PowerSwap Review: Is This EthereumPoW DEX Safe?
PowerSwap is an EthereumPoW decentralised exchange for ERC-20 swaps and token farming. It advertises zero swap fees, but its homepage could not be accessed and key safety details remain unverified.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
PowerSwap may interest experienced EthereumPoW users looking for a DEX with a zero-swap-fee claim, but it is hard to recommend. Its homepage could not be accessed, no audit is listed, and the team and contract details are not published. Gas and slippage can still make trades costly. Verify the app and contracts independently before connecting a wallet, and avoid depositing funds unless the project’s current operation and exit route are clear.
Our verdict:Avoid4.4/10
HelpfulCoin report card
Avoid4.4/ 10 overall
Serious problems, or it no longer works.
- SafetyHow funds are held, audits, licence, incidents.
- F (3.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- D (4.0 out of 10)
- ReputationHow established and openly run it is.
- F (3.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
PowerSwap at a glance
- What it is
- DEX for ERC-20 tokens
- Chain
- EthereumPoW
- Token
- POWER
- Fees
- Advertises zero swap fees
- Audit
- No audit listed
- Value locked
- $18.9K−10.5% 7d
- Last checked
Green flags and red flags
Reassuring
- PowerSwap is identified as an EthereumPoW DEX rather than an unspecified trading service.
- The project’s zero-swap-fee claim is distinguishable from network gas costs.
Be careful about
- PowerSwap’s homepage could not be accessed, so its current app and contracts could not be checked.
- No audit, licence or public team information is provided.
- The zero-swap-fee claim does not cover EthereumPoW gas or possible slippage.
- Low reported POWER trading activity may make trading and exiting positions difficult.
What is PowerSwap and what can you do with it?
PowerSwap is a decentralised exchange (DEX) for ERC-20 tokens on EthereumPoW, a blockchain created after Ethereum’s proof-of-work fork. Its description promotes swaps with zero swap fees and farming, where users may deposit tokens into a pool to earn rewards. The POWER token is associated with the project. This is a narrow product: it is not presented as a general-purpose exchange for many blockchains, and public sources do not establish that it supports assets beyond its EthereumPoW market. The project’s homepage could not be accessed, so its current interface, available token pairs and farming options could not be checked. Treat the zero-fee wording as a claim about the exchange’s swap fee, not a promise that using it costs nothing; the EthereumPoW network can still charge gas. Before connecting a wallet, verify that the app and token contracts are the genuine PowerSwap ones.
Is PowerSwap safe to use?
PowerSwap is difficult to assess as safe because no audit is listed and its homepage could not be accessed. That does not prove the contracts are unsafe, but there is no audit evidence in the project information to reduce the risk. A DEX usually involves interacting with smart contracts from your own wallet; however, PowerSwap’s exact custody arrangements and contract addresses could not be verified. A contract bug, malicious token approval or fake site could put funds at risk. No licence or public security incident information is available in the project details, so neither should be assumed. The reported TVL is modest and has recently fallen sharply; TVL means the value of tokens deposited in a protocol, and it can change quickly. Before use, independently verify the contract addresses, check for a current audit, and avoid approving unlimited token spending. Do not deposit money you cannot afford to lose.
Is PowerSwap legit, and who runs it?
PowerSwap appears to be a real project in the sense that it is identified as an EthereumPoW DEX, and its POWER token has appeared on cryptocurrency tracking pages. That alone does not show that the exchange is actively maintained, trustworthy or easy to use. The project’s homepage could not be accessed, and there is no published team information, launch date, licence or audit in the project details. A tracker records PowerSwap from October 2022, which gives some history, but it is not proof of a strong operating record. Public reporting also show little or no reported POWER trading volume, which makes it harder to judge market activity and whether users can readily trade or exit. Verify that the official app and contracts are still maintained before connecting a wallet. If the project cannot provide working documentation and verifiable contract addresses, it is safer not to use it.
What fees does PowerSwap charge?
PowerSwap advertises zero swap fees, but users should not read that as zero total cost. Blockchain transactions generally require gas, the network fee paid to process a transaction; on EthereumPoW, that fee is separate from any fee charged by the exchange. A swap can also cost money through slippage, which is the difference between the expected and executed price, especially in a shallow market. The project does not publish a complete fee schedule, so fees for adding or removing liquidity, farming, or other actions could not be verified. Providing liquidity can also expose users to impermanent loss, when the value of deposited tokens changes relative to simply holding them. Check the transaction preview in your wallet and the contract’s current terms before signing. If the displayed cost or expected output is unclear, cancel rather than assume the zero-swap-fee claim covers every cost.
How do you use PowerSwap?
If PowerSwap’s app and contracts can be independently verified, the usual DEX process is to use a wallet that supports EthereumPoW, hold ETHW for gas, and connect the wallet to the exchange. You then choose a token pair, review the quoted output and slippage, and approve or sign the transaction. Token approvals let a contract use specified tokens, so grant only the permissions needed and review each wallet prompt. PowerSwap’s current app, supported wallets, token pairs and exact instructions could not be checked, so these are general DEX steps rather than verified PowerSwap directions. Do not follow search ads or use a copied contract address. Confirm the network and official contract addresses through reliable project documentation before connecting. Start with a small test transaction only after checking that the app is genuine; a test does not remove smart-contract or market risks.
How do PowerSwap deposits and withdrawals work?
PowerSwap’s deposit and withdrawal limits, KYC requirements and supported on-ramps are not published in the project details. A DEX commonly does not take a conventional bank deposit: users connect a wallet holding compatible tokens on the supported chain. That is a general pattern, not a verified description of PowerSwap’s current setup. If tokens are placed into a liquidity pool or farm, they may need to be withdrawn through the relevant contract before they are available in the wallet again. The exact PowerSwap withdrawal process and any restrictions could not be verified. Do not send tokens directly to an unverified address or assume that a wallet transfer can be reversed. Before committing funds, check the contract, test the process with a small amount, and confirm that the pool has enough liquidity to make an exit practical. Network gas may apply to both deposits and withdrawals.
Does PowerSwap really have zero transaction fees?
PowerSwap’s zero-fee claim concerns the exchange’s swap fee; it does not remove EthereumPoW gas charges. Every on-chain swap, token approval and liquidity action can require a separate transaction, and network fees can change with demand. The project does not publish a full fee schedule, so users should check the wallet’s transaction preview before signing rather than rely on the headline claim. A low-liquidity pair can also produce a worse execution price through slippage, even where no swap fee is charged. For farming, check the reward token, withdrawal rules and any pool conditions before depositing. PowerSwap’s current pools and terms could not be independently verified, so do not assume a quoted farm return or reward is available or sustainable. The safest cost estimate is the total shown by the wallet plus any clearly disclosed protocol charges, not the swap-fee claim alone.
Before you deposit: a quick checklist
- Verify PowerSwap’s official app and EthereumPoW contract addresses before connecting.
- Check whether a current independent audit exists; none is listed for PowerSwap.
- Keep ETHW in your wallet for gas, even if a swap fee is zero.
- Review token approvals, pool liquidity and the wallet’s transaction preview before signing.
4 steps
How to get started with PowerSwap
- 1
Find and independently verify PowerSwap’s current official app and contract addresses.
- 2
Check for a current audit and confirm the token and pool contracts before connecting.
- 3
Use a wallet configured for EthereumPoW and keep ETHW available for gas.
- 4
Review approvals, liquidity, expected output and transaction costs before signing; start small.
Plain English
Jargon explained
- Gas
- The network fee paid to process an on-chain transaction.
- Liquidity pool
- Tokens deposited into a pool so users can trade between them.
- Slippage
- A price difference that can make a trade execute for less than expected.
Quick answers about PowerSwap
What is the POWER token?
POWER is the token associated with PowerSwap. Its current utility, supply and contract address could not be verified.
Does PowerSwap run on Ethereum?
EthereumPoW is a separate blockchain from Ethereum. Assets and gas tokens on one network do not automatically work on the other.
Which wallets work with PowerSwap?
The project information does not provide a current app address or supported wallet list. Verify both independently before connecting.
Compare
PowerSwap alternatives
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
PumpSwap is a Solana DEX linked to Pump.fun; it may suit experienced traders, but memecoin, liquidity, and audit risks warrant caution.
PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.
Project X is a Hyperliquid DEX advertising zero-fee swaps, but limited security and fee details call for caution.
Same category
More DEXes
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.
PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.
PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.