Is SolanaForge Safe? Fees, Token Creation and Risks
SolanaForge is a no-code tool for creating tokens on Solana, TON and BNB Chain. Its Solana flow uses wallet-signed mainnet transactions, but the operator and independent security checks are not disclosed.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
SolanaForge may suit someone who understands wallet transactions and wants a no-code way to create a Solana token. Its wallet-signed flow and clear stated platform fee are useful, but it does not publish an audit or name its operator. The 0.18 SOL fee is also separate from rent and network costs. Check each transaction carefully, and do not assume creating a token makes it tradable or valuable.
Our verdict:Use with caution5.5/10
HelpfulCoin report card
Use with caution5.5/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (5.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- C (6.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- B (7.0 out of 10)
- ReputationHow established and openly run it is.
- D (4.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Solana Token Creation at a glance
- What it is
- No-code token creation tool
- Chains
- Solana, TON and BNB Chain
- Solana fee
- 0.18 SOL platform fee
- Typical rent
- About 0.012 SOL
- Custody
- Wallet-signed; supply goes to your wallet
- Signup
- No signup required for Solana flow
- Audit
- No audit published
- Last checked
Green flags and red flags
Reassuring
- The Solana flow requires you to approve the transaction in your own wallet.
- SolanaForge says the initial token supply goes to your wallet, not the service.
- The site describes a pre-signing transaction simulation with an estimated cost.
Be careful about
- SolanaForge does not publish an independent security audit or identify a named operator.
- Its stated 0.18 SOL platform fee is separate from typical rent and transaction fees.
- Detailed costs and steps for TON and BNB token creation are not published.
- Revoking authorities can limit what you can change about a token later.
What is SolanaForge and what can you do with it?
SolanaForge is a no-code token creation tool for launching tokens on Solana, TON and BNB Chain. Its Solana service creates an SPL token, adds Metaplex metadata and can pin the token image and metadata JSON to IPFS. You can also choose authority controls and, separately, create a Raydium liquidity pool against SOL or USDC. The Solana launch is a real mainnet transaction, not a testnet preview, and you approve it in your own wallet. SolanaForge says no account or subscription is needed. The homepage also advertises TON Jettons and BNB BEP-20 tokens, but does not provide the same level of detail about their steps or costs. Token creation does not itself make a token valuable or ensure buyers can trade it.
Is SolanaForge safe to use for creating a token?
SolanaForge describes its Solana token flow as non-custodial: you connect a wallet, review the transaction and sign it yourself, while the initial token supply goes to your wallet. That reduces the risk of handing your keys or tokens to the service, but it does not make the website, transaction or token risk-free. A malicious or compromised interface could still present a harmful transaction, so check wallet prompts carefully and use a wallet with only the funds needed. SolanaForge does not publish a security audit, a named security team or a licence. It also does not publish an incident record, which is not proof that no incidents have occurred. Review the exact transaction and costs before approving; do not rely only on the site’s description of its security.
Is SolanaForge legit, and who runs it?
SolanaForge appears to be an operating token-creation service: its site describes mainnet token deployment, wallet signing, metadata tools and Raydium pool creation. That supports identifying what the product does, but it does not by itself establish the operator’s identity or reliability. SolanaForge does not name a company or team in the product information, publish a track record of completed launches, or disclose a financial-services licence. It also does not publish an independent audit. There is no basis to treat it as a regulated exchange or to assume that it will be available indefinitely. Before connecting a wallet, check that you are on the intended SolanaForge domain and inspect each wallet request. For substantial funds or a serious launch, consider whether you can verify the deployment independently or use a developer you trust.
How much does it cost to create a token with SolanaForge?
For the described Solana launch, SolanaForge charges a flat 0.18 SOL platform fee, plus typical on-chain account rent of about 0.012 SOL. The site breaks the typical rent estimate into roughly 0.0015 SOL for the mint, 0.006 SOL for metadata and 0.002 SOL for a token account; these amounts are estimates, not a fixed total for every setup. Network transaction fees may also apply. The site says it shows a transaction simulation with the cost before you sign, so check the wallet prompt and estimate rather than relying on an old figure. It does not require a subscription or signup. Fees for TON and BNB token creation are not published in the product information, and Raydium pool creation requires you to supply both sides of the chosen pair, such as your token and SOL or USDC.
How do you create a Solana token with SolanaForge?
To create a Solana token, connect a compatible wallet such as Phantom or Solflare, enter the token name, symbol, supply and logo, then review the transaction simulation. Decide whether to revoke mint or freeze authority before signing; those controls affect what can be done with the token later. Your wallet must have enough SOL to cover the platform fee, account rent and network fees. Only approve the transaction if the wallet prompt matches the action and cost you expect. The site says the launch transaction creates the mint, sends the initial supply to your wallet and attaches metadata; optional authority changes can be included in the flow. SolanaForge also offers a separate Raydium pool tool, but creating a token alone does not create a market. TON and BNB flows are advertised, though their detailed steps are not published.
How do deposits and withdrawals work with SolanaForge?
SolanaForge is not described as an exchange or wallet balance service, so there is no conventional account to fund or withdraw from. You connect your own wallet and need SOL in it to pay the Solana creation fee, rent and transaction costs. After launch, the initial token supply is sent to that wallet. To make the token tradable through the offered Raydium tool, you choose a pair and deposit both assets into a pool; that is a separate on-chain action, not a withdrawal from SolanaForge. The site says nothing happens until you sign, and closing the wallet prompt means no fee is charged. It does not publish deposit or withdrawal limits because the tool does not describe such account functions. It also does not state a KYC policy; no signup or email is required for the described flow, but that is not the same as a published KYC commitment.
Before you deposit: a quick checklist
- Verify you are on solanaforge.app before connecting your wallet.
- Keep only the SOL needed for the fee and transaction in the connected wallet.
- Check the transaction simulation and wallet prompt, including any authority changes.
- Confirm the token name, symbol, supply and metadata before signing.
- Treat Raydium liquidity as a separate deposit of your token and SOL or USDC.
5 steps
How to get started with Solana Token Creation
- 1
Open SolanaForge directly and confirm the domain before connecting a wallet.
- 2
Use a compatible wallet and keep only the SOL needed for the transaction in it.
- 3
Enter token details and review the simulated cost and selected authority settings.
- 4
Check the wallet prompt against the intended action, then sign only if it matches.
- 5
If you want a market, assess the separate Raydium pool and the assets it requires.
Plain English
Jargon explained
- Mint
- The on-chain account that defines a token’s supply, decimals and authorities.
- Metaplex metadata
- A token’s on-chain name, symbol and link to its image and description.
- Liquidity pool
- A pool of two assets that people can swap against on a decentralised exchange.
Quick answers about Solana Token Creation
Does SolanaForge make a new token tradable automatically?
No. SolanaForge says token creation does not automatically create a market. You need to create and fund a liquidity pool separately if you want buyers to be able to swap the token through that route.
Can you restore a token authority after revoking it?
SolanaForge advertises optional authority revocation. Once an authority is revoked on-chain, it generally cannot simply be restored; check the exact authority change in the transaction before signing.
Which wallets does SolanaForge support?
The described Solana flow supports Phantom and Solflare. The site does not publish a complete wallet compatibility list for its TON and BNB token tools.
Compare
Solana Token Creation alternatives
CreateMyToken is a no-code token deployment tool; it may be useful, but verify its security claims and token controls first.
Envio is a blockchain data and indexing platform for developers; it may suit builders, but pricing and security details need checking.
Sequence is crypto infrastructure for developers; its products are clear, but security, pricing, and acquisition details need checking.
Smithii Tools offers no-code token, NFT and liquidity tools; it is worth a cautious look if you understand wallet transactions and their risks.
Orion Tools is a no-code Solana token creator; its clear setup flow is useful, but audit and operator details are limited.
SlerfTools is a multi-chain token and liquidity toolkit worth examining cautiously; its audits, team and current fees are unclear.
Same category
More Developer Tools
Smithy is an open-source API modelling and code-generation tool; it is worth a look for teams that need consistent multi-language SDKs.
Tron Core is TRON’s developer hub for guides, APIs, and SDKs; useful for building, but not a wallet or fund custodian.
GenTools is a free browser toolkit for fake test data and developer utilities; it is useful for low-risk tasks, with privacy and operator details to check.
Future of Tron is TRON’s developer documentation hub; it is useful for builders, but review code and costs before mainnet use.
Ponder is an open-source TypeScript framework for indexing EVM data; it is worth a look for developers, with infrastructure and maintenance checks.
The Graph indexes blockchain data for apps; it is useful for developers, but check pricing and delegation risks first.
Same chain
More on Solana
Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.
Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.
Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.
Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.
Laine SOL offers native and liquid Solana staking, with a stated 0% pool fee but added risks for laineSOL holders.
Quicknode is a blockchain infrastructure platform for developers, worth considering for RPC and data tools but with pricing and audit details to check.
Where the answers come from
Sources
- spltokenlauncher.pro/comparisons/(opens in a new tab)
- fivesightresearch.com/7-best-solana-token-creation-services/(opens in a new tab)
Last checked . Something wrong or out of date? Let us know and we will fix it.