Skip to content
HelpfulCoin

Is SolRecover Safe and Legit? 2026 Review

SolRecover is a Solana tool for closing empty token accounts and recovering their rent deposits. It charges a 1.9% service fee, but its operators and independent security review are not public.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

SolRecover may suit Solana users who want a visual way to recover rent from empty token accounts. Its 1.9% service fee is clearly stated, and it says recovered SOL goes directly to your wallet after you sign. The main caution is limited public accountability: the operators and an independent audit are not published, and Token-2022 scanning may be unavailable. Review the exact transaction in your wallet before approving.

Our verdict:Use with caution5.8/10

HelpfulCoin report card

Use with caution

5.8/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
D (5.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
B (8.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
B (8.0 out of 10)
ReputationHow established and openly run it is.
D (4.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Solrecover at a glance

What it is
Solana empty-account rent recovery tool
Chain
Solana
Service fee
1.9% of recovered SOL
Custody
Wallet-signed; says it is non-custodial
Batch limit
Up to 20 account closures per transaction
Token
None required
Last checked

Green flags and red flags

Reassuring

  • The service fee is shown as 1.9%, with referral rewards included in that total.
  • SolRecover says you sign transactions in your own wallet and it never needs your seed phrase.
  • The fee wallet address is disclosed so on-chain fee transfers can be checked.

Be careful about

  • SolRecover does not publish an independent security audit or identify its operators.
  • Its interface warns that Token-2022 scanning may be unavailable.
  • The service depends on you checking wallet instructions before signing.

What is SolRecover and what does it do?

SolRecover is a Solana tool that closes empty token accounts and sends the rent deposit they hold back to your wallet. Solana requires a small rent-exempt deposit to keep token accounts open; closing an eligible empty account returns that deposit. SolRecover is a convenience interface for this task, not a wallet, exchange or token. It says it scans accounts without moving funds, then prepares a transaction for you to review and sign in your own wallet. Its stated service fee is 1.9% of the recovered SOL, with network fees paid separately. The tool supports common Solana wallets, including Phantom, Solflare and Backpack. It is useful if you have empty token accounts and would rather use a visual interface than the Solana command line. You do not need to buy a SolRecover token.

Is SolRecover safe to connect a Solana wallet to?

SolRecover describes a non-custodial process: it says it reads public account data, builds transactions locally and requires you to sign in your wallet. If accurate, that means the service does not take custody of your private keys or hold recovered SOL. Its interface says it closes only token accounts with zero balances, and shows the transaction details before signing. These are useful safeguards, but they do not remove the need to inspect the wallet prompt: a wallet signature authorizes an on-chain action. The project does not publish an independent security audit or a clear incident history. Before approving, check that the transaction closes only empty accounts, sends the expected net SOL to your wallet and directs the disclosed fee to the expected address. If anything differs, cancel rather than sign.

Is SolRecover legit, and who runs it?

SolRecover appears to serve a specific, verifiable purpose: recovering rent from empty Solana token accounts, with a fee address and on-chain transactions that can be checked. It also provides explanatory documentation and says it does not require an account. However, the people or company operating SolRecover are not identified in its product information, and it does not publish an independent audit or a detailed operating history. That makes its public track record difficult to assess. The on-chain fee address offers transparency about where the service fee goes, but it does not by itself establish who controls the service or guarantee the transaction builder is safe. Treat SolRecover as a real, working-style utility with limited public accountability, not as a fully vetted financial institution. Confirm the transaction in your wallet before signing.

How much does SolRecover charge?

SolRecover charges a 1.9% service fee on the SOL recovered, and the scan is described as free. Solana network fees are additional; the service estimates about 0.000005 SOL per transaction. Its interface says up to 20 accounts can be closed in one transaction, with larger recoveries split into batches. If a referral link is used, 1% of the recovery goes to the referrer and 0.9% to the platform, while the total service fee remains 1.9%. The fee is taken in the recovery transaction rather than as a separate payment. The rate is clear, but the amount recovered depends on the rent in your eligible accounts, so the actual fee varies. Compare the displayed gross recovery, fee and net amount before you approve; you can also use Solana CLI to close accounts yourself and pay network fees instead.

How do you use SolRecover to reclaim SOL?

To use SolRecover, connect a Solana wallet, let it scan for empty token accounts, review the accounts and amounts it finds, then approve the transaction in your wallet. SolRecover says the scan is read-only and that transactions are built locally. It groups closures in batches of up to 20 accounts per transaction. Review the wallet prompt rather than relying only on the website’s summary: verify the accounts being closed, the fee and the wallet receiving the returned SOL. The returned rent is split in the same transaction, with 98.1% going to your wallet and 1.9% to the service and any referrer. The tool says it supports Phantom, Solflare, Backpack and other Solana wallets, including Ledger hardware-wallet use. Do not share a seed phrase; the service says it does not need one.

How do SolRecover deposits, withdrawals and limits work?

You do not make a conventional deposit into SolRecover. You connect a Solana wallet containing the accounts you want to close, and the recovered SOL is sent to that wallet in the on-chain transaction. You need a small amount of SOL to pay network fees; SolRecover estimates about 0.000005 SOL per transaction. It does not describe a separate withdrawal process, because the funds are returned directly to your wallet. The stated batching limit is 20 account closures per transaction, with additional transactions for larger scans; the project does not publish a separate maximum recovery amount or withdrawal limit. SolRecover says no account creation is needed, but it does not publish a KYC policy. Wallet access and transaction signing are still required, so check the exact instructions and net amount shown by your wallet before approving.

Does SolRecover support Token-2022 accounts?

SolRecover says it supports Token-2022 accounts, but its interface also displays a warning that the Token-2022 scan may be unavailable and some accounts may not appear. That means a scan may not find every eligible account, even though the product describes support for the token standard. Do not assume a scan showing no results proves that no rent can be recovered. If you have Token-2022 accounts, check whether the scanner reports that limitation before deciding the scan is complete. SolRecover does not publish a guarantee that every account type will be detected. The core rule remains that only empty accounts can be closed; move or sell any tokens first using a method you trust, and verify the account balances before approving closures. You can also look into the Solana command-line method if the scanner misses accounts.

Before you deposit: a quick checklist

  • Check that every account in the transaction has a zero token balance.
  • Compare the displayed gross recovery, 1.9% fee and net SOL before signing.
  • Verify the fee recipient and transaction instructions in your wallet prompt.
  • Keep enough SOL in the wallet for network fees.
  • If Token-2022 scanning is unavailable, do not assume the scan found every eligible account.

5 steps

How to get started with Solrecover

  1. 1

    Connect a Solana wallet that holds the accounts you want to close; never enter a seed phrase.

  2. 2

    Check whether the scanner reports any Token-2022 limitation.

  3. 3

    Review the accounts found, gross recovery, 1.9% fee, network fee and net return.

  4. 4

    Inspect the wallet transaction instructions and fee recipient.

  5. 5

    Approve only if the transaction closes the intended empty accounts and returns the expected SOL.

Plain English

Jargon explained

Rent
The SOL deposit required to keep a Solana account open; eligible empty accounts can return it when closed.
Wallet approval
A transaction signature from your wallet that authorizes an on-chain action.
Token-2022
A token-account standard on Solana with additional token features.

Quick answers about Solrecover

What is Solana account rent?

It is a refundable SOL deposit that keeps an account open on Solana. Closing an eligible empty token account returns its rent deposit.

Can I use SolRecover with a Ledger?

SolRecover says it supports Ledger hardware wallets, as well as several browser and mobile wallets. Confirm that your wallet connection and signing flow work for your setup before approving a transaction.

Does SolRecover have a referral programme?

Yes. SolRecover says it offers referral rewards of 1% of a referred recovery. The referred user still pays the same total 1.9% fee; the reward comes out of that fee.

Compare

Solrecover alternatives

All alternatives
Sol Incinerator logo

Sol Incinerator

Dapp Tools

Score 6.2 out of 10

Sol Incinerator reclaims rent from empty Solana token accounts; it is useful, but check fees and wallet transactions carefully.

Solana
Divvy logo

Divvy

Dapp Tools

Score 5.2 out of 10

Divvy is a Solana app for pump.fun fee splits and token pools, but its fees, operator and security details are unclear.

Solana
GMGN logo

GMGN

Dapp Tools

Score 5.4 out of 10

GMGN is a meme-token trading terminal with wallet analytics and copy trading, but key safety and fee details are not published.

Solana · BNB Chain · Ethereum +3
Flip Meme logo

Flip Meme

Dapp Tools

Score 6.2 out of 10

Flip Meme (DryFlip) is a free memecoin paper-trading extension; it avoids wallet custody, but its operator and security record are not public.

Solana · BNB Chain · Ethereum +2
DexLab logo

DexLab

Dapp Tools

Score 6.0 out of 10

DexLab is a Solana token creation and management toolkit with clear tool fees, but no published audit or licence.

Solana
Minty Art logo

Minty Art

Dapp Tools

Score 5.3 out of 10

Minty Art is a multi-chain NFT creation app with a built-in wallet; check custody, fees and storage before using it for valuable assets.

Ethereum · Solana · BNB Chain +2

Same category

More Dapp Tools

Dapp Tools rankings
Smart Profit logo

Smart Profit

Dapp Tools

Score 7.0 out of 10

Smart Profit is a free crypto calculator suite worth a look for estimates, but its outputs are not independently verified advice.

Prediction Game logo

Prediction Game

Dapp Tools

Score 6.5 out of 10

Prediction Market Tools is a directory and guide site for prediction-market platforms and tools; useful for discovery, but verify each listing yourself.

Airdrop logo

Airdrop

Dapp Tools

Score 6.2 out of 10

AirdropAlert is a crypto airdrop directory and guide site; it is useful for discovery, but verify campaigns before connecting a wallet.

Coinrule logo

Coinrule

Dapp Tools

Score 6.2 out of 10

Coinrule automates trades through connected platforms; it offers useful tools but carries trading risk and excludes EU/EEA customers.

Sol Vanity Address Generator logoScore 5.9 out of 10

Sol Vanity Address Generator creates custom crypto addresses for free, but its unaudited key-generation software warrants caution.

Bitcoin · Ethereum · Solana +1
Disperse logo

Disperse

Dapp Tools

Score 5.8 out of 10

Disperse batches ether and token transfers on Ethereum; it is useful for group payments, but limited security and team disclosures call for caution.

Ethereum

Same chain

More on Solana

Solana rankings
Lido logo

Lido

Staking Pool

Score 7.1 out of 10

Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.

TVL $17.8B−14.9%Ethereum · Solana · Terra +2
Bitvavo logo

Bitvavo

Centralized Exchanges

Score 6.9 out of 10

Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.

TVL $329M+7.8%Ethereum · Bitcoin · Solana +9
Across logo

Across

Cross Chain Bridge

Score 6.8 out of 10

Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.

TVL $13.4M−11.3%Ethereum · Arbitrum · Optimism +19
Sablier Lockup logoScore 6.8 out of 10

Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.

TVL $1.54M−10.7%Ethereum · Polygon · Arbitrum +25
Laine SOL logo

Laine SOL

Staking

Score 6.8 out of 10

Laine SOL offers native and liquid Solana staking, with a stated 0% pool fee but added risks for laineSOL holders.

TVL $859K−17.7%Solana

Quicknode

Infrastructure

Score 6.8 out of 10

Quicknode is a blockchain infrastructure platform for developers, worth considering for RPC and data tools but with pricing and audit details to check.

Solana

Where the answers come from

Sources

No public sources were recorded for this page.

Last checked . Something wrong or out of date? Let us know and we will fix it.