Skip to content
HelpfulCoin

Is Liquity V1 Safe? Fees, Risks and How It Works

Liquity V1 is an Ethereum protocol for borrowing the LUSD stablecoin against ETH without ongoing interest. It is non-custodial and immutable, but borrowing still carries fees, liquidation risk and frontend risk.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

Liquity V1 may suit experienced Ethereum users who want to borrow LUSD against ETH without paying ongoing interest. Its non-custodial, immutable design and listed audits are positives, but a one-time fee, gas costs and liquidation risk still matter. The protocol does not operate its own frontend, so choosing a trustworthy interface is part of using it safely. Keep a substantial collateral buffer and verify that you are using V1 rather than V2.

Our verdict:Good, with caveats6.5/10

HelpfulCoin report card

Good, with caveats

6.5/ 10 overall

Worth using if the caveats below don’t affect you.

SafetyHow funds are held, audits, licence, incidents.
C (6.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
B (7.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
C (5.5 out of 10)
ReputationHow established and openly run it is.
B (7.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Liquity V1 at a glance

Type
ETH-backed borrowing protocol
Chain
Ethereum
Collateral
ETH
Borrow
LUSD
Token
LQTY
Audits
2 listed
Borrowing cost
One-time fee; no ongoing interest
Value locked
$131M−11.7% 7d
Last checked

Green flags and red flags

Reassuring

  • Liquity V1 uses smart contracts rather than holding user funds in a company account.
  • The protocol is designed to be immutable, with core rules that cannot be upgraded by an administrator.
  • Two audits are listed for the protocol.

Be careful about

  • A Trove can be liquidated if its collateral ratio falls below 110%.
  • Liquity does not run its own frontend or vet independent frontend operators.
  • Borrowing and redemption fees can vary, and Ethereum gas is an additional cost.
  • Two audits are listed, but their scopes and dates are not stated.

What is Liquity V1 and what can you do with it?

Liquity V1 is an Ethereum borrowing protocol where you lock ETH as collateral and borrow LUSD, a stablecoin designed to track the US dollar. The loan has no ongoing interest, but it is not free: borrowing involves a one-time fee, and Ethereum transactions have gas costs. Liquity V1 is distinct from Liquity V2, which supports additional collateral and issues BOLD. The Liquity website presents V1 and V2 separately, so check that a frontend and its instructions specifically support V1 before connecting a wallet. Liquity V1 is a set of smart contracts rather than a bank or a custodial lender. You manage your position through a compatible frontend, while the contracts handle borrowing, repayments and liquidations.

Is Liquity V1 safe to borrow from?

Liquity V1 has some meaningful protections, but it is not risk-free. Its smart contracts are designed to be immutable, meaning their core rules cannot be upgraded by an administrator. Two audits are listed for the protocol, although the audit names, dates and scopes are not stated in the project details. Audits cannot guarantee that code is free of flaws. The protocol is non-custodial: ETH is held by smart contracts, not a company account. That removes one kind of counterparty risk but leaves smart-contract, oracle, Ethereum-network and frontend risks. A Trove, Liquity’s name for a borrowing position, can be liquidated if its collateral ratio falls below 110%. Liquity does not publish a consolidated incident record or a licence for V1. Do not treat immutability or audits as a promise that funds are safe.

Is Liquity V1 legit, and who operates it?

Liquity V1 is a real, identifiable DeFi protocol associated with the Liquity project, rather than an anonymous lending page. Liquity’s site presents the V1 protocol separately from V2, and the protocol has a public history dating to 2021. Its core rules run on Ethereum smart contracts, and the protocol is described as immutable. Those points support legitimacy, but they do not make every interface using the Liquity name trustworthy. Liquity says it does not run its own frontend; independent operators provide the interfaces users use to access the protocol. Liquity’s site also warns that it has not vetted frontend operators. Liquity does not publish a V1 licence or a consolidated incident record. Check the interface, contract addresses and documentation carefully, and do not assume a frontend is official just because it uses Liquity branding.

What fees does Liquity V1 charge?

Liquity V1 charges a one-time borrowing fee rather than ongoing interest. The minimum borrowing fee is 0.5%, and it can rise with protocol activity, so check the live fee before opening a position. Repaying and closing a position does not mean you pay monthly interest, but Ethereum gas applies to transactions. Redemptions—exchanging LUSD for the collateral backing it—also have a fee that can vary. These costs are separate from any fees charged by an independent frontend or a wallet. A useful estimate should include the borrowing fee, gas for opening and later managing or closing the Trove, and the possibility of liquidation losses if ETH falls sharply. Liquity does not publish a fixed all-in cost because the fee and gas depend on conditions at the time you transact.

How do you use Liquity V1 to borrow LUSD?

To borrow, you need ETH in an Ethereum wallet and a frontend that supports Liquity V1. Connect the wallet only after checking that the interface and contract details are genuine. Deposit ETH into a Trove, choose how much LUSD to borrow, review the one-time fee and collateral ratio, then approve and submit the Ethereum transactions. Liquity V1 requires at least 110% collateralisation, but borrowing close to that minimum leaves little room for an ETH price drop before liquidation. A larger collateral buffer reduces that risk. You will also need ETH left in the wallet to pay gas. Unlike an ordinary loan, the debt does not accrue ongoing interest, but the position still needs monitoring: if its collateral ratio drops below 110%, the Trove can be liquidated. Never rely on a frontend’s display alone; verify the transaction details in your wallet.

How do Liquity V1 deposits and withdrawals work?

You deposit ETH into a Liquity V1 Trove and receive LUSD in your Ethereum wallet; there is no bank deposit or custodial account. To get ETH back, repay the LUSD debt and close the Trove, paying the required Ethereum gas. You can also repay part of the debt while keeping the position open. If you need cash, you would generally have to exchange LUSD through a separate market or service; Liquity does not itself provide a bank withdrawal. The protocol does not set a conventional withdrawal schedule or fiat cash-out limit. Liquity V1 is a smart-contract protocol, not an account-based exchange, so it does not itself conduct ordinary customer KYC. A frontend or another service used to exchange tokens may have its own access rules or identity checks. Keep enough ETH for transaction fees and check the exact amounts before confirming.

What are the main risks of a Liquity V1 Trove?

Liquity V1’s main position risk is liquidation: if ETH falls enough that your Trove’s collateral ratio drops below 110%, the protocol can use collateral to repay the debt. The 110% figure is a liquidation threshold, not a prudent target; keeping more collateral gives a position more room to withstand price swings. LUSD also aims to stay near one US dollar but can trade above or below that level on markets. If you borrow LUSD, you must still be able to repay the amount owed even if its market price changes. A separate risk is choosing an untrustworthy frontend: Liquity does not operate one itself and disclaims vetting the independent operators. V1 is also not V2: V1 uses ETH and LUSD, while V2 has different collateral and borrowing features. Confirm the version and transaction details before signing.

Before you deposit: a quick checklist

  • Confirm the frontend supports Liquity V1, not only V2.
  • Verify the frontend and contract details against Liquity’s V1 documentation.
  • Check the current borrowing fee, your collateral ratio and Ethereum gas costs.
  • Keep a buffer above the 110% liquidation threshold and leave ETH for fees.

5 steps

How to get started with Liquity V1

  1. 1

    Read Liquity V1’s documentation and distinguish its ETH-and-LUSD system from Liquity V2.

  2. 2

    Choose an independent frontend that explicitly supports V1 and verify its details against Liquity documentation.

  3. 3

    Prepare ETH for collateral and additional ETH for Ethereum gas.

  4. 4

    Review the current borrowing fee and set a collateral amount comfortably above the 110% liquidation threshold.

  5. 5

    Check the transaction details in your wallet before opening, managing or closing a Trove.

Plain English

Jargon explained

Trove
A borrowing position that locks collateral and tracks the debt owed.
Collateral ratio
The value of collateral compared with the debt secured by it.
Gas
A fee paid to include a transaction on Ethereum.

Quick answers about Liquity V1

Can you use staked ETH as collateral in Liquity V1?

No. Liquity V1 is deployed on Ethereum and uses ETH as collateral. Liquity V2 is a separate protocol with different features and collateral options.

Is LQTY the stablecoin borrowed from Liquity V1?

No. LQTY is Liquity’s token, while LUSD is the stablecoin borrowers receive in V1. They serve different roles.

Can Liquity V1 liquidate your ETH?

No. A collateralised debt position can be liquidated if its collateral value falls below the protocol’s threshold. ETH price changes can put a Trove at risk.

Compare

Liquity V1 alternatives

All alternatives
Sky Lending logoScore 5.6 out of 10

Sky Lending is an Ethereum DeFi borrowing and savings ecosystem; check its fees, collateral rules and audit details before using it.

TVL $3.80B−10.4%Ethereum
Liquity V2 logoScore 6.1 out of 10

Liquity V2 lets you borrow BOLD against ETH or staked ETH at a rate you choose, but independent frontends and liquidation risk require care.

TVL $69.8M−16.3%Ethereum
crvUSD logo

crvUSD

CDPs

Score 5.6 out of 10

crvUSD is Curve’s Ethereum stablecoin, backed by crypto collateral; useful for experienced borrowers, but exposed to liquidation and depeg risk.

TVL $74.0M−28.8%Ethereum
Frankencoin logoScore 5.8 out of 10

Frankencoin is a collateral-backed Swiss-franc stablecoin protocol worth a look with caution: ZCHF is not insured cash.

TVL $48.5M−18.5%Ethereum
Angle logo

Angle

CDPs

Score 5.2 out of 10

Angle is a multi-chain stablecoin DeFi app for swapping, borrowing and yield; its contract and collateral risks call for caution.

TVL $1.55M−3.9%Ethereum · Arbitrum · Polygon +5
Reservoir Protocol logoScore 5.2 out of 10

Reservoir Protocol is a DeFi stablecoin and yield system worth researching, but key safety and withdrawal terms need checking first.

TVL $91.4M−0.9%Monad · Ethereum · Plasma +14

Same category

More CDPs

CDPs rankings
Makerdao logoScore 6.8 out of 10

Maker Governance is a proposal and voting portal for Maker/Sky; it is useful to follow, but check whether an action uses MKR or SKY.

Ethereum
Parallel Protocol V3 logoScore 5.9 out of 10

Parallel Protocol V3 mints USDp and offers sUSDp savings; it merits a cautious look because collateral, contract and yield risks remain.

TVL $853K+0.1%Hyperliquid L1 · Base · Ethereum +2
Score 5.8 out of 10

Liquity is an Ethereum protocol for borrowing BOLD against ETH; its user-set rates offer flexibility, but loans and third-party frontends carry risk.

Ethereum
Thala CDP logoScore 5.7 out of 10

Thala is an Aptos DeFi protocol for Move Dollar borrowing and trading; its audits are a positive sign, but key loan terms need checking.

TVL $415K−4.0%Aptos
Inverse Finance Frontier logoScore 5.6 out of 10

Inverse Finance is an Ethereum borrowing and yield protocol worth researching, but its smart-contract, liquidation and stablecoin risks call for caution.

TVL $4.36M−10.7%Ethereum
Mezo Borrow logoScore 5.6 out of 10

Mezo Borrow lets you borrow MUSD against Bitcoin, but missing audit and fee details make it a cautious look.

TVL $1.14M−11.2%Mezo

Same chain

More on Ethereum

Ethereum rankings
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.30B−11.9%Ethereum · Base · Arbitrum +38
Lido logo

Lido

Staking Pool

Score 7.1 out of 10

Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.

TVL $17.9B−13.0%Ethereum · Solana · Terra +2
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.0B−8.2%Ethereum · Base · Arbitrum +18
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $720M−13.4%Ethereum · Base · Polygon +14
Ethereum Finance logoScore 7.1 out of 10

Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.

Ethereum
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2

Guides

Guides that mention Liquity V1

All guides
  • DeFi

    How Does Stablecoin Backing Work?

    A stablecoin’s “backing” is what is meant to support its value, such as cash reserves, short-term government debt or crypto locked in a smart contract. Learn how different backing models work, what can go wrong, and what to check before holding or using a stablecoin.

  • DeFi

    What Are Crypto Liquidations and How Do They Work?

    Crypto liquidation is the forced closing of a leveraged trade or the sale of collateral when it can no longer safely cover a loan. Learn what triggers it, how it works on exchanges and DeFi lending protocols, and how to reduce the risk of losing collateral.

  • DeFi

    What Are Crypto Loans and How Do They Work in 2026?

    A crypto loan lets someone borrow cash or tokens by pledging cryptocurrency as collateral. Learn how collateral, interest, repayment and liquidation work—and what to check before borrowing.

  • DeFi

    What Are the Top 10 Ethereum DeFi DApps?

    Ethereum DeFi apps let you swap tokens, lend or borrow crypto, stake ETH, and use onchain financial services from a wallet. This guide compares 10 notable options and explains the risks and checks to make before connecting.

  • DeFi

    What Is MakerDAO and How Does It Work?

    MakerDAO is the community-governed DeFi system behind DAI, a stablecoin designed to track the US dollar. Learn how collateral vaults, fees and liquidations work—and how the project’s transition to Sky affects its names and tokens.

  • DeFi

    What Was Mirror Protocol and How Did MIR Debt Work?

    Mirror Protocol was a Terra-based synthetic-asset project, and MIR was its governance token—not the debt or collateral itself. Its present operating status is unclear, so treat descriptions of how it worked as historical and verify everything before considering an interaction.

Where the answers come from

Sources

  1. defillama.com/protocol/liquity-v1(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.