may be liquidated and you could lose part of your collateral. Compare the displayed supply and borrow rates, and understand the liquidation conditions, before committing funds.
How do you use Zest V1?
To use Zest V1, open Zest’s official app, connect a wallet that supports Stacks, and check that the app is showing the V1 lending market. Review the supported asset, displayed rate and transaction details before supplying funds. To borrow, first supply eligible collateral, then review the borrowing limit and liquidation conditions before confirming. Repaying the loan generally comes before withdrawing collateral that is securing it. Zest’s product information does not spell out which wallets are supported, the exact market-by-market rules or a complete transaction guide, so use its current documentation and the app’s transaction prompts rather than guessing. Start with a small transaction if you are unfamiliar with Stacks, and never share your recovery phrase or private keys.
How do Zest V1 deposits and withdrawals work?
You can move funds into Zest V1 by supplying a supported asset from a Stacks wallet, but the exact supported deposit and withdrawal options depend on the market shown in the app. Zest does not publish general deposit or withdrawal limits, processing times, or a complete withdrawal schedule. On-chain actions also require transaction fees and may depend on the Stacks network. If you borrowed against an asset, repay the debt before expecting to withdraw collateral that is still securing the loan. Check the app for any market-specific restrictions and confirm the destination address and network before signing. Zest does not publish a KYC policy for V1, so check its terms and app requirements before depositing; do not assume an account or identity check will never be required.
Are Zest V1 and Zest Bitcoin Collateral Vaults the same thing?
No—Zest V1’s Stacks lending market and Zest’s Bitcoin Collateral Vaults are different product concepts. V1 is presented as a lending market on Stacks. Separately, Zest describes Bitcoin Collateral Vaults that lock BTC in a self-custodial Taproot vault on Bitcoin while representing the vault’s state on another chain. Zest says those vaults use BitVM fraud proofs and provide a programmatic, debt-free withdrawal path. These are meaningful technical claims, but they do not tell you that the vault system has the same assets, fees, risks or operating status as V1. Before depositing BTC, verify that the specific vault product is live, understand its recovery process and read its technical documentation. Do not treat a claim about BTC staying on Bitcoin as proof that every Zest V1 deposit works that way.
Before you deposit: a quick checklist
- Confirm the app is showing Zest V1 on Stacks, not a separate Bitcoin Collateral Vault product.
- Check the supported asset, current interest rate, transaction costs and liquidation conditions before signing.
- Verify the app and contract details through Zest’s official channels; never share your wallet recovery phrase.
- Read the current withdrawal rules and terms, including any KYC requirements, before depositing.
4 steps
How to get started with Zest V1
- 1
Open Zest through its official channels and confirm the app is showing the V1 Stacks lending market.
- 2
Connect a compatible Stacks wallet and check the market’s supported asset and current terms.
- 3
Review rates, fees, collateral requirements and liquidation conditions before supplying or borrowing.
- 4
Make a small test transaction first, then check repayment and withdrawal requirements before adding funds.
Plain English
Jargon explained
- Collateral
- Assets you deposit to support a loan; they can be liquidated if their value falls too far.
- Liquidation
- A process that sells collateral when a borrower no longer meets the market’s safety requirements.
- Gas fee
- A transaction cost paid to the blockchain network, separate from any protocol fee.
Quick answers about Zest V1
Do you need ZEST tokens to use Zest V1?
Zest describes ZEST as its native token, but does not explain whether holding it is required to use V1 or what rights it gives holders.
Does Zest V1 require KYC?
Zest does not publish a clear KYC policy for V1. Check its current terms and app requirements before connecting or depositing.
Can you use Zest V1 on a phone?
Zest’s product information does not specify V1 support for a particular mobile wallet or mobile app. Confirm compatibility with the wallet you plan to use before depositing.
Compare
Zest V1 alternatives
Granite is a Stacks lending protocol for stablecoin loans against sBTC, but it carries contract, collateral, and liquidation risks.
Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.
Dolomite is a multi-chain DeFi lending protocol with borrowing and yield tools; it merits a look, but carries contract and liquidation risks.
Save is a lending protocol on Solana and Eclipse; it offers crypto lending and borrowing, but carries smart-contract and collateral risks.
Same category
More Lending dApps
Aave is a non-custodial crypto lending protocol with a long track record, but variable rates, smart-contract and liquidation risks matter.
Aave V2 is a non-custodial crypto lending protocol with audited code, but older-version and smart-contract risks warrant care.
NAVI Lending is a Sui crypto lending protocol with variable rates, audit claims and the usual smart-contract and liquidation risks.
Morpho is onchain lending infrastructure for crypto markets and vaults; it is worth a look if you understand the contract and liquidity risks.
Kamino Finance is a Solana lending and liquidity protocol; it may suit DeFi users, but check market risks and audit details first.
Compound is an Ethereum crypto lending protocol with variable rates; it is worth researching, but contract and liquidation risks matter.
Same chain
More on Stacks
Xverse Pool lets users delegate STX for BTC rewards, but check its variable returns, 500 STX minimum and revocation terms.
Gate is a long-running centralized exchange with extensive crypto markets, but custody and proof-of-reserves limitations merit caution.
Bitflow is a Stacks DEX for swaps and liquidity, with useful Bitcoin-focused tools but incomplete public fee and audit details.
Bitget is a centralized crypto exchange with derivatives and stock-related products; its reserve claims are useful, but verify custody and terms.
Wormhole is cross-chain infrastructure for moving assets and messages; its security measures help, but a major exploit makes careful use essential.
StackingDAO offers liquid staking on Stacks, but unclear fees, custody and withdrawal details call for caution.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.