Skip to content
HelpfulCoin

PulseX V2 Review: Is It Safe to Swap on PulseChain?

PulseX V2 is a PulseChain decentralized exchange for swapping PRC20 tokens. It has limited published safety and fee information, so check the contracts and transaction details before using it.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

PulseX V2 may suit people who already use PulseChain and understand wallet-based token swaps. It provides a way to exchange PRC20 tokens, but PulseX does not publish an audit, complete fee schedule or detailed team and licensing information. Those gaps, alongside the usual smart-contract and token risks of DEX trading, make it important to verify the app, contracts and transaction details before connecting a wallet or swapping.

Our verdict:Use with caution4.8/10

HelpfulCoin report card

Use with caution

4.8/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
F (3.5 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
D (5.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
C (5.5 out of 10)
ReputationHow established and openly run it is.
D (5.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

PulseX V2 at a glance

What it is
Decentralized exchange for token swaps
Network
PulseChain
Token
PLSX
Tracked since
2023-06-02
Audits
No audit published
Value locked
$12.0M−3.1% 7d
Last checked

Green flags and red flags

Reassuring

  • PulseX is specifically described as a token-swapping exchange on PulseChain.
  • The project has been tracked since June 2023.

Be careful about

  • No audit is published about PulseX.
  • PulseX does not publish a complete fee schedule or withdrawal limits.
  • The project does not provide licensing or detailed team information.

What is PulseX V2 and what can you do with it?

PulseX V2 is a decentralized exchange (DEX) for swapping tokens on PulseChain. It lets users exchange PRC20 tokens—tokens issued on PulseChain—with one another. Unlike a traditional exchange, a DEX typically routes trades through blockchain smart contracts and liquidity pools, which are token reserves supplied for trading. PulseX’s app page describes itself as a list of links to ways to run PulseX code, so check that you are using the intended app before connecting a wallet. The project is associated with the PLSX token, but the details provided do not explain what holding PLSX does or whether it is required to trade. PulseX is active, but that alone does not show that a particular token or trading pool is safe or liquid.

Is PulseX V2 safe to use?

There is not enough public safety information to call PulseX V2 low-risk. No audit is published about the project, and no licensing information or security incident history is provided. A DEX swap usually involves smart contracts and a wallet, but PulseX’s app page does not explain its custody arrangements; do not assume a particular custody model without checking the wallet transaction and contract details. Smart-contract bugs, malicious or incorrectly issued tokens, thin liquidity and price impact can all lead to losses. Before approving a transaction, check the token contract and the amounts shown in your wallet, and avoid granting token allowances you do not understand. Never share a seed phrase or private key with a website. A lack of disclosed audit information is a meaningful caution, not proof that a contract is unsafe.

Is PulseX V2 legit, and who runs it?

PulseX is a real PulseChain exchange project, but public sources are not enough to establish its overall track record or how it is governed. PulseX’s public materials associate the project’s founding with Richard Heart. PulseX has been tracked since June 2023, which indicates activity by that point but does not establish how long the service has operated or how reliably it has performed. The project does not publish team details, licensing information or an audit about it. Those omissions make it harder to judge accountability and security independently. Treat “legit” as separate from “safe”: a working exchange can still involve risky smart contracts, tokens or trades. Check the project’s current contract addresses through trusted PulseChain channels before using them, and do not rely on a lookalike website or an unfamiliar link.

What fees does PulseX V2 charge?

PulseX does not publish a complete fee schedule about the project. A swap on a DEX can involve a pool trading fee and a separate PulseChain network fee (gas) for processing the transaction. The price you receive can also be affected by slippage, the difference between the quoted price and the executed price, especially in a pool with limited liquidity or for a large trade. Check the swap screen and wallet confirmation for the rate, minimum received, network fee and any approval transaction before proceeding. If the app does not show a fee or minimum clearly, do not guess: pause and verify the transaction. The amount paid can vary by token, pool and network conditions, so a general estimate would not be reliable.

How do you use PulseX V2 to swap tokens?

To use PulseX V2, you need a wallet that supports PulseChain and tokens on that network. First, verify the PulseX app address and the token contract addresses through trusted project or PulseChain channels. Connect your wallet only if you are comfortable with the permissions requested. Select the token you want to swap from and the token you want to receive, then check the quoted rate, minimum received and any price-impact warning. Your wallet will show the transaction details and network fee before you approve it. Some swaps may also require a separate token approval transaction. Review each approval carefully, and never enter your seed phrase into the app. If the token, amount or destination shown in the wallet differs from what you expect, reject the transaction and investigate before trying again.

How do PulseX V2 deposits and withdrawals work?

PulseX is a swap service, not a conventional account that accepts bank deposits, so you generally fund your own wallet with PulseChain-compatible assets before trading. The project does not publish deposit or withdrawal limits, nor does it describe a KYC policy about it. A swap sends one token from your wallet and returns another through a blockchain transaction; moving assets off PulseChain or converting them to cash requires a separate wallet, bridge or exchange service, each with its own risks and requirements. Check the receiving network and token address before transferring funds. A transaction sent to the wrong network or address may not be recoverable. Keep enough of the network’s fee token in your wallet to pay for transactions, and confirm the final swap and transfer details in your wallet before signing.

Do you need PLSX to use PulseX V2?

PLSX is associated with PulseX, but the project does not explain whether the token is needed for swaps, what benefits it provides or how its supply is managed. PulseX’s exchange description focuses on swapping PRC20 tokens on PulseChain; it does not establish that buying or holding PLSX is necessary to use the exchange. Before trading PLSX, verify its contract address and check the pool’s liquidity, recent trading activity and the price impact shown in the swap. Token names can be copied, and a token appearing in a wallet or search result does not prove it is official. PLSX and other crypto tokens can be volatile and may be difficult to sell if liquidity is limited. Do not treat a token’s association with an exchange as a guarantee of value or safety.

Before you deposit: a quick checklist

  • Verify the PulseX app and token contract addresses before connecting or swapping.
  • Check the wallet prompt, token allowance, quoted rate and minimum received.
  • Confirm you have enough PulseChain fee tokens for the transaction.
  • Review pool liquidity and price impact before trading.

4 steps

How to get started with PulseX V2

  1. 1

    Verify the PulseX app address and token contract addresses through trusted PulseChain channels.

  2. 2

    Use a PulseChain-compatible wallet and keep enough network fee tokens for transactions.

  3. 3

    Check the selected tokens, pool liquidity, quoted rate and minimum received.

  4. 4

    Review every wallet prompt and reject any transaction or allowance you do not understand.

Plain English

Jargon explained

Smart contract
A blockchain program that can carry out a trade when its conditions are met.
Liquidity pool
A reserve of tokens that traders can swap against.
Gas
The network fee paid to process a blockchain transaction.

Quick answers about PulseX V2

What is the PulseX token?

PulseX V2 is associated with PLSX, but the project does not explain the token’s uses about it. Check official project information and the token contract before trading.

Does PulseX V2 support Ethereum or other chains?

PulseX V2 is described as a PulseChain exchange. Tokens and networks from other chains are not automatically compatible; check the network and token contract before sending funds.

Is app.PulseX.com the official PulseX V2 app?

PulseX’s app page presents links to ways to run PulseX code. Verify you are using the intended app and avoid unfamiliar links or wallet requests.

Compare

PulseX V2 alternatives

All alternatives
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.30B−11.9%Ethereum · Base · Arbitrum +38
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.02B−6.7%Ethereum · Robinhood Chain · Base +19
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $720M−13.4%Ethereum · Base · Polygon +14
PumpSwap logoScore 5.7 out of 10

PumpSwap is a Solana DEX linked to Pump.fun; it may suit experienced traders, but memecoin, liquidity, and audit risks warrant caution.

TVL $251M−10.4%Solana
PancakeSwap AMM V3 logoScore 6.6 out of 10

PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.

TVL $641M−7.5%BNB Chain · Ethereum · Base +8
Project X logoScore 5.2 out of 10

Project X is a Hyperliquid DEX advertising zero-fee swaps, but limited security and fee details call for caution.

TVL $31.5M−7.4%Hyperliquid L1

Same category

More DEXes

DEXes rankings
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2
Stellar DEX logoScore 6.8 out of 10

Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.

TVL $12.7M−4.8%Stellar
Pancakeswap logoScore 6.8 out of 10

PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain
SushiSwap logoScore 6.5 out of 10

SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.

TVL $30.5M−10.8%Ethereum · Polygon · Arbitrum +32
Minswap DEX logoScore 6.5 out of 10

Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.

TVL $12.0M−4.1%Cardano
Pancakeswap Token logoScore 6.5 out of 10

PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain · Ethereum

Same chain

More on Pulse

Pulse rankings
Team Finance logo

Team Finance

Token Locker

Score 5.8 out of 10

Team Finance is a multi-chain token-management toolkit; its non-custodial locks may be useful, but audit and fee details need checking.

TVL $47.5M−14.3%Ethereum · BNB Chain · Base +18
vfat.io logo

vfat.io

Yield Aggregator

Score 5.8 out of 10

vfat.io is a multi-chain yield and portfolio tool with self-custody claims; review its contracts, costs, and strategy risks before using it.

TVL $26.4M−13.6%Base · Ethereum · Hyperliquid L1 +33
LiquidLoans logoScore 5.5 out of 10

Liquid Loans lets users borrow USDL against ETH or PLS, but liquidation and contract risks make it a cautious-use proposition.

TVL $2.00M+9.5%Pulse · Base
DxSale logo

DxSale

Presale

Score 5.4 out of 10

DxSale, now DX App, offers multichain presales and token tools, but unclear fees, team details and audit scope call for caution.

TVL $15.4M−12.3%BNB Chain · Ethereum · Base +16
Bazooka logo

Bazooka

Analytics

Score 5.4 out of 10

Bazooka is a multi-chain coin discovery site; useful for research, but rankings and paid promotions are not proof a token is safe.

Solana · BNB Chain · Ethereum +31
Cryptobuilder logo

Cryptobuilder

Developer Tools

Score 5.4 out of 10

CryptoBuilder is a no-code ERC-20 token creator for EVM chains; it is convenient, but its fees and security credentials need closer scrutiny.

Ethereum · BNB Chain · Polygon +21

Where the answers come from

Sources

  1. defillama.com/protocol/pulsex-v2(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.