Is Resupply Safe After Its 2025 Exploit?
Resupply is an Ethereum protocol for borrowing reUSD against crvUSD or frxUSD lending positions. A reported 2025 exploit involving nearly $9.6 million makes careful scrutiny essential.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Resupply may interest experienced Ethereum DeFi users who understand collateralized stablecoin borrowing, but it is difficult to recommend for funds you cannot afford to lose. The protocol lets you borrow reUSD against crvUSD or frxUSD lending positions, with a variable rate and liquidation risk. A reported 2025 exploit involving nearly $9.6 million is the central concern, and the project does not explain its remediation in the information described here. Check current security and governance updates before interacting.
Our verdict:Avoid3.8/10
HelpfulCoin report card
Avoid3.8/ 10 overall
Serious problems, or it no longer works.
- SafetyHow funds are held, audits, licence, incidents.
- F (2.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- D (5.0 out of 10)
- ReputationHow established and openly run it is.
- D (5.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Resupply at a glance
- What it is
- Ethereum protocol for borrowing reUSD
- Collateral
- crvUSD or frxUSD lending positions
- Token
- RSUP
- Borrow rate
- Variable; minimum 2%
- Audits
- Two audit entries reported
- Security incident
- 2025 exploit; nearly $9.6m reported stolen
- Chains
- Ethereum
- Value locked
- $42.0M−10.6% 7d
- Last checked
Green flags and red flags
Reassuring
- Resupply publishes governance, documentation and code-related resources.
- The protocol describes an Insurance Pool and a reUSD redemption mechanism.
Be careful about
- A June 2025 exploit was reported to have stolen nearly $9.6 million.
- Resupply does not explain the exploit’s remediation or recovery in the information described here.
- The borrowing rate is variable, and collateral can be liquidated.
- An Insurance Pool is not a guarantee against losses.
What is Resupply and how does it work?
Resupply is an Ethereum DeFi protocol that lets users borrow reUSD against crvUSD or frxUSD supplied to lending markets. In plain terms, you deposit one of those stablecoins into a supported Curve Lend or Fraxlend market, then use the resulting lending position as collateral to borrow reUSD. The protocol says the deposit can continue earning the lending market’s yield while you borrow. Resupply also has RSUP, a token used for rewards and governance. This is not a simple stablecoin savings account: borrowing adds debt and liquidation risk, and a lending-market or protocol failure could affect your collateral. A 2025 exploit is an important reason to approach it cautiously.
Is Resupply safe after the 2025 exploit?
Resupply carries substantial safety risk, particularly because a security flaw was exploited in June 2025 and a report said nearly $9.6 million was stolen. Resupply’s homepage describes its contracts as immutable and non-custodial and says they were reviewed by auditors, while two audit entries are reported. Those points do not erase the exploit: the project does not explain the incident’s remediation or recovery. Its model also depends on external Curve Lend or Fraxlend markets, and borrowing can lead to liquidation if collateral no longer covers debt. The project describes an Insurance Pool, but that is not a guarantee that losses will be fully covered. No licence is published. Treat funds deposited or borrowed through Resupply as exposed to significant smart-contract and market risk.
Is Resupply legit, and who runs it?
Resupply is a functioning, identifiable DeFi protocol, but that does not establish that it is a good place to trust with funds. Its website says it was made by Convex and Yearn in collaboration with other DeFi participants, and it provides governance, documentation, analytics and code repositories. Those are signs of a project with a public product and development footprint; the site does not name individual operators or publish a clear corporate entity or licence. Two audit entries are reported, but the homepage does not name auditors or explain their scope. Most importantly, a reported June 2025 exploit involving nearly $9.6 million raises serious questions about security and response. Before relying on Resupply, check current governance announcements and contract security information, especially for details of the exploit and any changes made afterward.
What does it cost to borrow reUSD on Resupply?
Resupply’s stated borrowing rate is the highest of three figures: half the selected market’s lending rate, half the sfrxUSD rate, or a 2% minimum. That means the rate can change and may be higher than the floor; it is not a fixed-cost loan. Borrowers may also face Ethereum transaction fees, which vary with network demand, and liquidation costs if their position becomes unsafe. Resupply does not publish a complete fee schedule in the information described here, so check the live transaction and market terms before confirming a position. The protocol says the Insurance Pool earns a fee when it is used for liquidations, but does not give a rate in its homepage description. Consider the cost of repaying reUSD and the possible cost of moving collateral, not just the advertised borrowing rate.
How do you use Resupply to borrow reUSD?
To use Resupply, connect an Ethereum wallet and choose a supported collateral route: crvUSD supplied through Curve Lend or frxUSD supplied through Fraxlend. The position is then used as collateral for a reUSD loan. Resupply describes the borrowing rate as variable, so check it along with the collateral and debt figures before borrowing. Borrowing more against a position increases the chance that changes in its value, market conditions or accrued interest could trigger liquidation. The homepage also describes RSUP rewards, but rewards should not be treated as guaranteed income or as protection against losses. Before signing, verify that the app and contract addresses are genuine, read the current market parameters, and understand how you would repay. A wallet connection does not itself mean the protocol has custody of your keys, but smart contracts can still move funds according to the permissions you approve.
How do Resupply withdrawals and repayments work?
Resupply does not publish a clear withdrawal timeline or general withdrawal limits in the information described here. In a typical collateralized borrowing position, you must repay outstanding reUSD and any accrued interest before withdrawing the collateral that secures it; available liquidity and the chosen lending market can also affect what you can withdraw. Do not assume that a wallet transaction will let you take out all collateral while debt remains. Check the position’s repayment and withdrawal requirements in the app before borrowing, and keep enough funds available to repay without relying on a rapid sale of another asset. Resupply is presented as a wallet-connected DeFi protocol rather than a custodial exchange, and its homepage does not describe a bank deposit or cash-out service. It also does not publish a KYC policy; check the current app and documentation for access requirements.
Does Resupply’s Insurance Pool protect reUSD deposits?
Resupply says its Insurance Pool supports liquidations and can help cover losses if an approved lending collateral encounters trouble. Depositors in that pool accept shared risk in return for a share of protocol revenue distributed in reUSD and RSUP emissions. That design may provide a buffer, but it is not deposit insurance: losses could exceed the pool’s resources, and the pool itself depends on the protocol and its assets working as intended. Resupply also describes redemptions as a way to help maintain reUSD’s peg, but the mechanics and any limits should be checked in its current documentation before relying on a redemption. The 2025 exploit makes it especially important not to treat either the Insurance Pool or the peg mechanism as a guarantee. Review the pool’s terms and current balances before deciding whether to deposit reUSD there.
Before you deposit: a quick checklist
- Find Resupply’s current explanation of the June 2025 exploit and verify what remediation was made before depositing.
- Confirm the Ethereum app and contract addresses through Resupply’s official channels before connecting a wallet.
- Check the live borrowing rate, collateral requirements, liquidation rules and available market liquidity.
- Understand repayment requirements and do not rely on the Insurance Pool to cover losses.
4 steps
How to get started with Resupply
- 1
Check Resupply’s current governance and security communications for details of the 2025 exploit and any fixes.
- 2
Verify the official Ethereum app and contract addresses before connecting your wallet.
- 3
Review supported Curve Lend or Fraxlend markets, borrowing rates, liquidation rules and transaction costs.
- 4
Start with an amount you can afford to lose, and understand how you will repay before borrowing reUSD.
Plain English
Jargon explained
- Collateralized borrowing
- A stablecoin loan backed by crypto collateral that can be liquidated if its value no longer covers the debt.
- Liquidation
- A sale of collateral to cover debt when a borrower’s position becomes too risky.
- Insurance Pool
- A pool intended to help absorb losses or support protocol operations, but not a guarantee of repayment.
Quick answers about Resupply
What is the RSUP token?
RSUP is Resupply’s token, used for governance and rewards. The project describes RSUP emissions for eligible users, but rewards can change and do not guarantee a return.
Which networks does Resupply support?
Resupply’s described collateral routes use Ethereum lending markets: Curve Lend for crvUSD and Fraxlend for frxUSD. Check the app for currently supported markets before making a transaction.
Does Resupply have a mobile app?
Resupply describes wallet-based, non-custodial smart contracts, but wallet use does not remove contract risk. Review each transaction and grant only the permissions needed for the action.
Compare
Resupply alternatives
Sky Lending is an Ethereum DeFi borrowing and savings ecosystem; check its fees, collateral rules and audit details before using it.
Liquity V1 lets you borrow LUSD against ETH without ongoing interest, but fees, liquidation risk and independent frontends call for care.
Liquity V2 lets you borrow BOLD against ETH or staked ETH at a rate you choose, but independent frontends and liquidation risk require care.
crvUSD is Curve’s Ethereum stablecoin, backed by crypto collateral; useful for experienced borrowers, but exposed to liquidation and depeg risk.
Frankencoin is a collateral-backed Swiss-franc stablecoin protocol worth a look with caution: ZCHF is not insured cash.
Angle is a multi-chain stablecoin DeFi app for swapping, borrowing and yield; its contract and collateral risks call for caution.
Same category
More CDPs
Maker Governance is a proposal and voting portal for Maker/Sky; it is useful to follow, but check whether an action uses MKR or SKY.
Parallel Protocol V3 mints USDp and offers sUSDp savings; it merits a cautious look because collateral, contract and yield risks remain.
Liquity is an Ethereum protocol for borrowing BOLD against ETH; its user-set rates offer flexibility, but loans and third-party frontends carry risk.
Thala is an Aptos DeFi protocol for Move Dollar borrowing and trading; its audits are a positive sign, but key loan terms need checking.
Inverse Finance is an Ethereum borrowing and yield protocol worth researching, but its smart-contract, liquidation and stablecoin risks call for caution.
Mezo Borrow lets you borrow MUSD against Bitcoin, but missing audit and fee details make it a cautious look.
Same chain
More on Ethereum
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.