Skip to content
HelpfulCoin

Is Incprinter Safe? What to Know Before Using It

Incprinter is a PulseChain borrowing protocol that uses INC as collateral to mint INCD, with PRINT as its staking token. Its audit, fees, operators, and detailed user rules are not published in the project description.

Researched and written by the HelpfulCoin teamChecked 9 questions answered

The short answer

Incprinter may be relevant to experienced PulseChain users who want to borrow INCD against INC, but its limited published detail makes it hard to assess the risk. No audit is listed, and fees, liquidation rules, operators, and withdrawal limits are not described. Verify the deployed contracts and rules before connecting a wallet, and avoid depositing funds you cannot afford to lose.

Our verdict:Avoid4.2/10

HelpfulCoin report card

Avoid

4.2/ 10 overall

Serious problems, or it no longer works.

SafetyHow funds are held, audits, licence, incidents.
F (3.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
– (not graded)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
D (4.0 out of 10)
ReputationHow established and openly run it is.
F (3.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Incprinter at a glance

What it is
PulseChain collateralized borrowing protocol
Collateral
INC
Borrowed asset
INCD stablecoin
Staking token
PRINT
Audit
No audit listed
Fees
Not published
Chains
Pulse
Value locked
$275K−12.2% 7d
Last checked

Green flags and red flags

Reassuring

  • Incprinter clearly identifies INC as collateral, INCD as the minted stablecoin, and PRINT as the staking token.
  • Its project description identifies PulseChain and says Incprinter is based on Liquity V1.

Be careful about

  • No audit is listed for Incprinter’s contracts.
  • The project description does not name its operators or explain administrator controls.
  • Borrowing fees, liquidation terms, and withdrawal limits are not published in the project description.

What is Incprinter and what can you do with it?

Incprinter is a PulseChain borrowing protocol that lets users deposit INC as collateral to mint INCD, its stablecoin. It is described as a fork of Liquity V1, with PRINT used as a staking token. In a collateralized debt protocol, a user borrows against crypto they lock in a smart contract; the debt and collateral are managed on-chain. This may suit someone who already uses PulseChain and understands collateral and liquidation risk. Incprinter is not a general-purpose wallet or a fiat on-ramp. Its published description does not explain the full borrowing process, supported wallet interface, or what PRINT staking pays. Treat those details as unverified until you can check the protocol’s own contract and documentation.

Is Incprinter safe to use?

Incprinter carries material smart-contract and collateral risks, and its safety is not demonstrated about its audits or controls. Depositing INC means placing assets into protocol contracts; a bug, exploit, or liquidation could result in losses. No audit is listed for Incprinter, and the project’s published description does not explain contract safeguards, administrator powers, or an incident record. A Liquity V1 fork inherits a design pattern, not an assurance that the fork’s code is safe. PulseChain and the INC and INCD tokens bring their own market and liquidity risks as well. Consider the protocol unaudited unless Incprinter publishes a relevant audit, and do not deposit money you cannot afford to lose.

Is Incprinter legit, and who runs it?

Incprinter’s project description identifies what it does, but does not provide enough information to establish who operates it or assess its track record. It describes the service as a Liquity V1 fork on PulseChain and names INC, INCD, and PRINT in their respective roles. No team members, company details, licence, or project launch date are given. Incprinter has been tracked since July 31, 2025, but that is not proof of when it launched or how long it has operated. There is also no audit listed. That limited transparency does not by itself prove misconduct, but it makes independent verification important. Before using it, check that the contract addresses and token details match official Incprinter channels and review any published code, audit, and governance information.

What fees does Incprinter charge?

Incprinter does not publish enough fee information to calculate the cost of borrowing or staking. A Liquity-style protocol may charge borrowing fees and impose a minimum collateral ratio or liquidation penalty, but users should not assume Incprinter uses any particular rates or terms without checking its contracts and current interface. You may also pay PulseChain network fees for transactions, and the market price of INC, INCD, or PRINT can affect the real cost and value of a position. The project’s short description does not state borrowing rates, redemption fees, staking rewards, or any withdrawal charge. Check the transaction details before signing, and avoid relying on an estimated cost that does not include network fees or potential liquidation losses.

How does Incprinter work, and how do you get started?

The basic model is to lock INC as collateral and mint INCD, but Incprinter does not publish enough operating detail to give a verified, click-by-click guide. In collateralized borrowing, the value of the locked collateral must support the debt; if collateral falls too far relative to the loan, it can be liquidated. To investigate Incprinter safely, first verify its official PulseChain contract addresses and read any documentation on collateral ratios, liquidation, repayments, and redemptions. Then use a wallet that supports PulseChain and check the network and transaction details before approving anything. Do not assume that a Liquity V1 fork has identical rules to Liquity. PRINT is described as the staking token, but the project does not explain staking conditions or rewards in its published description.

How do Incprinter deposits, withdrawals, and KYC work?

Incprinter’s deposit and withdrawal limits, timing, and KYC policy are not published in its project description. The stated collateral is INC on PulseChain, so using the protocol would involve compatible on-chain assets and a wallet rather than a documented bank deposit route. A typical smart-contract protocol requires you to approve and send a transaction to lock collateral; withdrawing collateral generally depends on repaying debt and meeting the contract’s rules. Those are general mechanics, not confirmation of Incprinter’s exact process. No fiat deposit or cash-out method is described. Before moving funds, verify the contract and token addresses, check whether the interface gives a clear repayment and withdrawal route, and confirm the network fee. Do not assume withdrawals are instant or unrestricted.

Before you deposit: a quick checklist

  • Verify Incprinter’s contract and token addresses independently before approving a transaction.
  • Look for an audit that covers the deployed PulseChain contracts; no audit is listed.
  • Check collateral ratios, liquidation rules, and repayment requirements before minting INCD.
  • Confirm the current network fee and the exact amount and contract shown in your wallet.

4 steps

How to get started with Incprinter

  1. 1

    Find Incprinter’s official contract addresses and verify them independently before using a wallet.

  2. 2

    Read the deployed contract details and look for an audit covering those exact contracts.

  3. 3

    Check the current collateral, repayment, liquidation, and withdrawal rules before depositing INC.

  4. 4

    Review each wallet transaction and network fee before signing; start only with an amount you can afford to lose.

Plain English

Jargon explained

Collateral
Crypto locked in a protocol to support a loan or minted asset.
CDP
A loan that can be liquidated if its collateral no longer meets the protocol’s rules.
Liquidation
A smart-contract process that sells or removes collateral when a position falls below required conditions.

Quick answers about Incprinter

Is INCD guaranteed to stay worth one dollar?

INCD is described as Incprinter’s stablecoin, minted against INC collateral. Its peg, redemption arrangements, and market liquidity are not explained in the project description, so do not assume it will always trade at a fixed value.

What is the PRINT token used for?

PRINT is described as Incprinter’s staking token. The project does not publish staking rewards, lock-up terms, or withdrawal conditions in its description, so check the contract and current interface before staking.

Can you use Incprinter with a bank card?

No. Incprinter’s described collateral and borrowing activity is on PulseChain, and no fiat deposit or cash-out service is described. You would need to account for the cost and risks of acquiring and transferring supported crypto separately.

Compare

Incprinter alternatives

All alternatives
Sky Lending logoScore 5.6 out of 10

Sky Lending is an Ethereum DeFi borrowing and savings ecosystem; check its fees, collateral rules and audit details before using it.

TVL $3.74B−8.3%Ethereum
Liquity V1 logoScore 6.5 out of 10

Liquity V1 lets you borrow LUSD against ETH without ongoing interest, but fees, liquidation risk and independent frontends call for care.

TVL $130M−13.6%Ethereum
LiquidLoans logoScore 5.5 out of 10

Liquid Loans lets users borrow USDL against ETH or PLS, but liquidation and contract risks make it a cautious-use proposition.

TVL $1.67MPulse · Base
Liquity V2 logoScore 6.1 out of 10

Liquity V2 lets you borrow BOLD against ETH or staked ETH at a rate you choose, but independent frontends and liquidation risk require care.

TVL $70.7M−16.1%Ethereum
Indigo logo

Indigo

CDPs

Score 5.5 out of 10

Indigo is a Cardano protocol for creating synthetic assets; its non-custodial design comes with liquidation and price-peg risks.

TVL $2.31M−22.9%Cardano
crvUSD logo

crvUSD

CDPs

Score 5.6 out of 10

crvUSD is Curve’s Ethereum stablecoin, backed by crypto collateral; useful for experienced borrowers, but exposed to liquidation and depeg risk.

TVL $73.6M−30.4%Ethereum

Same category

More CDPs

CDPs rankings
Makerdao logoScore 6.8 out of 10

Maker Governance is a proposal and voting portal for Maker/Sky; it is useful to follow, but check whether an action uses MKR or SKY.

Ethereum
Parallel Protocol V3 logoScore 5.9 out of 10

Parallel Protocol V3 mints USDp and offers sUSDp savings; it merits a cautious look because collateral, contract and yield risks remain.

TVL $852K+0.0%Hyperliquid L1 · Base · Ethereum +2
Frankencoin logoScore 5.8 out of 10

Frankencoin is a collateral-backed Swiss-franc stablecoin protocol worth a look with caution: ZCHF is not insured cash.

TVL $48.5M−19.1%Ethereum
Score 5.8 out of 10

Liquity is an Ethereum protocol for borrowing BOLD against ETH; its user-set rates offer flexibility, but loans and third-party frontends carry risk.

Ethereum
Thala CDP logoScore 5.7 out of 10

Thala is an Aptos DeFi protocol for Move Dollar borrowing and trading; its audits are a positive sign, but key loan terms need checking.

TVL $415K−3.8%Aptos
Inverse Finance Frontier logoScore 5.6 out of 10

Inverse Finance is an Ethereum borrowing and yield protocol worth researching, but its smart-contract, liquidation and stablecoin risks call for caution.

TVL $4.30M−13.3%Ethereum

Same chain

More on Pulse

Pulse rankings
Team Finance logo

Team Finance

Token Locker

Score 5.8 out of 10

Team Finance is a multi-chain token-management toolkit; its non-custodial locks may be useful, but audit and fee details need checking.

TVL $47.8M−13.5%Ethereum · BNB Chain · Base +18
vfat.io logo

vfat.io

Yield Aggregator

Score 5.8 out of 10

vfat.io is a multi-chain yield and portfolio tool with self-custody claims; review its contracts, costs, and strategy risks before using it.

TVL $24.8M−19.2%Base · Ethereum · Hyperliquid L1 +33
DxSale logo

DxSale

Presale

Score 5.4 out of 10

DxSale, now DX App, offers multichain presales and token tools, but unclear fees, team details and audit scope call for caution.

TVL $15.3M−12.6%BNB Chain · Ethereum · Base +16
Bazooka logo

Bazooka

Analytics

Score 5.4 out of 10

Bazooka is a multi-chain coin discovery site; useful for research, but rankings and paid promotions are not proof a token is safe.

Solana · BNB Chain · Ethereum +31
Cryptobuilder logo

Cryptobuilder

Developer Tools

Score 5.4 out of 10

CryptoBuilder is a no-code ERC-20 token creator for EVM chains; it is convenient, but its fees and security credentials need closer scrutiny.

Ethereum · BNB Chain · Polygon +21
POWERCITY Earn Protocol logoScore 5.2 out of 10

POWERCITY Earn Protocol lets PulseChain users borrow PXDC against PLSX; its interest-free loans come with collateral and peg risks.

TVL $854K−21.8%Pulse

Where the answers come from

Sources

  1. defillama.com/protocol/incprinter(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.