Skip to content
HelpfulCoin

Is Save Safe and Legit? Solana Lending Review

Save is a Solana lending protocol for depositing crypto to earn interest or borrowing against deposits. Key details such as audits, fees, and live pool rates are not clear from its app information.

Researched and written by the HelpfulCoin teamChecked 9 questions answered

The short answer

Save may suit experienced Solana users who understand smart-contract lending and can verify the live pool terms themselves. It offers deposits for interest and borrowing against collateral, but key trust checks—including a public audit report, fees, team details, and usable pool data—are not clear. The dashboard shows zero deposits and borrows, so do not assume liquidity is available. Also verify the domain: Save is not shown to be connected to the similarly named Save Doge Token.

Our verdict:Use with caution4.9/10

HelpfulCoin report card

Use with caution

4.9/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
D (4.2 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
D (5.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
D (5.0 out of 10)
ReputationHow established and openly run it is.
F (3.5 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Savedogetoken at a glance

Category
Lending
Product
Solana lending and borrowing protocol
Chain
Solana
Token
None identified for the protocol
Fees
Not published in app information
Audit
No audit report shown
KYC
Requirements not published
Last checked

Green flags and red flags

Reassuring

  • Save provides sections for documentation, security information, and a changelog.
  • The app clearly identifies its product as a Solana lending and borrowing protocol.

Be careful about

  • Save does not show an audit report, published fee schedule, or named operating team in its app information.
  • The dashboard displays zero deposits and borrows, and its pool asset list is loading.
  • The Savedogetoken name can be confused with a separate BNB Chain token called Save Doge Token.

What is Save and what can you do with it?

Save is a Solana-based DeFi lending and borrowing protocol. You can deposit supported crypto assets into pools to earn interest, or use deposits as collateral to borrow other assets. Save describes itself as permissionless, meaning its interface is designed for people to connect a compatible wallet rather than open a conventional bank account. The homepage also has sections for pools, rewards, and saveSOL, but it does not explain those features in enough detail to assess their terms. One naming point matters: the supplied name, Savedogetoken, does not match the Save lending protocol at save.finance. Public reporting also point to a separate BNB Chain token called Save Doge Token (SAVEDOGE). Do not assume that token is connected to this Solana lending app; verify the exact domain and token before taking any action.

Is Save safe to use for lending on Solana?

Save’s safety is difficult to assess from its public-facing app information alone. Depositing into a DeFi lending pool means placing assets under the control of protocol smart contracts; a wallet connection does not make those assets risk-free or guarantee that withdrawals will always be available. Save has a Security section, but the app information does not provide an audit report or describe a licence, insurance, or incident history. Those omissions are not proof of a problem, but they leave important checks unanswered. The dashboard currently shows $0 for total deposits, borrows, and TVL, and its asset table is still loading. TVL means the value of crypto deposited in a protocol; a zero display may reflect a live dashboard state, but it gives no evidence of active liquidity. Treat Save as an unaudited-by-public-evidence risk until you can verify security documentation independently, and avoid depositing money you cannot afford to lose.

Is Save legit, and who runs the Save protocol?

Save is identifiable as a Solana lending protocol, but the public information here is not enough to judge its operating team or track record. The app shows “Save” as the owner and offers a changelog, documentation, and a Security section. It does not name the people or company responsible, state when the protocol launched, or provide a clear account of past performance or incidents. A permissionless interface can be used without a traditional sign-up, but that does not establish who maintains the software or who can change protocol settings. There is also a potential name mix-up: a search result identifies a BNB Chain token called Save Doge Token (SAVEDOGE), while Save at save.finance presents a Solana lending product. No connection between them is established by the project information. Check the domain and Solana program details carefully before connecting a wallet, and do not rely on a similarly named token as evidence of Save’s legitimacy.

What fees and interest rates does Save charge?

Save does not publish a clear fee schedule, borrowing rate, or current pool APR in the information shown, so the total cost of using it cannot be calculated from the dashboard. Lending protocols commonly pay depositors interest funded by borrowers, while borrowing costs depend on the asset pool and can change as utilization changes. Solana network transactions also incur network fees, separate from any protocol charge. Save’s pool table is still loading, so no asset-specific rates are available to compare. Before depositing or borrowing, check Save’s documentation and the live pool details for deposit and withdrawal fees, interest-rate calculations, liquidation rules, and any other charges. Do not treat a displayed APR as guaranteed income: rates can change, and lending returns carry smart-contract and liquidity risks. If Save does not clearly show the rate and applicable fees for the exact asset, wait rather than approving a transaction you cannot price.

How do you use Save to lend or borrow crypto?

You use Save by connecting a compatible Solana wallet, selecting a pool, and approving a deposit or borrowing transaction in that wallet. Save describes deposits as a way to earn interest and says they may be used as collateral for borrowing. Before approving anything, confirm the app domain, the asset and amount, the transaction details, and the pool’s current terms. The dashboard asks users to connect a wallet and shows pool information, but its asset list is currently loading, so the available assets and rates cannot be checked from the displayed interface. Start by reading the protocol documentation and security information, then test with a small amount only if the pool details are clear and independently verified. Never share a wallet recovery phrase or approve a transaction you do not understand. Disconnecting a wallet does not undo a deposit or revoke token permissions; manage those separately in your wallet if needed.

How do Save deposits and withdrawals work, and are there limits?

Save’s deposit and withdrawal limits, processing times, supported wallet list, and any KYC requirements are not published in the app information shown. The interface offers wallet connection and describes Save as permissionless, but that is not enough to confirm whether every action is available without identity checks or whether any restrictions apply. In a typical Solana lending pool, you deposit an asset from your wallet and later request a withdrawal back to that wallet; withdrawals can depend on available pool liquidity and protocol rules. Borrowing also depends on collateral value and the protocol’s loan-to-value limits, which Save’s live table is not currently showing. The dashboard displays an outflow limit of $0 per 0 seconds, so do not assume withdrawals are functioning or that the displayed figure is a usable limit. Check current pool liquidity, withdrawal conditions, and transaction details before depositing, and confirm the returned asset and any fees before borrowing.

Before you deposit: a quick checklist

  • Confirm you are using save.finance, not a similarly named Savedoge token or BNB Chain contract.
  • Check whether Save publishes an audit and read its current security documentation before depositing.
  • Verify the pool’s live liquidity, APR, borrowing rate, withdrawal rules, and liquidation terms.
  • Review the wallet transaction carefully and start small if you decide the risks are acceptable.

4 steps

How to get started with Savedogetoken

  1. 1

    Type save.finance yourself and confirm that the app identifies itself as the Solana lending protocol.

  2. 2

    Read Save’s documentation and security section; look for independent audit details and current protocol terms.

  3. 3

    Check the selected pool’s assets, liquidity, rates, fees, collateral rules, and withdrawal conditions before connecting.

  4. 4

    Connect a compatible Solana wallet, review each transaction in the wallet, and avoid depositing more than you can afford to lose.

Plain English

Jargon explained

Collateral
Crypto deposited in a pool to support lending, often used to calculate a borrower’s safety buffer.
LTV
The share of collateral value a borrower may borrow, subject to the protocol’s rules.
TVL
The value of crypto deposited in a protocol.

Quick answers about Savedogetoken

Does Save require KYC?

The app describes Save as permissionless and prompts users to connect a wallet. It does not publish clear KYC requirements, so check the current terms before using it.

Is Save the same as Save Doge Token?

No. Save is presented as a lending and borrowing protocol on Solana, while the search result refers to a BNB Chain token called Save Doge Token (SAVEDOGE). No connection between them is established.

Does Save currently have active lending pools?

Save’s dashboard currently displays $0 for total deposits, total borrows, and TVL, while the asset table is loading. Check the live app before assuming pools have usable liquidity.

Compare

Savedogetoken alternatives

All alternatives
Save logo

Save

Lending

Score 5.8 out of 10

Save is a lending protocol on Solana and Eclipse; it offers crypto lending and borrowing, but carries smart-contract and collateral risks.

TVL $59.9M−14.3%Solana · Eclipse
Kamino Lend logoScore 5.8 out of 10

Kamino Lend is a Solana crypto lending protocol; it may suit informed users, but smart-contract and liquidation risks warrant caution.

TVL $1.13B−3.5%Solana
Jupiter Lend logoScore 5.5 out of 10

Jupiter Lend is an active Solana lending and borrowing service, but its unlisted audit and unpublished fees warrant caution.

TVL $926M+1.2%Solana
Project 0 logo

Project 0

Lending

Score 5.0 out of 10

Project 0 is a Solana lending app with portfolio-backed borrowing; its live markets are worth a look, but key safety and fee details need checking.

TVL $44.9M−16.7%Solana
Morpho Blue logoScore 6.1 out of 10

Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.

TVL $10.1B−7.0%Ethereum · Base · Robinhood Chain +41
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.1B−9.2%Ethereum · Base · Arbitrum +18

Same category

More Lending dApps

Lending rankings
Compound V3 logoScore 6.8 out of 10

Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.

TVL $1.08B−11.7%Ethereum · Arbitrum · Base +7

Aave

Lending

Score 6.8 out of 10

Aave is a non-custodial crypto lending protocol with a long track record, but variable rates, smart-contract and liquidation risks matter.

Ethereum
Aave V2 logo

Aave V2

Lending

Score 6.7 out of 10

Aave V2 is a non-custodial crypto lending protocol with audited code, but older-version and smart-contract risks warrant care.

TVL $88.0M−9.5%Ethereum · Polygon · Avalanche
NAVI Lending logoScore 6.5 out of 10

NAVI Lending is a Sui crypto lending protocol with variable rates, audit claims and the usual smart-contract and liquidation risks.

TVL $97.2M−22.4%Sui

Morpho

Lending

Score 6.5 out of 10

Morpho is onchain lending infrastructure for crypto markets and vaults; it is worth a look if you understand the contract and liquidity risks.

Ethereum · Base
Kamino Finance logoScore 6.5 out of 10

Kamino Finance is a Solana lending and liquidity protocol; it may suit DeFi users, but check market risks and audit details first.

Solana

Same chain

More on Solana

Solana rankings
Lido logo

Lido

Staking Pool

Score 7.1 out of 10

Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.

TVL $17.8B−14.9%Ethereum · Solana · Terra +2
Bitvavo logo

Bitvavo

Centralized Exchanges

Score 6.9 out of 10

Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.

TVL $329M+7.8%Ethereum · Bitcoin · Solana +9
Across logo

Across

Cross Chain Bridge

Score 6.8 out of 10

Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.

TVL $13.4M−11.3%Ethereum · Arbitrum · Optimism +19
Sablier Lockup logoScore 6.8 out of 10

Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.

TVL $1.54M−10.7%Ethereum · Polygon · Arbitrum +25
Laine SOL logo

Laine SOL

Staking

Score 6.8 out of 10

Laine SOL offers native and liquid Solana staking, with a stated 0% pool fee but added risks for laineSOL holders.

TVL $859K−17.7%Solana

Quicknode

Infrastructure

Score 6.8 out of 10

Quicknode is a blockchain infrastructure platform for developers, worth considering for RPC and data tools but with pricing and audit details to check.

Solana

Where the answers come from

Sources

No public sources were recorded for this page.

Last checked . Something wrong or out of date? Let us know and we will fix it.