Is STON.fi Safe and Legit? A TON DEX Review
STON.fi is a decentralized exchange for swapping tokens on the TON blockchain. It may suit TON users who want wallet-based trading, but audit, team and fee details are limited.
Researched and written by the HelpfulCoin teamChecked 9 questions answered
The short answer
STON.fi may suit people who already use TON and want to swap tokens from a connected wallet. Its AMM model avoids an exchange-held account balance, but swaps still carry smart-contract, token and liquidity risks. A published audit, full fee schedule and clear details about who runs the project are not available to verify. Check the quote and wallet request carefully, keep TON for network fees, and begin with a small trade if you decide to use it.
Our verdict:Use with caution5.5/10
HelpfulCoin report card
Use with caution5.5/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (4.5 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- B (7.0 out of 10)
- ReputationHow established and openly run it is.
- D (5.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
STON.fi at a glance
- What it is
- Decentralized exchange and AMM
- Chain
- TON
- Token
- STON
- Status
- Active
- Audits
- No audit identified
- Value locked
- $20.5M+3.1% 7d
- Last checked
Green flags and red flags
Reassuring
- STON.fi is specifically built for token swaps on TON.
- Its site provides documentation, a whitepaper, GitHub and support sections.
- Wallet-based trading avoids holding an exchange account balance with STON.fi.
Be careful about
- A published smart-contract audit is not available to verify.
- STON.fi does not publish a complete swap-fee schedule in its project details.
- The team, licence and operating track record are not established by the project details.
What is STON.fi and what can you do with it?
STON.fi is a decentralized exchange (DEX) on TON where you can swap supported tokens and use liquidity pools. It uses an automated market maker (AMM): instead of matching each trade with another person, smart contracts use token pools to make swaps. The site also has sections for staking, Spotlight and DAO governance, though the exact features and terms for each can change. You need a TON-compatible crypto wallet and assets on the TON network to use the exchange; STON.fi is not a conventional account-based broker. The project’s homepage describes swapping TON tokens, including GRAM. Token availability, pool depth and prices can differ, so check the trade details before approving a swap. A DEX can be useful for trading TON-based assets, but it does not remove the risks of volatile tokens, thin liquidity or mistakes when sending crypto.
Is STON.fi safe to use?
STON.fi’s non-custodial DEX model means swaps are made from a connected wallet rather than by depositing funds into a conventional exchange account. That reduces the need to trust an exchange to hold your balance, but it does not make the service risk-free: wallet approvals and smart-contract transactions can still expose funds to bugs, malicious tokens or user error. A published smart-contract audit is not available to verify, and no licence or incident record is established by the project details. Treat that as a meaningful gap, not proof that the contracts are unsafe. Before trading, check that you are using the genuine STON.fi app, review each wallet request and test with a small amount. Never share a wallet recovery phrase. Also remember that transactions on TON are generally irreversible once confirmed.
Is STON.fi legit, and who runs it?
STON.fi is an identifiable, active TON-based exchange, but the public facts available do not establish who runs it, when it launched or what its operating track record is. It provides links to documentation, a whitepaper, GitHub, support and terms, which are useful places to examine its mechanics and policies. Those resources do not, by themselves, prove the identity or reliability of the people behind the project. No licence is published in the project details, and no verifiable smart-contract audit is available to assess. A DEX does not work like a regulated broker, and legal protections can be limited. Before relying on STON.fi, read its terms, inspect the contract and governance information, and look for independent security disclosures. Do not treat the presence of an active app or a governance token as a guarantee that the project will remain available or that a trade will be profitable.
What fees does STON.fi charge for swaps?
STON.fi does not publish a complete fee schedule in the project details. A swap can involve a pool fee, price impact or slippage, as well as a TON network transaction fee. Price impact is the way a trade can move the pool’s price; slippage is the difference between the expected and final exchange rate. The exact amounts depend on the selected tokens, pool and trade size, so check the quoted rate and any fee breakdown in the app before approving. Network fees are separate from the amount exchanged, and you generally need TON in your wallet to pay TON transaction fees. A displayed quote can change before confirmation, particularly in a low-liquidity pool. Compare the amount you will receive with the amount sent and consider whether the trade still makes sense if the final rate is worse. Do not assume that a token swap is free just because there is no account deposit charge.
How do you swap tokens on STON.fi?
To swap on STON.fi, connect a TON-compatible wallet, choose the token to send and the token to receive, enter an amount, then review the quote before signing the transaction in your wallet. The wallet is where you approve the on-chain action; STON.fi does not need your recovery phrase. Keep TON available for network fees. Check the token names and addresses carefully, since similarly named or unfamiliar tokens may not be genuine. Review the expected output, any displayed fee and the price impact or slippage before confirming. After signing, wait for the TON transaction to complete and check the result in your wallet. A swap is not guaranteed to succeed at the quoted price, and a transaction fee may still be spent if an on-chain transaction fails. For a first use, make a small test trade rather than risking a large amount. Never approve a wallet request you do not understand.
How do you deposit to and withdraw from STON.fi?
STON.fi is not a bank or a fiat on-ramp: you generally fund your connected wallet with TON-network assets, then swap from that wallet. To add crypto, use a service that supports TON or receive a transfer to your wallet, checking the network and token address before sending. Deposits to a DEX are not normally account balances; the transaction happens from your wallet when you approve it. To get value out, swap into a token you want to hold or transfer assets from your wallet to another wallet or service that supports them. STON.fi does not publish withdrawal limits or processing times, and conventional exchange withdrawals are not the right model for a wallet-based DEX. You remain responsible for wallet security and any transfer fees. Check that the receiving service supports the exact token and TON network; sending on the wrong network or to an incompatible address can result in lost funds. Identity checks may apply at any separate fiat exchange you use, not necessarily at the DEX.
Before you deposit: a quick checklist
- Confirm the app is the genuine STON.fi interface before connecting your wallet.
- Keep TON in your wallet for network transaction fees.
- Review the token address, quote, pool liquidity and price impact before swapping.
- Treat wallet approvals carefully; never share your recovery phrase.
- Start with a small trade because a published smart-contract audit is not available to verify.
5 steps
How to get started with STON.fi
- 1
Check that STON.fi is the genuine app and read its terms and documentation.
- 2
Set up a TON-compatible wallet and secure its recovery phrase offline.
- 3
Fund the wallet with the TON-network assets you plan to use, including TON for transaction fees.
- 4
Connect the wallet, choose the tokens and review the quote, fees and price impact.
- 5
Approve a small test swap only if the token and transaction details look right.
Plain English
Jargon explained
- AMM
- A trading system that uses token pools and smart contracts to set swap prices instead of matching buyers and sellers.
- Slippage
- The difference between the expected swap rate and the rate you receive when the trade completes.
- Liquidity pool
- A smart-contract pool of tokens that traders use to make swaps.
Quick answers about STON.fi
What is the STON token used for?
STON is STON.fi’s token. The project provides a staking section and DAO governance section, but check the app’s current terms before using either; token ownership does not guarantee a return or voting influence.
How can I contact STON.fi support?
STON.fi’s homepage includes a support section with contact, FAQ and report-abuse options. Never send support staff your recovery phrase or sign a wallet request just to receive help.
Is STON.fi a gambling site?
STON.fi is a crypto service, not a gambling product. Check local rules that apply to crypto trading and token use before connecting a wallet.
Compare
STON.fi alternatives
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
DeDust is a TON DEX for swaps and liquidity; its limited public security and fee details make careful use important.
PumpSwap is a Solana DEX linked to Pump.fun; it may suit experienced traders, but memecoin, liquidity, and audit risks warrant caution.
PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.
Same category
More DEXes
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.
PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.
PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
Same chain
More on TON
Hipo is a TON liquid-staking protocol for GRAM; its audits and 0% fee are positives, but contract and liquidity risks remain.
Getgems is a TON NFT marketplace for trading and creating digital collectibles; it may suit TON users, but transparency on security and fees is limited.
OKX is a large centralized crypto exchange with varied trading tools; check custody, fees and regional rules before depositing.
Gate is a long-running centralized exchange with extensive crypto markets, but custody and proof-of-reserves limitations merit caution.
HashKey Exchange is a centralized crypto exchange with a Hong Kong-regulated service; check regional terms and custody risks before depositing.
Symbiosis is a cross-chain swap and bridge protocol; its non-custodial design is useful, but route and contract risks remain.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.