Skip to content
HelpfulCoin

Everything Review: Is Its DeFi Lending Safe?

Everything combines token swaps, lending, leverage and limit orders in shared pools across four networks. Its novel design and lack of a disclosed independent audit call for caution.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

Everything may suit experienced DeFi users who understand pool, collateral and smart-contract risks and want swaps and lending in one protocol. Its whitepaper explains an unusual shared-pool design, but no independent audit, detailed fee schedule or operating-team track record is disclosed. The beta interface and reliance on each pool’s own liquidity are reasons to start cautiously, not to treat its proposed safeguards as guarantees.

Our verdict:Use with caution4.8/10

HelpfulCoin report card

Use with caution

4.8/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
D (4.5 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
– (not graded)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
D (5.2 out of 10)
ReputationHow established and openly run it is.
D (4.8 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Everything at a glance

What it is
AMM combined with oracle-less lending
Networks
Arbitrum, Ethereum, BNB Chain, Base
Token
EV
Audit
No independent audit disclosed
Status
Active; beta v1 interface
Value locked
$312K+4.8% 7d
Last checked

Green flags and red flags

Reassuring

  • Everything has a technical whitepaper describing its intended mechanisms and risks.
  • The project names five whitepaper authors.
  • The design aims to keep swaps, lending and liquidations within the same pool.

Be careful about

  • An independent audit is not disclosed.
  • The combined lending and trading design is complex and relies on each pool’s own liquidity.
  • Specific protocol fees, borrowing rates and withdrawal limits are not published.
  • The interface points to a beta version.

What is Everything Protocol and what can you do with it?

Everything is a DeFi protocol that combines token swaps, lending, leverage and limit orders in one pool for a token pair. Its design lets the same pool provide trading liquidity, back loans and fill orders, rather than using separate services for each. Everything says it operates on Arbitrum, Ethereum, BNB Chain and Base. The protocol uses the EV token, though its role in borrowing, fees or governance is not described in the project details. The interface points users to a beta version, so treat it as an early-stage product rather than a mature lending market. Its design is complex, and the protocol’s technical claims should not be treated as a guarantee that deposits are safe.

Is Everything Protocol safe to use?

Everything’s design aims to keep borrowing and trading within the same pool, but that does not make it risk-free. The protocol describes its pricing and credit decisions as oracle-less: they rely on the pool’s own trades and a lagged internal price band rather than an external price feed. That avoids some oracle-related risks, but pool prices and liquidity can still behave badly, especially for volatile or thinly traded tokens. The project describes junior-first loss accounting and a liquidation system, but those are design claims, not proof that the system works under every market condition. An independent audit is not disclosed. Before depositing, check the exact contracts and token pair, and only risk funds you can afford to lose.

Is Everything Protocol legitimate, and who runs it?

Everything has a technical whitepaper that names Jean Rausis, Eric Rabl, Flavio Roth, Abdel Mecheri and Quang Chuc Nguyen as authors. That gives readers named contributors and a written explanation of the protocol’s intended mechanics. However, the details do not identify a company or operating team, explain those authors’ track records, or provide a documented incident history. An audit is not disclosed, either. The protocol is marked active and has a beta v1 interface, but those points alone do not demonstrate that its contracts are secure or that it has a long operating history. It is reasonable to regard Everything as a real, technically described project, while treating its operational credibility and security record as unproven.

What fees does Everything Protocol charge?

Everything does not publish specific swap fees, borrowing rates, withdrawal charges or other user-facing fee figures. Its design describes dynamic swap fees that respond to pool imbalance, plus a utilization surcharge; borrowing uses an interest-rate model, but the applicable rates are not given. You should also expect to pay the blockchain’s transaction fee, known as gas, when interacting with a deployed contract. Gas varies with network activity and is separate from any protocol fee. Before confirming a transaction, inspect the fee and rate shown by the interface or wallet, and check the terms for the exact pool. Without published rates, it is difficult to compare Everything’s total costs with another exchange or lending market.

How do you use Everything Protocol?

You would use Everything by connecting a compatible crypto wallet to its beta interface on a supported chain, then selecting a token-pair pool for the action you want. Depending on the pool and interface, the protocol is designed to support swaps, borrowing against the other token in a pair, leverage and limit orders. The underlying design combines an automated market maker (AMM)—a pool that prices swaps—with lending and order-book functions. It uses the pool’s own trading activity to guide pricing and credit decisions rather than an external oracle. Check the selected network, token contract addresses, collateral terms and transaction details before signing. Exact interface steps and pool availability can change, and the published details do not specify every onboarding requirement.

How do deposits and withdrawals work on Everything?

You would generally move supported tokens into a wallet on one of Everything’s supported networks and use the relevant pool to deposit or trade. The protocol’s whitepaper says exits are intended to pay tokens in full, with collective liquidity able to front some not-yet-realized yield subject to a capacity limit. That is a description of the design, not a guarantee that every withdrawal will be available immediately or under all market conditions. Everything does not publish withdrawal limits, processing times or a clear deposit minimum. KYC requirements are not disclosed; wallet-based DeFi access should not be mistaken for confirmation that no checks apply. Review the interface’s withdrawal terms and contract details before depositing, and keep funds for network gas.

How does Everything’s oracle-less lending work?

Everything’s oracle-less approach means it does not rely on an outside price feed for its described lending decisions. Instead, the design uses an internal price band that changes over time and the pool’s own pricing curve. This can reduce exposure to a manipulated or unavailable external oracle, but it also makes the pool’s own liquidity and trading behavior especially important. If a token pair has shallow liquidity or sharp price moves, the pool may not be able to absorb trades or liquidations as expected. The whitepaper explains intended safeguards, including liquidation and loss accounting, but the system has no disclosed independent audit. Consider oracle-less pricing a different risk model, not an absence of price risk.

Before you deposit: a quick checklist

  • Verify the contract address and network before approving a token or signing a transaction.
  • Check the pool’s current swap fee, borrowing rate, collateral terms and withdrawal conditions in the interface.
  • Review the exact token pair’s liquidity and volatility; Everything’s pricing relies on its own pool.
  • Remember that no independent audit is disclosed and the interface is a beta.

4 steps

How to get started with Everything

  1. 1

    Open Everything’s beta interface and confirm you are using the intended official application.

  2. 2

    Connect a wallet on a supported network, checking the network and token contract addresses.

  3. 3

    Review the selected pool’s liquidity, fees, borrowing terms and withdrawal conditions.

  4. 4

    Start with an amount you can afford to lose, and inspect each transaction before signing.

Plain English

Jargon explained

AMM
A pool that uses a mathematical formula to price token swaps.
Collateralized borrowing
A loan backed by crypto deposited as security.
Gas
The fee paid to a blockchain to process a transaction.

Quick answers about Everything

Which networks does Everything support?

Everything is described as operating on Arbitrum, Ethereum, BNB Chain and Base. Check the interface before connecting, as pool availability can differ by network.

Is Everything Protocol live?

Everything’s interface points users to a beta v1, and the project is marked active. Check the interface and contract activity before relying on a particular pool.

What is the EV token used for?

The protocol details identify EV as its token but do not explain a required use for it. Do not assume it is needed for borrowing, fees or governance without checking the current token documentation.

Compare

Everything alternatives

All alternatives
Morpho Blue logoScore 6.1 out of 10

Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.

TVL $10.1B−7.0%Ethereum · Base · Robinhood Chain +41
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.1B−9.2%Ethereum · Base · Arbitrum +18
Compound V3 logoScore 6.8 out of 10

Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.

TVL $1.08B−11.7%Ethereum · Arbitrum · Base +7
Dolomite logo

Dolomite

Lending

Score 5.8 out of 10

Dolomite is a multi-chain DeFi lending protocol with borrowing and yield tools; it merits a look, but carries contract and liquidation risks.

TVL $124M−11.2%Ethereum · Arbitrum · Berachain +4
SparkLend logo

SparkLend

Lending

Score 6.0 out of 10

SparkLend is an on-chain lending protocol with governance-set rates; it merits a look, but check market risks and withdrawal liquidity first.

TVL $4.11B−14.3%Ethereum · xDai
Gearbox logo

Gearbox

Lending

Score 6.0 out of 10

Gearbox is an on-chain lending and credit protocol; it is worth researching, but check each market’s fees, risks and restrictions.

TVL $18.9M−12.4%Ethereum · Etherlink · Monad +8

Same category

More Lending dApps

Lending rankings

Aave

Lending

Score 6.8 out of 10

Aave is a non-custodial crypto lending protocol with a long track record, but variable rates, smart-contract and liquidation risks matter.

Ethereum
Aave V2 logo

Aave V2

Lending

Score 6.7 out of 10

Aave V2 is a non-custodial crypto lending protocol with audited code, but older-version and smart-contract risks warrant care.

TVL $88.0M−9.5%Ethereum · Polygon · Avalanche
NAVI Lending logoScore 6.5 out of 10

NAVI Lending is a Sui crypto lending protocol with variable rates, audit claims and the usual smart-contract and liquidation risks.

TVL $97.2M−22.4%Sui

Morpho

Lending

Score 6.5 out of 10

Morpho is onchain lending infrastructure for crypto markets and vaults; it is worth a look if you understand the contract and liquidity risks.

Ethereum · Base
Kamino Finance logoScore 6.5 out of 10

Kamino Finance is a Solana lending and liquidity protocol; it may suit DeFi users, but check market risks and audit details first.

Solana

Compound

Lending

Score 6.2 out of 10

Compound is an Ethereum crypto lending protocol with variable rates; it is worth researching, but contract and liquidation risks matter.

Ethereum

Same chain

More on Arbitrum

Arbitrum rankings
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.29B−13.4%Ethereum · Base · Arbitrum +38
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $719M−16.7%Ethereum · Base · Polygon +14
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.05B−10.1%Ethereum · Robinhood Chain · Base +19
Bitvavo logo

Bitvavo

Centralized Exchanges

Score 6.9 out of 10

Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.

TVL $329M+7.8%Ethereum · Bitcoin · Solana +9
Harvest Finance logo

Harvest Finance

Yield Aggregator

Score 6.8 out of 10

Harvest Finance is a DeFi yield comparison index; useful for research, but each underlying strategy needs separate risk checks.

TVL $14.2M−16.9%Base · Ethereum · Arbitrum +2

Guides

Guides that mention Everything

All guides
  • NFT

    What Happened in the $690,000 CryptoPunks Whale Buy?

    In February 2021, a wallet associated with a DeFi whale bought three zombie CryptoPunks for 130 ETH, reported at the time as more than $690,000. The purchase was a notable NFT transaction, not evidence of a guaranteed return or a current market trend.

Where the answers come from

Sources

  1. defillama.com/protocol/everything(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.