SubQuery Network Review: Is It Safe and Legit?
SubQuery Network provides blockchain data indexing, RPC infrastructure, and AskSubQuery, an AI tool for querying blockchain data. Its 2026 security incident and unpublished service details warrant caution.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
SubQuery Network may suit developers and analysts who need blockchain data indexing, RPC, or quick natural-language queries. AskSubQuery’s low-friction approach is useful, but exact costs and important service details are not published on the homepage. More importantly, a SubQuery blog result reports a 2026 vulnerability exploited in three transactions, without establishing the impact or recovery outcome. Avoid putting meaningful funds or critical workflows at risk until those security details and remediation are clear.
Our verdict:Avoid4.2/10
HelpfulCoin report card
Avoid4.2/ 10 overall
Serious problems, or it no longer works.
- SafetyHow funds are held, audits, licence, incidents.
- F (3.5 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- B (7.0 out of 10)
- ReputationHow established and openly run it is.
- D (5.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Subquery Network at a glance
- What it is
- Blockchain data indexing, RPC and AI query tools
- AI tool
- AskSubQuery
- Chains
- Ethereum, Base
- Token
- SQT
- Query payment
- Pay-as-you-go by credit card
- Security
- 2026 incident reported; outcome needs checking
- Last checked
Green flags and red flags
Reassuring
- SubQuery has public documentation, a blog, GitHub, and social channels.
- AskSubQuery is presented as a way to query blockchain data without writing GraphQL.
- The homepage describes both credit-card pay-as-you-go access and a daily-query benefit for SQT holders.
Be careful about
- A SubQuery blog result reports a vulnerability exploited in three transactions on April 12, 2026; the impact and recovery outcome are unclear.
- SubQuery does not publish exact AskSubQuery prices or the SQT holder query allowance on its homepage.
- The homepage does not identify the legal operator or publish an audit or licence.
What is SubQuery Network and what can you do with it?
SubQuery Network is Web3 data infrastructure, including blockchain data indexing, decentralized RPC, and AskSubQuery, an AI tool for asking questions about blockchain data. AskSubQuery turns a natural-language question into a query and returns results, so users do not need to write GraphQL queries or design schemas themselves. The homepage says it can connect to SubQuery, The Graph, Covalent, and Codex data sources. Developers can also use SubQuery’s indexing and RPC infrastructure in blockchain applications. This is a data service, not a crypto exchange or a place to store savings. SQT is its associated token, and the site says SQT holders can unlock free daily AskSubQuery queries. The product may suit developers and analysts who need blockchain data, but users should check the service’s pricing, security disclosures, and token terms before relying on it.
Is SubQuery Network safe to use?
SubQuery Network carries a notable security warning: a SubQuery blog search result describes an incident dated April 12, 2026, in which three separate transactions exploited a vulnerability. It mentions a full disclosure and recovery plan, but does not say how much was affected, whether funds were recovered, or whether remediation is complete. That uncertainty makes it difficult to judge the present security risk. The homepage describes data infrastructure and an AI query service, but does not publish an audit, custody model, or detailed security controls. Avoid treating SQT or any service balance as risk-free, and do not connect a wallet or fund an account until you have read the incident disclosure and understand its outcome. The product’s data-query function may not require the same exposure as depositing crypto into a financial protocol, but any wallet or payment interaction still deserves care.
Is SubQuery Network legit?
SubQuery Network appears to be an active Web3 infrastructure project, but the public-facing homepage does not identify the legal entity or named people responsible for operating it. It does provide links to documentation, a blog, GitHub, and social channels, which gives users places to assess its development and communications. A third-party project profile dates to June 2022, suggesting the project was publicly described by then, though that alone does not establish a strong operating record. The 2026 security incident also matters when weighing its track record: users should read the incident disclosure and recovery updates before relying on the service. The homepage does not publish a licence, and a licence may not apply to a data-infrastructure provider in the same way it would to a broker or bank. Overall, SubQuery has a recognizable product and public channels, but its operator and incident-response record need more scrutiny.
How much does SubQuery Network cost, and can you withdraw money?
SubQuery says developers can pay for AskSubQuery queries as they go using a credit card, while SQT holders can unlock free daily queries. It does not publish the credit-card price per query, the number of free daily queries, or any subscription or usage limits on its homepage. The site also does not give a complete fee schedule for indexing or RPC services, so check the relevant product terms before building a budget around them. This is not presented as an exchange account: no standard crypto deposit or withdrawal process, withdrawal limits, or cash-out timeline is described. If you pay by card, check the checkout terms, recurring-payment settings, and refund policy before authorizing a charge. If you use SQT, remember that token prices can change and that holding a token does not guarantee a particular amount of service. AskSubQuery does not publish KYC requirements on its homepage; check its terms if registration or payment asks for identity details.
How does AskSubQuery work, and how do you get started?
To use AskSubQuery, open the service through SubQuery’s official site, review its terms, and check whether a paid account is required for the queries you want. The product is designed to accept ordinary-language questions, generate a data query, and return results without requiring you to write GraphQL or set up schemas. Developers can pay as they go by credit card; the homepage says SQT holders can receive free daily queries. It does not explain the precise account setup, supported payment regions, query quotas, or how to export results, so confirm those details before depending on the tool for work. Start with a simple, non-sensitive question and inspect the result before using it in analysis or an application. For developer use, read the documentation for the specific indexing or RPC product rather than assuming AskSubQuery and the infrastructure services have the same setup or pricing.
What is SQT used for on SubQuery Network?
SQT is SubQuery Network’s token, and the homepage gives it a stated service benefit: SQT holders can unlock free daily AskSubQuery queries. The homepage does not specify how many queries are free, how token holdings are checked, whether tokens must be staked, or what other network functions SQT supports. Do not assume that holding SQT gives a fixed amount of service or that the token’s market value is stable. The project is classified as supporting Ethereum and Base, but the homepage does not explain which chain is used for each SQT function or how to move tokens between chains. Verify the token contract and chain through SubQuery’s official documentation before sending any crypto; similarly named tokens and incorrect networks can result in loss. Treat the daily-query benefit as a utility feature, not as a promise of investment returns.
Can you rely on AskSubQuery’s blockchain answers?
SubQuery presents AskSubQuery as an AI interface for blockchain data, not as a substitute for checking the underlying query and source data. Its homepage says the tool connects to SubQuery, The Graph, Covalent, and Codex, and describes a flow in which a question becomes a generated query and then results. AI-generated queries can misunderstand an ambiguous question, and data services can differ in coverage or freshness. The homepage does not publish service-level guarantees, accuracy benchmarks, or a complete list of supported datasets. For financial, compliance, or production decisions, verify important results against the underlying data source and documentation. The tool may save time for exploratory analysis, but users should not treat a conversational answer as independently verified fact. Developers should also test the outputs and query behavior before integrating them into an application.
Before you deposit: a quick checklist
- Read SubQuery’s full disclosure and recovery updates about the April 12, 2026 security incident.
- Check the exact AskSubQuery query price, free-query allowance, and payment terms before paying.
- Verify SQT’s contract and network in SubQuery documentation before transferring tokens.
- Confirm whether the specific indexing or RPC service you need has separate pricing and setup.
5 steps
How to get started with Subquery Network
- 1
Read SubQuery’s security incident disclosure and check whether its recovery and remediation are complete.
- 2
Use SubQuery’s official documentation to identify the exact service, chain, and setup you need.
- 3
Check current query pricing, free-query limits, payment terms, and any KYC requirements before registering or paying.
- 4
If using SQT, verify its contract and network against SubQuery’s documentation before transferring tokens.
- 5
Test AskSubQuery results against underlying data before relying on them in an application or important analysis.
Plain English
Jargon explained
- GraphQL
- A language developers use to request specific data from an API.
- Indexer
- Software that organizes blockchain activity into queryable datasets.
- RPC
- A service that lets applications communicate with a blockchain.
Quick answers about Subquery Network
Do SQT holders get free AskSubQuery queries?
SubQuery’s homepage says SQT holders can unlock free daily queries, but it does not specify the daily allowance or any holding requirement.
Does SubQuery publish its query prices?
The homepage describes credit-card pay-as-you-go queries and a benefit for SQT holders, but does not publish exact query prices or a full fee schedule.
Does SubQuery require KYC?
The homepage does not publish KYC requirements. Check the service terms and payment process before signing up or paying.
Compare
Subquery Network alternatives
Bio Protocol is a decentralized-science ecosystem with BIO token uses, but missing audit, custody and fee disclosures warrant caution.
Juicebox V1 is an Ethereum fundraising protocol; its open code helps, but check project rules, fees and contract risks before contributing.
Aerodrome Ignition launches tokens through Base liquidity pools; its open-market design is worth a look, but audits and fees need checking.
Royco V2 splits onchain yield into risk-based tranches; it may suit experienced DeFi users, but check each market’s risks and exit terms.
Royco V1 splits onchain yield into risk tranches; it is worth researching, but verify audits and exit terms before depositing.
Flap.sh is an EVM-chain token launchpad and trading platform, but its unpublished safety and fee details call for caution.
Same category
More Other dApps
Tron Discount is a TRON Energy marketplace that may lower transaction costs, but its operator and audit status are unclear.
Packs is a crypto creator terminal for launches, trading and wallet analysis; its features and fees are clear, but key security and operator details are limited
Metaplex is a Solana platform for launching and trading digital assets; it is worth exploring, but assess each sale and issuer carefully.
Gate Fun is a social meme-token launchpad on Gate Layer; it is worth a look only with care, as fees and audit details are unpublished.
Juicebox V3 is an Ethereum platform for project funding; its transparency is useful, but check project rules, fees and contract risks.
Flood is an Ethereum swap mechanism with Aave-backed FLOOD reserves; its novel design is worth examining, but yields and safety are not guaranteed.
Same chain
More on Ethereum
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Where the answers come from
Sources
No public sources were recorded for this page.
Last checked . Something wrong or out of date? Let us know and we will fix it.