Is MortgageFi Safe? How Its Crypto Mortgages Work
MortgageFi is a DeFi protocol for crypto-backed, fixed-term loans and interest-earning liquidity pools. Its no-price-liquidation design still carries smart-contract, default and withdrawal risks.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
MortgageFi may suit experienced DeFi users who understand crypto lending and want to explore fixed-term borrowing or pool lending. Its smart-contract custody and lack of price-based liquidations are useful design choices, but they do not remove default, contract or liquidity risk. Audit reports, licence details, standard fees and withdrawal rules are not published in the project information reviewed. Check the exact pool terms and contract before depositing; avoid using funds you cannot afford to lose.
Our verdict:Use with caution5.7/10
HelpfulCoin report card
Use with caution5.7/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (5.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- C (6.0 out of 10)
- ReputationHow established and openly run it is.
- D (5.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
MortgageFi at a glance
- Category
- Lending
- Product
- Crypto mortgage and lending protocol
- Model
- Shared liquidity pools
- Networks
- Base and Ethereum pools shown
- Token
- None identified
- Audits
- Two listed; reports not published
- Loan term
- Up to 30 years
- Value locked
- $791K−14.0% 7d
- Last checked
Green flags and red flags
Reassuring
- MortgageFi describes the protocol as open source and non-custodial, with the mortgaged asset held by a smart contract.
- The project lists two audits, although their names and reports are not published in the information reviewed.
- The site distinguishes its live shared-pool product from the upcoming peer-to-peer matching engine.
Be careful about
- Under-collateralized loans can expose lenders to losses if borrowers do not repay.
- MortgageFi does not publish the audit reports, licence details or a complete incident history.
- The protocol does not publish general withdrawal limits, timing or a standard fee schedule.
- The project’s network information differs; verify the active pool and chain in the app before sending funds.
What is MortgageFi and how does it work?
MortgageFi is a DeFi lending protocol for borrowing against digital assets and earning interest by supplying liquidity. Borrowers put down a deposit, receive a supported asset through a mortgage-style contract, then repay over an agreed term. The asset stays held by a smart contract until the borrower pays it off; the protocol says there are no price-based liquidations. Lenders deposit into separate shared pools, and their yield comes from borrower interest. MortgageFi advertises terms of up to 30 years, flexible repayments and early repayment, which may carry a fee. It is not a conventional home mortgage service: the collateral and loans are crypto assets, and borrowers can take a position larger than their deposit. The live pools shown include cbBTC against USDC on Base and WETH against USDC on Ethereum mainnet. A peer-to-peer matching engine is described as upcoming, not currently live.
Is MortgageFi safe to lend on or borrow from?
MortgageFi uses smart contracts to hold the mortgaged asset, but that does not make a loan or deposit risk-free. The protocol describes its loans as under-collateralized and says missed payments trigger a structured resolution rather than a price-based liquidation; the details and likely outcomes of that process matter, so read the contract terms before borrowing or lending. Two audits are listed, but MortgageFi does not publish the audit names or reports in the information reviewed, so their scope and findings cannot be assessed. The protocol describes itself as open source and non-custodial, but smart-contract bugs, pool losses and repayment defaults remain possible. MortgageFi does not publish a licence or a record of security incidents. Treat supplied liquidity as money at risk, and do not deposit funds you cannot afford to lose.
Is MortgageFi legit, and who is behind it?
MortgageFi appears to be an identifiable, active DeFi lending project, but its operating history and public accountability are not fully clear. The site says its contributors have worked in DeFi since 2018 and previously co-founded a protocol that reached more than $1.5 billion in TVL; it does not name those contributors or the prior protocol in the text presented. That makes the experience claim difficult to verify from the project’s own description. MortgageFi says it has opened more than 400 mortgages, but does not provide dates or an independently verifiable borrower history alongside that claim. The protocol’s docs and live-market descriptions suggest a functioning product, while its matching engine is still described as upcoming. No licence is published. In short, MortgageFi is more than an unexplained project name, but readers should check its contracts, audit reports, team disclosures and repayment terms before relying on its claims.
What does MortgageFi cost for borrowers and lenders?
MortgageFi does not publish a single fixed borrowing or lending fee schedule in the project information. Borrowers should expect to pay interest at the rate and on the terms attached to a particular mortgage; lenders set terms in the pool model. Early repayment may also incur an Early Repayment Fee, and the amount depends on the agreement. The protocol does not state a general platform fee, transaction fee, or pool withdrawal charge in the information reviewed. Because this is on-chain, wallet transactions can also incur network gas fees, which vary with network activity and are separate from any MortgageFi charge. Before accepting a loan, check the full repayment amount, rate, down payment, term and early repayment fee. Before supplying liquidity, check how yield is calculated and whether any withdrawal restrictions or costs apply to that specific pool.
How do you get started with MortgageFi?
To use MortgageFi, connect a compatible wallet to the app and select a live market on its supported network. Lenders choose a pool and deposit its asset into a shared vault; borrowers select a supported asset, set a down payment and accept the mortgage terms available in that market. The smart contract holds the asset until repayment, while the borrower makes payments under the agreed schedule. MortgageFi says borrowers can make flexible payments and repay early, subject to any applicable early repayment fee. The project describes the pool model as live and the peer-to-peer matching engine as upcoming, so do not assume every advertised feature is available now. Check the network, token address, interest rate, payment requirements and contract details before confirming wallet transactions. A crypto wallet and funds for network gas are needed; the project does not publish a credit-check process, but that does not establish its full identity-verification policy.
How do MortgageFi deposits, repayments and withdrawals work?
You can put assets into MortgageFi pools, but the protocol does not publish general deposit or withdrawal limits, processing times, or a universal withdrawal schedule. A lender’s funds are supplied to a shared vault, so access may depend on pool liquidity and the pool’s contract rules; do not assume an immediate exit just because the protocol is non-custodial. Borrowers repay according to their mortgage terms, and the asset is released from the smart contract after payoff. The amount needed to close a loan may include interest and an early repayment fee, depending on the agreement. MortgageFi says it does not use credit checks or application forms, but it does not publish a complete KYC policy. Before depositing or borrowing, review the selected pool’s contract and terms, confirm the correct chain and token, and check any current withdrawal conditions in the app.
Which assets and networks does MortgageFi support?
MortgageFi currently highlights Bitcoin and Ethereum-backed markets, but the exact live options depend on the pool. The homepage shows a cbBTC–USDC mortgage pool on Base and a WETH–USDC pool on Ethereum mainnet; it describes tokenized gold and other real-world assets as planned or future expansion rather than live markets. Do not treat roadmap assets as available for borrowing or lending today. The project’s network information is not entirely consistent: market examples show Base and Ethereum, while other protocol data also associates MortgageFi with Arbitrum. Check the app’s active pool and chain before sending funds. cbBTC is a token that represents Bitcoin on another network, and WETH is an Ethereum-compatible representation of ether; both introduce token and smart-contract risks in addition to the lending risks. MortgageFi does not publish a native token.
Before you deposit: a quick checklist
- Check the live pool’s network and token contract before depositing; the site shows Base and Ethereum pools, while other network data also mentions Arbitrum.
- Read the mortgage rate, down payment, payment rules and early repayment fee before accepting a loan.
- Review the smart-contract audit reports and missed-payment resolution terms; MortgageFi does not publish audit names or reports in the information reviewed.
- Check the pool’s withdrawal rules and liquidity before supplying funds; do not assume deposits can be withdrawn immediately.
4 steps
How to get started with MortgageFi
- 1
Use the official MortgageFi app and connect a wallet on the network shown for the pool you intend to use.
- 2
Verify the pool’s token contracts and check whether the asset and market are live, not merely on the roadmap.
- 3
Read the full loan or pool terms, including interest, down payment, repayment rules, withdrawal conditions and early repayment fees.
- 4
Start only with an amount you can afford to risk, and keep enough of the network’s native asset for transaction gas.
Plain English
Jargon explained
- Pool
- A shared contract where lenders deposit funds that borrowers can draw against.
- Under-collateralized
- A loan where the borrower’s deposit is worth less than the position they take.
- Early Repayment Fee
- The fee a borrower may pay for closing a loan before its agreed end date.
- Gas
- A blockchain transaction fee paid to network validators, separate from a protocol charge.
Quick answers about MortgageFi
Can you mortgage tokenized gold or real estate on MortgageFi?
No. MortgageFi says its current product supports Bitcoin and Ethereum, while tokenized gold and other real-world assets are described as planned or future expansion.
Is MortgageFi’s peer-to-peer matching engine live?
No. MortgageFi says the peer-to-peer matching engine is upcoming; its shared-pool lending model is the feature described as available now.
Does MortgageFi have a token?
No native MortgageFi token is identified in the project information. Supplying liquidity means depositing assets into a pool, not buying a MortgageFi token.
Compare
MortgageFi alternatives
Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.
Dolomite is a multi-chain DeFi lending protocol with borrowing and yield tools; it merits a look, but carries contract and liquidation risks.
SparkLend is an on-chain lending protocol with governance-set rates; it merits a look, but check market risks and withdrawal liquidity first.
Gearbox is an on-chain lending and credit protocol; it is worth researching, but check each market’s fees, risks and restrictions.
Same category
More Lending dApps
Aave is a non-custodial crypto lending protocol with a long track record, but variable rates, smart-contract and liquidation risks matter.
Aave V2 is a non-custodial crypto lending protocol with audited code, but older-version and smart-contract risks warrant care.
NAVI Lending is a Sui crypto lending protocol with variable rates, audit claims and the usual smart-contract and liquidation risks.
Morpho is onchain lending infrastructure for crypto markets and vaults; it is worth a look if you understand the contract and liquidity risks.
Kamino Finance is a Solana lending and liquidity protocol; it may suit DeFi users, but check market risks and audit details first.
Compound is an Ethereum crypto lending protocol with variable rates; it is worth researching, but contract and liquidation risks matter.
Same chain
More on Base
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.
Harvest Finance is a DeFi yield comparison index; useful for research, but each underlying strategy needs separate risk checks.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.