Hatom Lending Review: Is It Safe and Legit?
Hatom Lending is a MultiversX DeFi app for supplying crypto to lending pools and borrowing against collateral. Its app names several audit firms, but rates, withdrawal terms and operator details need careful checking.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Hatom Lending may suit MultiversX users who understand variable-rate DeFi lending and can manage collateral risk. Its app names several audit firms and provides lending-market tools, but audits are not guarantees, and the app text does not clarify operator identity, licensing, fixed fees or withdrawal limits. Review the specific market’s live terms and security reports before depositing, and do not borrow more than you can safely repay.
Our verdict:Use with caution5.5/10
HelpfulCoin report card
Use with caution5.5/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- C (5.5 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- C (5.5 out of 10)
- ReputationHow established and openly run it is.
- C (5.5 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Hatom Lending at a glance
- Category
- Lending
- Product
- Decentralized lending and borrowing
- Chain
- MultiversX
- Token
- HTM
- Audits
- Several firms named in Security Reports
- Status
- Active
- Tracked since
- 2023-07-19
- Value locked
- $5.92M−9.0% 7d
- Last checked
Green flags and red flags
Reassuring
- Hatom’s app provides a Security Reports section with multiple named audit firms.
- The app displays market, balance and borrowing-limit sections for users to review.
- Hatom Lending operates on MultiversX and has been tracked since 2023.
Be careful about
- Audit names do not guarantee that every current contract or market is covered.
- Hatom does not show fixed rates, fees or withdrawal limits in the app text.
- The app text does not identify a licensed operator or regulatory protections.
- Borrowers risk liquidation if collateral no longer meets market requirements.
What is Hatom Lending and what can you do with it?
Hatom Lending is a decentralized app for supplying crypto to lending markets and borrowing against crypto on MultiversX. Suppliers deposit supported assets into a pool and may earn a variable yield; borrowers use supplied assets as liquidity and must generally provide collateral. The app shows separate lending and USH pools, plus balances, borrow limits and market liquidity. Hatom also describes USH as an over-collateralized stablecoin pegged to the US dollar. This is a DeFi protocol, not a bank account: deposits interact with smart contracts, and rates and available liquidity can change. The app’s market details should be checked before choosing an asset, since supported assets, current yields and borrowing terms are not specified in its general interface text.
Is Hatom Lending safe to use?
Hatom’s app has a Security Reports section showing smart-contract audit work for its lending protocol, with firms including Runtime Verification, PeckShield, CertiK, Hacken and Halborn among those named. Audits can identify issues in the code at the time and scope reviewed, but they do not guarantee that funds are safe or that every component was covered. Hatom Lending operates on MultiversX, so users also face smart-contract, market and blockchain risks. The app text does not establish a regulatory licence, insurance, custody protections or a complete incident history. Treat a wallet connection and a deposit as permission to interact with contracts—not as a protected deposit. Before supplying funds, read the audit reports for the specific lending market and verify the contract details in the official app.
Is Hatom Lending legit, and who runs it?
Hatom Lending is an active MultiversX lending protocol, and its app provides working sections for lending markets, borrowing and security reports. The protocol is also tracked as a lending project since July 2023; that date is not necessarily its launch date. These are useful signs of a functioning product, but they do not by themselves prove who legally operates it or how it is governed. The app text does not identify an operating company or named leadership team, and it does not show a regulatory licence. Hatom’s listed audits add evidence of security review, but the audit names alone cannot show whether every current contract version was examined. Regard Hatom as a real DeFi product with meaningful unanswered questions about accountability, rather than assuming it has the protections of a licensed financial institution.
What fees and interest rates does Hatom Lending charge?
Hatom does not show fixed lending or borrowing fees in the app text. In a lending market, suppliers usually receive a variable rate and borrowers pay a variable rate; both can change as pool utilization—the share of supplied assets currently borrowed—changes. MultiversX transaction fees also apply when you approve, supply, borrow, repay or withdraw. Borrowing can carry additional costs or consequences if collateral falls below required levels, so check the market’s displayed rates, collateral rules and liquidation terms before acting. The app shows net APY and market information, but no specific rate or fee should be treated as permanent. Compare the live terms in the selected pool and account for transaction fees on both entry and exit; Hatom does not publish a simple fixed-price schedule in the text shown.
How do you use Hatom Lending?
To use Hatom Lending, open its official app and connect a MultiversX-compatible wallet. Review the available lending markets and select the asset and pool you intend to use; the app separates the main pool from the USH pool. Check the current yield or borrow rate, liquidity, collateral requirements and transaction details before approving a token or submitting a transaction. Supplying crypto can make it available for borrowing, while borrowing requires collateral and leaves you responsible for repayment. Keep enough of the relevant network token in your wallet for transaction fees. Start with an amount you can afford to have exposed to smart-contract and market risk, and verify every wallet prompt: a wallet connection alone is not the same as depositing, but token approvals can authorize contract actions.
How do Hatom Lending deposits and withdrawals work?
You supply assets by connecting a MultiversX wallet and submitting the relevant market transaction; getting them back requires a withdrawal transaction from that wallet. Withdrawals depend on available pool liquidity, so a market with heavily borrowed funds may not let you withdraw the full amount immediately. Borrowed assets must be repaid before collateral can be released, subject to the protocol’s market rules. Hatom’s app text does not state withdrawal limits, processing-time guarantees or a KYC requirement. DeFi transactions are generally processed on-chain rather than as bank transfers, and network fees apply. Before depositing, check the pool’s available liquidity and transaction conditions, and avoid relying on a fixed withdrawal time unless the app gives a current estimate. Keep your wallet recovery phrase private; Hatom should not need it.
How does Hatom’s USH lending pool work?
USH is described by Hatom as an over-collateralized stablecoin pegged to the US dollar. Over-collateralized means the protocol is designed to require more value in backing assets than the stablecoins issued, but that design does not guarantee that USH will always trade at exactly one dollar or that collateral can always be liquidated successfully. Hatom’s interface distinguishes a USH pool from its main lending pool and says to switch pools to enable minting. That means USH-related actions may have different market settings from ordinary lending. Check the current collateral, minting and repayment rules, available liquidity and any displayed rates before using the USH pool. The app text does not provide enough detail to quantify those terms, so do not assume the dollar peg removes market or smart-contract risk.
Before you deposit: a quick checklist
- Check the current supply and borrow rates, pool liquidity and collateral rules for the exact MultiversX market.
- Read the security reports for the contract and version you plan to use; an audit is not a guarantee.
- Keep enough MultiversX network tokens for approval, deposit, repayment and withdrawal transactions.
- Confirm the wallet transaction’s contract and permissions before signing, and never share your recovery phrase.
5 steps
How to get started with Hatom Lending
- 1
Open Hatom’s official app and connect a MultiversX-compatible wallet; never enter a recovery phrase into a website.
- 2
Review the chosen pool’s available assets, liquidity, rates, collateral rules and audit coverage.
- 3
Keep network tokens for transaction fees and verify each approval or transaction in your wallet.
- 4
Supply or borrow only after checking how repayment, withdrawal and liquidation work for that market.
- 5
Monitor the position and keep enough collateral headroom if you borrow.
Plain English
Jargon explained
- Supply
- Crypto supplied to a market to support borrowing and potentially earn a variable yield.
- Collateral
- Assets pledged to support a loan; they can be liquidated if the position breaks protocol limits.
- Utilization
- The share of supplied assets currently borrowed, which can affect lending rates.
Quick answers about Hatom Lending
Which blockchain does Hatom Lending use?
Hatom Lending operates on MultiversX. You need a compatible wallet and the network’s transaction token for on-chain fees.
Do you need HTM to use Hatom Lending?
HTM is Hatom’s token, but the app text does not specify whether or how it is required for lending transactions. Check the current market instructions before interacting.
Is USH guaranteed to stay worth one dollar?
No. Hatom describes USH as pegged to the US dollar, but a stablecoin’s market price can move away from its target.
Compare
Hatom Lending alternatives
Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.
Dolomite is a multi-chain DeFi lending protocol with borrowing and yield tools; it merits a look, but carries contract and liquidation risks.
Save is a lending protocol on Solana and Eclipse; it offers crypto lending and borrowing, but carries smart-contract and collateral risks.
Kamino Lend is a Solana crypto lending protocol; it may suit informed users, but smart-contract and liquidation risks warrant caution.
Same category
More Lending dApps
Aave is a non-custodial crypto lending protocol with a long track record, but variable rates, smart-contract and liquidation risks matter.
Aave V2 is a non-custodial crypto lending protocol with audited code, but older-version and smart-contract risks warrant care.
NAVI Lending is a Sui crypto lending protocol with variable rates, audit claims and the usual smart-contract and liquidation risks.
Morpho is onchain lending infrastructure for crypto markets and vaults; it is worth a look if you understand the contract and liquidity risks.
Kamino Finance is a Solana lending and liquidity protocol; it may suit DeFi users, but check market risks and audit details first.
Compound is an Ethereum crypto lending protocol with variable rates; it is worth researching, but contract and liquidation risks matter.
Same chain
More on MultiversX
xAudits audits Solidity and Rust smart contracts and publishes reports, but its prices and auditor credentials are not public.
Gate is a long-running centralized exchange with extensive crypto markets, but custody and proof-of-reserves limitations merit caution.
Bitget is a centralized crypto exchange with derivatives and stock-related products; its reserve claims are useful, but verify custody and terms.
xExchange is an active MultiversX token-swapping DEX, but limited audit, fee and licensing details make careful use important.
JewelSwap is a multi-chain DeFi app for staking, farms and NFT loans; its smart-contract and leverage risks warrant caution.
Hatom Liquid Staking turns staked MultiversX EGLD into sEGLD; its audits are a plus, but key fees and exit terms need checking.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.