Is MerlinSwap Safe? A 2026 Review of the Merlin DEX
MerlinSwap is an AMM decentralised exchange for swapping tokens on the Merlin chain. Its purpose is clear, but fees, team details and an audit are not published in its project description.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
MerlinSwap may suit experienced users who already hold tokens on the Merlin chain and understand wallet-based DEX risks. Its role as an AMM is clear, but specific fees, team details and an audit are not published in its project description. With no reported audit, verify contracts carefully and begin with a small amount; avoid treating MP or pool participation as low-risk.
Our verdict:Use with caution4.8/10
HelpfulCoin report card
Use with caution4.8/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- F (3.5 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- C (5.5 out of 10)
- ReputationHow established and openly run it is.
- D (4.5 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
MerlinSwap at a glance
- What it is
- AMM decentralised exchange
- Chain
- Merlin
- Token
- MP
- Tracked since
- February 2024
- Audit
- No audit reported
- Value locked
- $7.35M+21.3% 7d
- Last checked
Green flags and red flags
Reassuring
- MerlinSwap clearly identifies itself as an AMM DEX for the Merlin chain.
- The project has been tracked since February 2024, giving it a history beyond a newly launched page.
Be careful about
- No smart-contract audit is reported for MerlinSwap.
- MerlinSwap does not publish specific swap fees in its project description.
- Team details, a regulatory licence, and a security incident history are not described.
What is MerlinSwap and what can you do with it?
MerlinSwap is an automated market maker (AMM) decentralised exchange for trading tokens on the Merlin chain. Instead of matching buyers and sellers through a conventional order book, an AMM uses token pools and smart contracts to process swaps. MerlinSwap describes itself as a DEX for the Merlin ecosystem, and MP is its associated token. You can use the exchange to swap supported tokens; AMM platforms may also let users add funds to pools, but MerlinSwap does not publish enough detail to confirm which pool features are available or their terms. The service is designed for on-chain use, so you need a compatible wallet and assets on Merlin rather than a conventional exchange account. Its focus is narrow: MerlinSwap is not a general-purpose exchange across every blockchain. Check that the tokens and network shown in your wallet match the ones you intend to trade before approving a transaction.
Is MerlinSwap safe to connect a wallet to?
MerlinSwap has material smart-contract risk, and no smart-contract audit is reported for it. As an AMM DEX, it is generally used by connecting a wallet and signing on-chain transactions, rather than handing funds to a custodial exchange. That does not make it risk-free: a vulnerable contract, a malicious token, or a mistaken approval can still result in losses. If you add tokens to a pool, those assets are exposed to the pool contract and may also face impermanent loss, meaning their value can differ from simply holding the tokens. MerlinSwap does not state a regulatory licence in its project materials. There is also no incident history or security process described in the information presented about the project, so a clean track record cannot be assumed. Treat funds placed in contracts as money at risk, check token and contract details independently, and avoid approving an amount you cannot afford to lose.
Is MerlinSwap legit, and who runs it?
MerlinSwap appears to be a real, active DEX for the Merlin chain, but the public details do not establish who runs it or how strong its track record is. Records track the project from February 2024, and its stated purpose is specific: providing an AMM exchange for the Merlin ecosystem. MP is associated with the project, but its role, governance rights, and token economics are not explained in the project description. MerlinSwap does not publish team details or a regulatory licence in the information presented about the project, and no audit is reported. Those gaps make it difficult to assess accountability or independent security review. A project’s presence on a blockchain does not by itself prove that its contracts or token are safe. Before using MerlinSwap, verify the app and contract addresses through trusted channels, review any current documentation, and start with a small transaction rather than relying on the project’s age or token presence as proof of legitimacy.
What fees does MerlinSwap charge for swaps?
MerlinSwap’s specific swap fees and liquidity-pool charges are not published in its project description. As with other DEXs, you should expect a network transaction fee for an on-chain swap, and the quoted exchange rate may include a pool fee or be affected by slippage. Slippage is the difference between the price you expect and the price you receive when a trade executes. The actual cost can therefore depend on the token pair, pool liquidity, trade size, and network conditions. Check the transaction preview and any fee or price-impact details shown by the app before signing; do not assume that a displayed token price is the final execution price. If a fee is not shown clearly, pause rather than approving blindly. Costs for adding or removing liquidity may differ from swap costs, and MerlinSwap does not publish enough information to give a reliable figure for those actions. Network fees are separate from any DEX fee.
How do you use MerlinSwap to swap tokens?
To use MerlinSwap, open the genuine app, connect a wallet that supports the Merlin chain, and make sure the wallet is set to that network. Select the tokens and amount for a swap, then check the quoted rate, estimated output, and any fee or price-impact warning before signing. A token approval may be required before the first swap; approvals let a contract use the specified token, so review the amount and contract carefully. The transaction is completed on-chain, and you should confirm it in your wallet rather than trusting an unfamiliar pop-up or message. MerlinSwap does not publish a detailed beginner guide in the project description, so exact interface steps and supported wallets may change. Do not follow links sent by strangers or share a seed phrase: a legitimate DEX does not need it. Start with a small trade and confirm that the received asset appears in the wallet before committing more funds.
How do MerlinSwap deposits and withdrawals work?
MerlinSwap is a wallet-based DEX, not a bank account with fiat deposit and withdrawal rails. To trade, you need the relevant tokens on the Merlin chain in a compatible wallet; moving assets from another network may require a separate bridge, and MerlinSwap does not publish bridge instructions or supported routes in its project description. After a swap, tokens normally return to the connected wallet through the on-chain transaction. If you provide liquidity, withdrawing means using the pool’s contract to redeem your share, subject to the pool’s rules and available liquidity. MerlinSwap does not publish withdrawal limits or processing times, and an on-chain transaction can remain pending or fail depending on network conditions. No account-based KYC process is described, but that should not be taken as a guarantee about every interface or jurisdiction. Check local rules and verify the network and destination address before moving funds; transfers to the wrong network or address may not be recoverable.
What is the MP token used for on MerlinSwap?
MP is MerlinSwap’s associated token, but its specific utility and economic terms are not explained in the project description. The token’s name alone does not show whether it grants governance rights, provides fee discounts, or represents a claim on revenue; do not assume any of those benefits without current documentation. The public description also does not set out token supply, distribution, unlock schedules, or the risks of holding MP. Public reporting have mentioned an esMP token, but the details available do not establish its terms or how it relates to MP, so those claims should be checked against current official documentation before relying on them. MP is separate from the tokens used in an individual swap, and owning it is not necessary to infer that a trade will be cheaper or safer. Treat MP as a crypto asset that can lose value, and check its contract address and trading liquidity before interacting with it.
Before you deposit: a quick checklist
- Verify the official MerlinSwap app and token contract addresses before connecting or swapping.
- Check that your wallet is on the Merlin chain and that the selected tokens are on that network.
- Review each token approval, swap quote, price impact, and network fee before signing.
- Start with a small transaction; no smart-contract audit is reported for MerlinSwap.
4 steps
How to get started with MerlinSwap
- 1
Find MerlinSwap through a trusted channel and verify the app and contract addresses before connecting.
- 2
Set your wallet to the Merlin chain and check that it holds the intended tokens.
- 3
Select a small swap, then review the output, price impact, fee and any token approval.
- 4
Sign only if the details match your intent, then confirm the transaction and received tokens in your wallet.
Plain English
Jargon explained
- AMM
- An exchange model that uses token pools and smart contracts to process trades instead of matching orders.
- Liquidity pool
- A smart-contract pool that holds tokens so users can swap between them.
- Slippage
- The difference between the expected trade price and the price a swap actually gets.
Quick answers about MerlinSwap
Which wallets work with MerlinSwap?
MerlinSwap’s project description does not specify which wallets it supports. Check wallet compatibility with the Merlin chain before connecting, and never share a seed phrase.
Can you stake MP on MerlinSwap?
MerlinSwap does not publish staking terms or a staking programme in its project description. Do not treat holding MP as earning a return unless current official terms explain the conditions and risks.
Can you cancel a pending MerlinSwap transaction?
A transaction that has already been broadcast may not be cancellable; options depend on the wallet and network. Check the transaction status in your wallet, and avoid signing a second transaction unless you understand what it will do.
Compare
MerlinSwap alternatives
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
PumpSwap is a Solana DEX linked to Pump.fun; it may suit experienced traders, but memecoin, liquidity, and audit risks warrant caution.
PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.
Project X is a Hyperliquid DEX advertising zero-fee swaps, but limited security and fee details call for caution.
Same category
More DEXes
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.
PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.
PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
Same chain
More on Merlin
Gate is a long-running centralized exchange with extensive crypto markets, but custody and proof-of-reserves limitations merit caution.
Symbiosis is a cross-chain swap and bridge protocol; its non-custodial design is useful, but route and contract risks remain.
Solv Basis Trading offers Bitcoin-focused yield strategies, but fees, withdrawal terms and audit scope need careful checking.
Avalon Finance is a multi-chain Bitcoin-focused lending protocol; its lending and custody risks and unpublished terms call for care.
zkLink Nova is an Ethereum-compatible Layer 3 for connected DeFi apps; it is worth exploring cautiously, but key security and fee details need checking.
Solv issues Bitcoin-linked tokens for DeFi use; it may suit experienced users, but verify reserves, fees and redemption risks first.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.