Skip to content
HelpfulCoin

Poolside Review: Is It Safe to Provide Liquidity?

Poolside is a decentralized exchange for rebasing and yield-bearing tokens, with tools for providing liquidity. Its Reservoir mechanism is designed to preserve token rewards, but contract, token and liquidity risks remain.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

Poolside may suit experienced DeFi users who want to provide liquidity for supported yield-bearing or rebasing tokens. Its specialist design, published documentation and named auditors are positives. But fees, audit coverage and withdrawal terms are not clearly set out in its homepage materials, and the assets and smart contracts still carry meaningful risk. Check the pool and contract details before connecting a wallet, and do not deposit funds you cannot afford to lose.

Our verdict:Use with caution5.2/10

HelpfulCoin report card

Use with caution

5.2/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
D (4.8 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
– (not graded)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
C (5.5 out of 10)
ReputationHow established and openly run it is.
D (4.5 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Poolside at a glance

What it is
AMM for rebasing and yield-bearing tokens
Chains
Base, Ethereum, Avalanche, Arbitrum
Token
None identified
Audits
Statemind and CertiK named
Fees
Not published in project materials
Builder
Buttonwood
Value locked
$26.6K−18.0% 7d
Last checked

Green flags and red flags

Reassuring

  • Poolside publishes a whitepaper and documentation for its AMM.
  • The project names Statemind and CertiK in connection with contract audits.
  • The project’s stated focus and supported asset type are clearly defined.

Be careful about

  • Poolside does not publish a fee schedule or withdrawal limits in its homepage materials.
  • Audit names alone do not show which contract versions or deployments were reviewed.
  • Yield-bearing and rebasing tokens can lose value or face problems beyond Poolside’s control.
  • Public information about the named team and operating history is limited.

What is Poolside and what can you do with it?

Poolside is a decentralized exchange (DEX) built for tokens whose value or token balance can grow over time, such as liquid-staking tokens and lending-protocol tokens. It uses an automated market maker (AMM), a smart-contract system that lets token holders trade or provide liquidity without a traditional exchange operator. Poolside’s distinctive feature is its “Reservoirs” mechanism, which it says is designed to help liquidity providers avoid losing staking rewards and yield when supplying these assets. It also supports single-sided liquidity, so a provider can deposit one asset into certain pools rather than supplying both sides. Poolside lists deployments on Base, Ethereum, Avalanche and Arbitrum. Its site focuses on liquidity provision; check the app to see which pools and functions are currently available on your chosen chain.

Is Poolside safe to use for liquidity provision?

Poolside’s smart contracts carry the usual risks of a DeFi exchange: bugs, exploits, faulty integrations and losses caused by a pool or its underlying tokens. The project says its contracts were peer-reviewed and audited by Statemind and CertiK, and two audits are recorded in its security information. That is a positive signal, but an audit is not a guarantee of safety. Before depositing, read the audit reports and check which contract versions and chains they cover; Poolside does not publish enough detail on its homepage to assess that coverage. Poolside is non-custodial in the usual wallet-based DEX model: you authorize transactions from your own wallet rather than handing funds to a broker. This does not remove contract risk. No licence or insurance is stated, and there is not enough incident information to conclude that the protocol has never had a security issue. Treat any deposit as money you could lose.

Is Poolside legit, and who is behind it?

Poolside appears to be a real DeFi project: it has a live product, documentation and a whitepaper, and its site identifies Buttonwood as its builder. Its public materials describe a specific use case—liquidity for rebasing and value-accruing assets—and name Statemind and CertiK in connection with contract reviews. The project does not publish named founders or a detailed operating-company profile on its homepage, so it is harder to assess who is accountable. The project has no token listed in the supplied classification. Its deployment has been tracked since October 2023, but that date alone does not establish how continuously the product has operated or its long-term record. Overall, Poolside has more substance than an anonymous pool with no documentation, but the limited public information about its team, operating history and security coverage calls for caution. Verify the current contracts and pool activity before connecting a wallet.

What fees does Poolside charge?

Poolside does not publish its trading or liquidity-provider fee schedule in the project information described here, so you should check the app and pool details before making a transaction. The total cost can include a pool fee, network gas and, for trades, price impact or slippage—the difference between the expected and executed price. Gas is paid in the relevant chain’s native asset, not to Poolside as a platform charge. Liquidity provision can also have an economic cost if the value or price of deposited assets changes relative to each other; Poolside’s Reservoirs are intended to address reward divergence for supported assets, but that is not a promise that every form of loss is eliminated. Check whether a pool has any incentives, what conditions apply, and whether those incentives compensate for the risks. Do not assume that a zero or low displayed fee means the transaction is cost-free.

How does Poolside work, and how do you add liquidity?

Poolside uses an AMM with “Reservoirs,” which the project describes as a way to separate staking rewards or other yield from the liquidity-provider position and reduce divergence loss for supported assets. In plain terms, the mechanism is intended to let a pool provide liquidity without making its providers give up the yield those tokens accrue. Poolside also says certain pairs allow one-sided deposits. To start, connect a wallet that supports the relevant network, choose a pool and review its assets, contract details and terms in the app. Check the token approval and transaction before signing; approvals can authorize a contract to use tokens. Then add liquidity only after confirming the amount, network and expected costs. Poolside’s exact Reservoir accounting and pool-specific parameters should be checked in its documentation. The mechanism is not a guarantee against contract failure, token depegging or every kind of impermanent loss.

How do Poolside deposits and withdrawals work?

Poolside is used through a crypto wallet, rather than by depositing cash into a custodial account. You need the relevant tokens on the same supported network as the pool, plus that chain’s native token to pay gas. Moving funds from another network may require a separate bridge, which has its own costs and risks; do not assume Poolside provides that service. To withdraw liquidity, use the app’s withdrawal or removal function for the position and approve the resulting wallet transaction. The tokens should return to your wallet on the pool’s network, subject to the pool’s available liquidity and contract rules. Poolside does not publish withdrawal limits, processing times or a KYC policy in its homepage materials. Wallet transactions can be delayed by network congestion, and a withdrawal is not the same as converting assets to cash. Check the destination chain and asset amounts carefully before confirming.

What are the main risks of using Poolside?

Poolside is designed for liquidity providers holding yield-bearing or rebasing assets, but those assets can introduce risks beyond ordinary token pairs. A rebasing token may change its displayed balance, while a liquid-staking token can trade below the value of the underlying staked asset or face problems with its staking protocol. Poolside’s mechanism is intended to protect the yield component in supported pools; it cannot prevent every market, token, validator or smart-contract failure. Pool liquidity also matters: a position may be harder or more costly to exit if a pool is shallow or conditions change. Check the exact assets, pool depth and contract address on the correct chain, and understand how the Reservoir works for that pair before depositing. Poolside does not publish a general guarantee of returns. Avoid relying on projected incentives or yield as certain income, and consider testing the transaction flow with a small amount first.

Before you deposit: a quick checklist

  • Confirm the Poolside app, network and contract address before connecting your wallet.
  • Read the Statemind and CertiK audit reports and verify which contracts and chains they cover.
  • Check the pool’s fee, liquidity, supported tokens and withdrawal conditions in the app.
  • Keep enough of the network’s native token for gas, and review every token approval before signing.

5 steps

How to get started with Poolside

  1. 1

    Open Poolside’s official app and verify its domain and the network you intend to use.

  2. 2

    Read the documentation and audit reports; confirm that the pool’s contracts are covered.

  3. 3

    Check the specific pool’s assets, liquidity, fees and withdrawal conditions.

  4. 4

    Connect a wallet with the right network and enough native tokens for gas.

  5. 5

    Review approvals and transaction details, then start only with an amount you can afford to risk.

Plain English

Jargon explained

Liquid-staking token (LST)
A token designed to represent staked assets while remaining usable in other crypto applications.
Rebasing token
A token whose balance or value changes over time, often as rewards accrue.
AMM
A smart-contract exchange that prices trades using a pool of deposited tokens.
Impermanent loss
The risk that a liquidity position changes in value compared with simply holding its tokens.

Quick answers about Poolside

Does Poolside have a token?

No token is identified for Poolside. Be cautious of tokens using the Poolside name unless the project itself verifies them.

Which networks does Poolside support?

Poolside lists Base, Ethereum, Avalanche and Arbitrum. Check the app for current pools on each network before transferring assets.

Does Poolside require KYC?

Poolside’s materials do not state a KYC policy. Using a wallet-based DeFi app does not itself mean that every activity or jurisdiction has the same requirements.

Compare

Poolside alternatives

All alternatives
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.29B−13.4%Ethereum · Base · Arbitrum +38
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.05B−10.1%Ethereum · Robinhood Chain · Base +19
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $719M−16.7%Ethereum · Base · Polygon +14
PancakeSwap AMM V3 logoScore 6.6 out of 10

PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.

TVL $643M−4.3%BNB Chain · Ethereum · Base +8
Fluid DEX logoScore 5.8 out of 10

Fluid DEX is an on-chain swap and liquidity protocol on five networks; it merits a look with careful checks on contracts, fees and risk.

TVL $198M−5.5%Ethereum · Arbitrum · Base +2
PancakeSwap Infinity logoScore 5.8 out of 10

PancakeSwap Infinity is a multichain DEX with multiple pool types; it merits a look, but check fees and contract risks first.

TVL $66.6M−6.0%BNB Chain · Base · Robinhood Chain +1

Same category

More DEXes

DEXes rankings
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2
Stellar DEX logoScore 6.8 out of 10

Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.

TVL $12.8M−4.0%Stellar
Pancakeswap logoScore 6.8 out of 10

PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain
SushiSwap logoScore 6.5 out of 10

SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.

TVL $30.5M−11.1%Ethereum · Polygon · Arbitrum +32
Minswap DEX logoScore 6.5 out of 10

Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.

TVL $11.9M−4.4%Cardano
Pancakeswap Token logoScore 6.5 out of 10

PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain · Ethereum

Same chain

More on Base

Base rankings
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.1B−9.2%Ethereum · Base · Arbitrum +18
Bitvavo logo

Bitvavo

Centralized Exchanges

Score 6.9 out of 10

Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.

TVL $329M+7.8%Ethereum · Bitcoin · Solana +9
Compound V3 logoScore 6.8 out of 10

Compound V3 is a multi-chain crypto lending protocol with variable rates; its security measures help, but lending and borrowing carry real risks.

TVL $1.08B−11.7%Ethereum · Arbitrum · Base +7
Harvest Finance logo

Harvest Finance

Yield Aggregator

Score 6.8 out of 10

Harvest Finance is a DeFi yield comparison index; useful for research, but each underlying strategy needs separate risk checks.

TVL $14.2M−16.9%Base · Ethereum · Arbitrum +2
Across logo

Across

Cross Chain Bridge

Score 6.8 out of 10

Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.

TVL $13.4M−11.3%Ethereum · Arbitrum · Optimism +19
Sablier Lockup logoScore 6.8 out of 10

Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.

TVL $1.54M−10.7%Ethereum · Polygon · Arbitrum +25

Where the answers come from

Sources

  1. defillama.com/protocol/poolside(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.