Is Loopscale Safe After Its 2025 Solana Exploit?
Loopscale is a Solana lending protocol that matches borrowers and lenders through on-chain order-book markets. It suffered a major exploit in 2025, so check current operations and market risks before using it.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Loopscale may suit experienced Solana users who want fixed-term lending markets and understand on-chain credit risk. Its order-book approach makes loan rates and terms explicit, but a major 2025 exploit and unclear current service status are serious cautions. Check that the market and withdrawals you need are operating, and verify the terms and fees before connecting a wallet or depositing.
Our verdict:Use with caution4.8/10
HelpfulCoin report card
Use with caution4.8/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- F (3.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- D (5.0 out of 10)
- ReputationHow established and openly run it is.
- D (5.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Loopscale at a glance
- What it is
- On-chain lending protocol
- Chain
- Solana
- Model
- Order-book credit markets
- Token
- None reported
- Incident
- About $5.8m exploit reported in 2025
- Fees
- Full schedule not published
- Licence
- No licence reported
- Last checked
Green flags and red flags
Reassuring
- Matched loans specify a rate and term, making those loan terms more explicit than a floating-rate pool.
- Loopscale’s on-chain model lets users inspect transactions on Solana.
Be careful about
- Attackers exploited Loopscale’s collateral-pricing system in 2025, draining about $5.8 million.
- Lending was temporarily halted, and later reports of partial restoration do not establish that every feature is operating.
- Loopscale does not publish a complete fee schedule, withdrawal limits or KYC policy.
- No licence or audit record is reported.
What is Loopscale and what can you do with it?
Loopscale is a Solana lending protocol that matches borrowers and lenders through on-chain order-book markets. Instead of relying only on a shared pool with rates that move as demand changes, lenders can offer funds at a stated rate and term, and borrowers can accept an offer. That can give both sides more certainty about interest and duration than a variable-rate loan. Loopscale is designed for lending and borrowing crypto assets; it has no project token in the supplied classification. Its main appeal is this fixed-term, order-book approach. Its main drawback is that funds still depend on smart contracts, market liquidity and the borrower meeting the loan terms. The protocol suffered a significant exploit in 2025, so its operating status and security history deserve particular attention.
Is Loopscale safe to lend on after its 2025 exploit?
Loopscale carries substantial smart-contract risk because attackers exploited its collateral-pricing system in April 2025. Reports put the amount drained from its USDC and SOL vaults at about $5.8 million. Loopscale temporarily halted lending after the incident; a later report described some lending functionality returning, but that does not establish that every market or service is fully restored. A report also said the attacker agreed to return funds for a bounty, which is not the same as proof that all affected users were reimbursed. Loopscale is an on-chain Solana protocol, so deposits are controlled by program code while they are committed to a market or vault. Loopscale does not publish an audit record, and no licence is reported. Do not treat the order-book model as protection from contract or oracle failures.
Is Loopscale legit, and who runs it?
Loopscale is a real Solana lending project, but its public track record includes a serious exploit and the team’s current operating details are not fully clear. One project account traces its roots to Bridgesplit in 2021 and names Luke Truitt among the people associated with its development; it also reports early funding from crypto investors. Those details are not enough to establish the current team’s full responsibilities or the quality of its security controls. The 2025 incident is a concrete negative, even though reports later described a negotiated return of funds and partial restoration of lending. Loopscale does not publish a licence, and no independent audit information is established from public sources used in this review. Treat it as an identifiable but higher-risk DeFi protocol, not as a regulated bank or a guaranteed-yield service.
What fees and interest rates does Loopscale charge?
Loopscale’s complete fee schedule is not published, so you should not assume that borrowing or lending is free. In an order-book market, a borrower’s interest rate and term are agreed through the offer they accept; the lender’s return depends on the matched loan and whether it is repaid. Solana network transaction fees also apply when you make on-chain transactions, and those fees can change with network conditions. Ask Loopscale to disclose any protocol, vault-management or withdrawal charges before committing funds, and inspect the specific market’s terms in the app. A displayed yield is not a guaranteed return: it can be affected by loan repayment, the collateral’s value, and the protocol’s ability to operate securely. If total charges are not visible before you sign, do not proceed.
How does Loopscale work, and how do you start lending?
Loopscale’s order-book model lets lenders offer funds at specified interest rates and terms; borrowers can take offers that suit their needs. Once matched, the rate and duration are generally fixed for that loan, unlike a floating rate that changes with pool demand. To get started, a user would connect a Solana wallet, choose a market and review the asset, collateral, rate, term and transaction details before signing. Lending or borrowing requires on-chain transactions, so wallet approval is not just a website sign-in: it authorizes actions using the connected account. Use a separate wallet with only the funds needed, verify the app’s identity independently and read the transaction prompts. Because of the 2025 exploit and reported partial restoration, first check which features are operating and whether the exact market you want is available.
How do Loopscale deposits and withdrawals work?
Loopscale does not publish withdrawal limits, processing times or a complete KYC policy. Because lending is matched for a stated term, funds committed to an active loan may not be immediately available to withdraw; access can depend on repayment, market liquidity and the product’s rules. A vault may have additional withdrawal conditions. Check those terms before depositing rather than assuming you can exit on demand. Deposits and withdrawals use a Solana wallet, and you will need SOL for network transaction fees. The protocol’s 2025 exploit and subsequent reported service interruption make it especially important to check the current status of withdrawals and affected markets before adding funds. If you cannot verify how to exit a position, do not deposit money you may need soon.
What makes Loopscale’s fixed-rate lending different?
The main distinction is that Loopscale uses order-book credit markets where lenders and borrowers can agree on a rate and term, rather than relying solely on a pooled market’s variable rate. This can make loan costs and lender returns easier to understand once a match is made, but it does not remove default, collateral, liquidity or software risk. Loopscale also describes its lending as modular, with separate markets for different assets and terms. Some third-party coverage describes markets as risk-isolated, but that should not be read as a guarantee that a failure in one component can never affect another. Before choosing a market, check exactly what collateral secures the loan, how its value is determined, what happens if collateral falls, and whether you can withdraw before maturity. These details matter more than a headline yield.
Before you deposit: a quick checklist
- Check whether the specific Loopscale market and withdrawal functions are operating after the 2025 incident.
- Read the loan term, collateral rules, liquidation process and early-withdrawal conditions before signing.
- Confirm all protocol, vault and transaction fees; Loopscale’s full fee schedule is not published.
- Use a Solana wallet you control, verify each transaction and keep only the amount you can afford to risk.
5 steps
How to get started with Loopscale
- 1
Verify Loopscale’s current operating status and that the specific market you plan to use is active.
- 2
Review the market’s loan term, collateral, liquidation rules, withdrawal conditions and all disclosed fees.
- 3
Connect a Solana wallet you control, keeping only the funds intended for the transaction in it.
- 4
Read each transaction prompt carefully, then start with an amount you can afford to lose.
- 5
Confirm that your position has closed and funds are available before relying on a withdrawal.
Plain English
Jargon explained
- Order book
- A market where lenders post offers and borrowers accept them, rather than relying only on a shared lending pool.
- Collateral
- Assets pledged to secure a loan, which may be sold if the borrower fails to meet the loan terms.
- Smart contract
- A software program on a blockchain that carries out agreed actions, but can contain exploitable bugs.
Quick answers about Loopscale
Does Loopscale have a token?
No project token is reported in the classification for Loopscale. Do not rely on a possible token or airdrop as a reason to lend.
Which blockchain does Loopscale use?
Loopscale is on Solana. You need a compatible Solana wallet and SOL to pay network transaction fees.
Are Loopscale lending returns guaranteed?
No. Lending and borrowing involve smart-contract, collateral, repayment and liquidity risks, and returns are not guaranteed.
Compare
Loopscale alternatives
Save is a lending protocol on Solana and Eclipse; it offers crypto lending and borrowing, but carries smart-contract and collateral risks.
Kamino Lend is a Solana crypto lending protocol; it may suit informed users, but smart-contract and liquidation risks warrant caution.
Jupiter Lend is an active Solana lending and borrowing service, but its unlisted audit and unpublished fees warrant caution.
Project 0 is a Solana lending app with portfolio-backed borrowing; its live markets are worth a look, but key safety and fee details need checking.
Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Same category
More Lending dApps
Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.
Aave is a non-custodial crypto lending protocol with a long track record, but variable rates, smart-contract and liquidation risks matter.
Aave V2 is a non-custodial crypto lending protocol with audited code, but older-version and smart-contract risks warrant care.
NAVI Lending is a Sui crypto lending protocol with variable rates, audit claims and the usual smart-contract and liquidation risks.
Morpho is onchain lending infrastructure for crypto markets and vaults; it is worth a look if you understand the contract and liquidity risks.
Kamino Finance is a Solana lending and liquidity protocol; it may suit DeFi users, but check market risks and audit details first.
Same chain
More on Solana
Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.
Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.
Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.
Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.
Laine SOL offers native and liquid Solana staking, with a stated 0% pool fee but added risks for laineSOL holders.
Quicknode is a blockchain infrastructure platform for developers, worth considering for RPC and data tools but with pricing and audit details to check.
Where the answers come from
Sources
- madeonsol.com/tools/loopscale(opens in a new tab)
- coincodecap.com/loopscale-review(opens in a new tab)
- uwuu.ai/blog/loopscale-solana(opens in a new tab)
Last checked . Something wrong or out of date? Let us know and we will fix it.