Hyperstable Review: Is It Safe to Borrow?
Hyperstable is a HyperEVM borrowing and lending protocol that uses crypto collateral and offers a dollar-pegged stablecoin. Its audits and market rates need closer checking, and key details about its team, fees and tokens are unclear.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Hyperstable may suit experienced HyperEVM users who understand collateralized loans and can tolerate smart-contract and liquidation risk. It offers borrowing, lending and liquidity features, and two audits are listed, but their scope is unclear. The team, licence, full fee schedule and the relationship between USH and PEG are not explained clearly. Check the market rules and token contracts before connecting a wallet or depositing funds.
Our verdict:Use with caution5.1/10
HelpfulCoin report card
Use with caution5.1/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (4.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- D (5.0 out of 10)
- ReputationHow established and openly run it is.
- D (4.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Hyperstable CDP at a glance
- What it is
- Crypto-backed borrowing and lending protocol
- Network
- HyperEVM (Hyperliquid ecosystem)
- Tokens
- USH in app; PEG also associated
- Audits
- Two listed; scope and findings unclear
- Tracked since
- 2025-05-16
- Licence
- Not published
- Token
- PEG
- Value locked
- $123K−10.7% 7d
- Last checked
Green flags and red flags
Reassuring
- Hyperstable describes its stablecoin borrowing model as crypto-backed and over-collateralized.
- The app links to project documentation and community channels.
- Two audits are listed, although their scope and findings need checking.
Be careful about
- The project does not publish a named team, licence or detailed incident record.
- The two audit reports, their scope and their findings need independent checking.
- The relationship between the app’s USH stablecoin and the PEG token is unclear.
What is Hyperstable CDP and what can you do with it?
Hyperstable is a decentralized borrowing and lending app on HyperEVM, part of the Hyperliquid ecosystem. It uses crypto collateral to let users borrow a dollar-pegged stablecoin; the app calls that borrowed asset USH. Users can also access lending and liquidity pools, stake assets and participate in voting or rewards features. This is a DeFi protocol, not a bank account or a service that promises a fixed return. The app’s dashboard shows borrowing, lending, liquidity, liquidation and reward sections, but available markets and rates can change. There is a naming detail to check before using it: the project’s associated token is identified as PEG, while the app’s borrowing interface refers to USH. The specific relationship between PEG and USH is not clear from the project details described here. Read the current documentation and transaction details before depositing funds or approving a token.
Is Hyperstable safe to use?
Hyperstable has some positive safety signals, but there is not enough information to treat it as low risk. The protocol is described as over-collateralized, meaning borrowers are expected to deposit more value than they borrow. That design can reduce the risk of unpaid debt, but it cannot eliminate losses from sharp price moves, faulty code, oracle problems or liquidations. Two audits are listed for the project, but the audit firms, dates, scope and findings are not specified in the project details described here. Those details matter: an audit is not a guarantee, and an old or narrow audit may not cover the current contracts. Hyperstable’s custody model is typical of DeFi: assets are managed by smart contracts rather than held in a conventional bank account. No licence, named security incident history or insurance cover is published. Treat deposits as money you can afford to lose, and review the audit reports and contract addresses before connecting a wallet.
Is Hyperstable CDP legit?
Hyperstable is an identifiable, active DeFi protocol, but its public track record is difficult to assess. It has a working app with borrowing, lending, liquidity, voting and rewards sections, and its documentation and community channels are linked from the app. The protocol is associated with HyperEVM and the Hyperliquid ecosystem. It has been tracked since May 2025, which is a relatively short public history for a financial protocol. The project does not publish a named team, company operator, licence or detailed incident record in the project details described here. Two audits are listed, but without their reports or scope it is not possible to judge how much assurance they provide. These gaps do not prove that Hyperstable is fraudulent; they do mean users have less independent information with which to assess accountability and security. Before using it, check whether the team, contracts and audit reports are clearly identified in the current project documentation.
What does it cost to borrow or earn with Hyperstable?
Hyperstable does not publish a complete fee schedule in the project details described here. Its app displays borrowing and lending rates, including a 0.02% lowest rate for isolated borrowing and a 0.03% highest APR for lending, but these are interface figures that may change and should not be treated as guaranteed rates. The core borrowing rate appears as an unavailable or changing value. Check the live market before committing funds, and confirm whether the displayed rate is an APR and which market it applies to. You will also pay HyperEVM network gas fees for transactions such as supplying collateral, borrowing, repaying and withdrawing. Swaps or liquidity-pool activity may have additional pool fees or price impact, but Hyperstable’s fee details for those actions are not published in the information described here. Consider both the cost of borrowing and the risk that collateral can be liquidated; a low displayed rate does not make a leveraged position safe.
How do you use Hyperstable to borrow or earn?
To use Hyperstable, connect a compatible wallet that supports HyperEVM, then check the selected market and the token addresses before making a deposit. The app separates core borrowing from isolated markets, so confirm which market you are entering and what collateral it accepts. Deposit collateral, review the borrowing rate, health factor and liquidation price, then borrow only after understanding how much collateral could be sold if its value falls. A health factor is a measure of how close a loan is to liquidation; the app displays it alongside the position. For lending or liquidity rewards, deposit into the relevant pool and follow the app’s staking steps if required. The interface includes reward and voting sections, but rates and reward availability can change. Hyperstable’s collateral list, minimum deposits and complete market rules are not specified in the project details described here. Read the current market documentation, check each wallet approval, and start with a small transaction if you decide to proceed.
How do Hyperstable deposits and withdrawals work?
Hyperstable’s app supports on-chain deposits and withdrawals through its borrowing, lending and liquidity functions, rather than a conventional bank deposit or cash-out service. For a loan, you generally repay the borrowed stablecoin and then withdraw eligible collateral, subject to the market’s rules and the position’s health. Pool deposits are normally withdrawn through the relevant pool interface, but liquidity conditions or contract rules can affect when and how much can be removed. The project does not publish deposit or withdrawal limits, processing times, or a fiat off-ramp in the project details described here. You will need the appropriate HyperEVM assets to pay network gas fees. KYC requirements are not published; do not assume that this means no checks can apply. Before depositing, confirm that you can obtain the required tokens, repay any debt and access the correct network. Read the withdrawal and liquidation rules for the specific market, and do not rely on being able to exit at a particular price or time.
What is the difference between Hyperstable’s PEG and USH?
The app uses the name USH for the stablecoin borrowers receive, while PEG is identified as Hyperstable’s associated token. Those names should not be treated as interchangeable: the project details described here do not explain whether PEG is a governance, reward or other token, or exactly how it relates to USH. A dollar peg is a design goal, not a guarantee that a token will always trade for one dollar. Before borrowing, swapping or providing liquidity, verify the exact token contract and market in the app’s official documentation. Also check the token’s liquidity and redemption rules; a stablecoin may trade below its target if market demand, collateral backing or liquidity weakens. Avoid sending tokens to an address based only on a ticker symbol, since different tokens can share similar names. If the app or documentation does not clearly explain the role of PEG and USH, wait until you can verify those details rather than guessing.
Before you deposit: a quick checklist
- Verify the HyperEVM network and the official contract addresses for USH, PEG and the collateral token.
- Read the two audit reports, including their dates, scope and unresolved findings.
- Check the live market’s borrowing rate, collateral rules, liquidation threshold and withdrawal conditions.
- Confirm you can repay the loan and cover HyperEVM gas fees before depositing.
4 steps
How to get started with Hyperstable CDP
- 1
Open Hyperstable’s official app and confirm that the wallet is connected to HyperEVM.
- 2
Read the current documentation and verify the token and contract addresses for the market you plan to use.
- 3
Review the market’s collateral, borrowing rate, liquidation rules and withdrawal conditions.
- 4
Check the audit reports and make sure you can cover repayment and network gas before depositing.
Plain English
Jargon explained
- CDP
- A loan backed by crypto deposited in a smart contract.
- Health factor
- A measure of how close a loan is to liquidation.
- APR
- The annualized rate charged on a loan or earned by a lender.
Quick answers about Hyperstable CDP
What does CDP mean in Hyperstable?
A CDP, or collateralized debt position, is a loan backed by crypto assets deposited in a smart contract. If the collateral value falls too far, the protocol may liquidate it to cover the debt.
Can Hyperstable send money to my bank account?
The app provides a swap feature, but Hyperstable does not publish fiat cash-out support in the project details described here. A swap is not the same as withdrawing money to a bank account.
Which network does Hyperstable use?
Hyperstable is identified with HyperEVM, part of the Hyperliquid ecosystem. Check the network selection and token contract before sending assets; a transfer on the wrong network may be difficult or impossible to recover.
Compare
Hyperstable CDP alternatives
Reservoir Protocol is a DeFi stablecoin and yield system worth researching, but key safety and withdrawal terms need checking first.
Sky Lending is an Ethereum DeFi borrowing and savings ecosystem; check its fees, collateral rules and audit details before using it.
Liquity V1 lets you borrow LUSD against ETH without ongoing interest, but fees, liquidation risk and independent frontends call for care.
Parallel Protocol V3 mints USDp and offers sUSDp savings; it merits a cautious look because collateral, contract and yield risks remain.
Liquity V2 lets you borrow BOLD against ETH or staked ETH at a rate you choose, but independent frontends and liquidation risk require care.
Indigo is a Cardano protocol for creating synthetic assets; its non-custodial design comes with liquidation and price-peg risks.
Same category
More CDPs
Maker Governance is a proposal and voting portal for Maker/Sky; it is useful to follow, but check whether an action uses MKR or SKY.
Frankencoin is a collateral-backed Swiss-franc stablecoin protocol worth a look with caution: ZCHF is not insured cash.
Liquity is an Ethereum protocol for borrowing BOLD against ETH; its user-set rates offer flexibility, but loans and third-party frontends carry risk.
Thala is an Aptos DeFi protocol for Move Dollar borrowing and trading; its audits are a positive sign, but key loan terms need checking.
crvUSD is Curve’s Ethereum stablecoin, backed by crypto collateral; useful for experienced borrowers, but exposed to liquidation and depeg risk.
Inverse Finance is an Ethereum borrowing and yield protocol worth researching, but its smart-contract, liquidation and stablecoin risks call for caution.
Same chain
More on Hyperliquid L1
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.
Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.
Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.
Sablier Flow streams crypto payments over time; it is worth considering with care around contract risk and withdrawal fees.
Phantom is a self-custody crypto wallet with trading features; it is not presented as a separate blockchain and has notable disclosure gaps.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.