Skip to content
HelpfulCoin

Button Wrappers Review: How Its Lending Vault Works

Button Wrappers appears to be Buttonwood’s crypto lending vault, which routes USDX into lending pools. Its fees, audit status and operator details are not sufficiently documented for confident use.

Researched and written by the HelpfulCoin teamChecked 9 questions answered

The short answer

Button Wrappers may suit experienced DeFi users who understand lending-pool risks and can verify the contracts themselves. Its vault offers a simple stated process for allocating USDX, but the project does not publish an audit, fee rates, detailed withdrawal terms or operator information. Those gaps make it hard to assess the risks before depositing. Approach cautiously, and avoid depositing funds you may need soon.

Our verdict:Use with caution4.8/10

HelpfulCoin report card

Use with caution

4.8/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
F (3.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
D (4.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
D (5.0 out of 10)
ReputationHow established and openly run it is.
F (3.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Button Wrappers at a glance

Category
CDPs
Product
Buttonwood lending vault
Chains
Base, Ethereum, Avalanche, Arbitrum
Deposit
Stake USDX in the Rollover Vault
Token
No project token identified
Audits
No audit listed
Fees
Commission rates not published
Value locked
$21.9K−14.0% 7d
Last checked

Green flags and red flags

Reassuring

  • The app describes the vault’s deposit and unstake flow in plain steps.
  • The project is marked active and has been tracked since December 2023.

Be careful about

  • No audit is listed, and the vault’s contract safeguards are not explained.
  • The app does not publish commission rates or detailed pool risks.
  • The project does not publish withdrawal limits, processing times or KYC requirements.
  • The operators and licence status are not disclosed in the project details.

What is Button Wrappers and what can you do with it?

Button Wrappers appears to be the Buttonwood app’s lending and tranche product, but its current app describes a Rollover Vault rather than explaining a specific wrapper or tranche strategy. The app says you can stake USDX; the vault then allocates funds to available lending pools, starting with the lowest commission tier. It also has Borrow, Lend, Manage and Points sections. The project is described as operating on Base, Ethereum, Avalanche and Arbitrum, but the app content does not spell out which functions are available on each chain. No token is identified for the project. In short, it is a crypto lending interface where users can deposit into a vault and receive a proportional share of its assets. That share can include exposure to multiple pools and their borrowers, so it is not the same as holding USDX in a wallet.

Is Button Wrappers safe to use?

Button Wrappers is difficult to rate as safe because it does not publish an audit, and the app does not explain custody or smart-contract safeguards. The vault pools users’ deposits into lending activity, so losses could result from contract bugs, borrower defaults, or problems with assets held by a pool. The app says users can unstake at any time, but that does not guarantee immediate access to the same assets or protect against losses in vault value. No licence or security incident history is published. Treat this as a high-risk DeFi product, not a bank account or guaranteed-yield product. Before connecting a wallet, check the contract addresses and network directly through Buttonwood’s official channels, and do not deposit funds you cannot afford to lose. A small test deposit can limit the amount exposed while you learn how the vault behaves.

Is Button Wrappers legit, and who runs it?

Buttonwood presents a working lending app, but Button Wrappers’ public track record and operators are not sufficiently documented to establish a strong reputation. The app offers Borrow, Lend, Manage and Points areas and describes a vault that routes deposits into available pools. The project is marked active and has been tracked since December 2023, but that alone does not show who runs it, how long deposits have been operating, or whether users have successfully withdrawn over time. No team details, licence, published audit, or incident record are available in the project details. This means legitimacy is not the same as safety: an interface can be accessible without providing enough information to assess the people or contracts behind it. Look for named operators, verified contract addresses and independent security work before depositing. If those checks cannot be completed, it is reasonable to wait.

What fees does Button Wrappers charge?

Button Wrappers does not publish a complete fee schedule or precise costs for using the Rollover Vault. The app says deposits are allocated from the lowest commission tier upward, which indicates that commissions apply to at least some lending pools, but it does not show the rates or explain how they affect your returns. You may also pay blockchain transaction fees when approving, staking or unstaking tokens; these vary by network and congestion. The amount you ultimately receive can also change with the performance and assets of the underlying lending pools. Check the app’s transaction preview and any pool-specific terms before approving a deposit, and compare the quoted amounts with the amount you expect to receive. Do not assume that “lowest commission” means no fee, or that the vault’s displayed balance is a guaranteed withdrawal amount.

How does the Button Wrappers Rollover Vault work?

To use Button Wrappers, connect a compatible crypto wallet to the Buttonwood app and select the network and asset you intend to use. The Rollover Vault’s stated process is to stake USDX; it then lends into available pools each cycle, starting with the lowest commission tier and moving upward. The app provides Stake and Unstake actions, and its description says you can unstake at any time for your proportional share of the vault’s assets. This is an automated allocation strategy, so a deposit is not simply held idle as USDX. Before signing, verify the network, token and transaction details in your wallet, and confirm the vault contract through official project channels. Start with a small amount if you proceed. The app does not publish enough detail to explain how each pool is selected, what protections apply to borrowers, or how often cycles run.

How do you deposit and withdraw from Button Wrappers?

Button Wrappers says you can unstake at any time and receive your proportional share of vault assets, but it does not publish withdrawal processing times, minimums, maximums or a full limits schedule. Because the vault’s assets are deployed into lending pools, the amount and composition you receive may depend on what the vault holds when you unstake; “any time” should not be read as a guarantee of instant cash withdrawal. Deposits are made by staking USDX, not by a bank transfer described in the app. The app does not explain fiat deposits or withdrawals, nor does it publish KYC requirements or the conditions that might trigger identity checks. You should expect to need a crypto wallet and to pay network fees for transactions. Check the unstake preview and available withdrawal assets before committing funds, and do not deposit money that you may need immediately.

Before you deposit: a quick checklist

  • Confirm you are using Buttonwood’s official app and verify contract addresses before signing.
  • Check which supported network and USDX token the vault actually accepts.
  • Find the commission schedule and pool terms before depositing; rates are not published in the app details.
  • Review the unstake transaction and expected assets; instant cash withdrawal is not promised.
  • Consider the lack of a published audit and deposit only what you can afford to lose.

5 steps

How to get started with Button Wrappers

  1. 1

    Open Buttonwood’s official app and verify the domain and contract details through official project channels.

  2. 2

    Connect a wallet on a supported network, then confirm the accepted USDX token and vault address.

  3. 3

    Read the pool terms and check commission rates and the transaction preview before approving anything.

  4. 4

    If you choose to proceed, test with a small deposit and confirm how the unstake process works.

  5. 5

    Keep enough of the network’s native token in your wallet to cover transaction fees.

Plain English

Jargon explained

Vault
A group of assets placed into a strategy and managed together.
Commission
A fee charged for using or earning from a lending pool.
Proportional share
The share of a pool’s assets that belongs to a depositor.

Quick answers about Button Wrappers

Does Button Wrappers have its own token?

No project token is identified. The app names USDX, USDG, CONSOL, ETH and WETH among its assets, but does not describe a Button Wrappers governance token.

Which networks does Button Wrappers support?

The project is associated with Base, Ethereum, Avalanche and Arbitrum, but the app details do not specify which vault functions or assets are available on each network. Check the app’s network selector before transferring tokens.

When does the Buttonwood Genesis campaign open?

The app announces a Genesis campaign opening on November 15, 2026. It does not give enough information to assess campaign eligibility, rewards or terms, so read the campaign conditions before participating.

Compare

Button Wrappers alternatives

All alternatives
Sky Lending logoScore 5.6 out of 10

Sky Lending is an Ethereum DeFi borrowing and savings ecosystem; check its fees, collateral rules and audit details before using it.

TVL $3.74B−8.3%Ethereum
Liquity V1 logoScore 6.5 out of 10

Liquity V1 lets you borrow LUSD against ETH without ongoing interest, but fees, liquidation risk and independent frontends call for care.

TVL $130M−13.6%Ethereum
Liquity V2 logoScore 6.1 out of 10

Liquity V2 lets you borrow BOLD against ETH or staked ETH at a rate you choose, but independent frontends and liquidation risk require care.

TVL $70.7M−16.1%Ethereum
crvUSD logo

crvUSD

CDPs

Score 5.6 out of 10

crvUSD is Curve’s Ethereum stablecoin, backed by crypto collateral; useful for experienced borrowers, but exposed to liquidation and depeg risk.

TVL $73.6M−30.4%Ethereum
Frankencoin logoScore 5.8 out of 10

Frankencoin is a collateral-backed Swiss-franc stablecoin protocol worth a look with caution: ZCHF is not insured cash.

TVL $48.5M−19.1%Ethereum
Angle logo

Angle

CDPs

Score 5.2 out of 10

Angle is a multi-chain stablecoin DeFi app for swapping, borrowing and yield; its contract and collateral risks call for caution.

TVL $1.55M−3.6%Ethereum · Arbitrum · Polygon +5

Same category

More CDPs

CDPs rankings
Makerdao logoScore 6.8 out of 10

Maker Governance is a proposal and voting portal for Maker/Sky; it is useful to follow, but check whether an action uses MKR or SKY.

Ethereum
Parallel Protocol V3 logoScore 5.9 out of 10

Parallel Protocol V3 mints USDp and offers sUSDp savings; it merits a cautious look because collateral, contract and yield risks remain.

TVL $852K+0.0%Hyperliquid L1 · Base · Ethereum +2
Score 5.8 out of 10

Liquity is an Ethereum protocol for borrowing BOLD against ETH; its user-set rates offer flexibility, but loans and third-party frontends carry risk.

Ethereum
Thala CDP logoScore 5.7 out of 10

Thala is an Aptos DeFi protocol for Move Dollar borrowing and trading; its audits are a positive sign, but key loan terms need checking.

TVL $415K−3.8%Aptos
Inverse Finance Frontier logoScore 5.6 out of 10

Inverse Finance is an Ethereum borrowing and yield protocol worth researching, but its smart-contract, liquidation and stablecoin risks call for caution.

TVL $4.30M−13.3%Ethereum
Mezo Borrow logoScore 5.6 out of 10

Mezo Borrow lets you borrow MUSD against Bitcoin, but missing audit and fee details make it a cautious look.

TVL $1.10M−14.7%Mezo

Same chain

More on Base

Base rankings
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.29B−13.4%Ethereum · Base · Arbitrum +38
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.1B−9.2%Ethereum · Base · Arbitrum +18
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $719M−16.7%Ethereum · Base · Polygon +14
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.05B−10.1%Ethereum · Robinhood Chain · Base +19
Bitvavo logo

Bitvavo

Centralized Exchanges

Score 6.9 out of 10

Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.

TVL $329M+7.8%Ethereum · Bitcoin · Solana +9

Where the answers come from

Sources

  1. defillama.com/protocol/button-wrappers(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.