Skip to content
HelpfulCoin

Maverick V2 Review: Is It Safe to Swap or Add Liquidity?

Maverick V2 is a multi-chain decentralised exchange for token swaps and liquidity pools. It supports six networks, but published audit and fee details are limited.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

Maverick V2 may suit people already comfortable with wallet-based DeFi who want to swap tokens or provide liquidity across several networks. Its app offers a clear set of core tools, but Maverick does not publish a complete fee schedule, team details or audit information. That leaves important questions about cost and contract risk unanswered, so verify the pool and start small rather than treating it as a low-risk place to hold funds.

Our verdict:Use with caution5.2/10

HelpfulCoin report card

Use with caution

5.2/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
D (4.5 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
D (5.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
C (6.0 out of 10)
ReputationHow established and openly run it is.
D (5.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Maverick V2 at a glance

Type
Decentralised exchange and AMM
Networks
Ethereum, Base, zkSync Era, Arbitrum, BNB Chain, Scroll
Token
MAV
Audit data
No audits listed
Tools
Swaps, pools, liquidity, portfolio, voting
Value locked
$642K−20.6% 7d
Last checked

Green flags and red flags

Reassuring

  • The app provides distinct tools for swaps, liquidity, portfolios and voting.
  • Maverick supports six named networks rather than presenting itself as a single-chain DEX.

Be careful about

  • No audits are listed for Maverick, so smart-contract security is difficult to assess.
  • Maverick does not publish a complete fee schedule, team details or licensing information.
  • Liquidity providers face token-price and pool risks, in addition to transaction fees.

What is Maverick V2 and what can you do with it?

Maverick V2 is a decentralised exchange (DEX) built around an automated market maker (AMM), a system that uses liquidity pools to facilitate token swaps. Its app offers swaps, pool creation, liquidity provision, portfolio tools and voting. The protocol is described as focusing on capital efficiency and giving liquidity providers more control over how liquidity is used. It supports Ethereum, Base, zkSync Era, Arbitrum, BNB Chain and Scroll. You connect a compatible crypto wallet to interact with the app; Maverick is not presented as a conventional exchange account. The MAV token is associated with the protocol, but the exact token rights and the differences between Maverick V2 and earlier versions should be checked in the current documentation before taking action.

Is Maverick V2 safe to use?

Maverick V2’s exchange model is designed for wallet-based DeFi use, but that alone does not make it safe. No audits are listed for the protocol, and Maverick does not publish audit details about its product. That is a meaningful gap: smart-contract bugs can put deposited liquidity at risk, and wallet transactions are generally difficult to reverse. No security incident information or licence details are published either. Before swapping or adding liquidity, check the current documentation for contract addresses and security reviews, confirm the network and pool, and consider starting with a small amount. Never share your wallet recovery phrase or approve a transaction you do not understand. Treat liquidity provision as riskier than a simple swap because token prices can move while funds are in a pool.

Is Maverick V2 legit, and who runs it?

Maverick appears to be an active DeFi protocol, with an official product site and an app that supports swaps, liquidity tools and voting. Its MAV token and multi-chain deployment give it a discernible product rather than an anonymous, one-page offer. However, Maverick does not publish enough information about its operating team, founding date, licensing or security record to make a strong judgement about who is accountable or how long the project has operated. A protocol’s presence across several networks is not proof of legitimacy or safety. Check that you are using Maverick’s official app and the correct network, and verify token and contract addresses against its documentation. The limited public information on team and audits means users should keep their exposure modest unless they can independently verify the details they need.

What fees does Maverick V2 charge?

Maverick does not publish a complete fee schedule in the product information described here. As with other AMM DEXs, a swap may involve a pool trading fee and a network transaction fee, often called gas; both can vary by pool and blockchain. The exact pool fee and gas estimate should be visible or available to check before confirming a transaction in the app and your wallet. Providing liquidity is not automatically free of cost: you pay gas to add or remove funds, and your position can lose value relative to simply holding the tokens if prices change. Incentives, if offered for a pool, may also affect returns and carry their own conditions. Compare the displayed fees and expected position details before approving anything; do not assume the same costs apply across all six supported networks.

How do you use Maverick V2?

To use Maverick V2, open the official Maverick app, connect a compatible wallet, and select the correct network. For a swap, choose the tokens and amount, inspect the quoted exchange and any pool fee, then review and approve the transaction in your wallet. To provide liquidity, select an existing pool or use the pool-creation option, then review what tokens and position settings it requires before confirming. Maverick also offers portfolio and voting tools. Wallet transactions require network gas, so you need the relevant network’s native token for fees. A connected wallet does not mean Maverick has your recovery phrase; never share it. Confirm the app and contract addresses through Maverick’s documentation, and test with a small amount before committing more.

How do Maverick V2 deposits and withdrawals work, and is KYC required?

Maverick V2 uses wallet transactions rather than a conventional exchange balance: you connect a wallet and approve swaps or liquidity transactions yourself. To put funds into a pool, you need the pool’s required tokens on its supported network, plus that network’s native token to pay gas. To get liquidity back, use the app’s pool or portfolio tools to remove it; the resulting tokens go to your wallet through an on-chain transaction. Maverick does not publish withdrawal limits or processing times, and blockchain fees and congestion can vary. No specific KYC requirements are published for using the DEX, but that is not a guarantee about every service or jurisdiction. Check local rules, use the correct network, and remember that removing liquidity does not guarantee you receive the same token value you deposited.

Which networks does Maverick V2 support?

Maverick supports Ethereum, Base, zkSync Era, Arbitrum, BNB Chain and Scroll, but each pool and token may not be available on every network. Select the network in your wallet and the app, then verify that the token and pool are on that same chain before swapping or providing liquidity. Sending a token to an address on the wrong network can make recovery difficult or impossible. The app’s pool selector and documentation are the places to check current availability; do not assume a token with the same name on another chain is the same asset. Maverick’s interface also includes pool creation and incentive-management tools, but their terms and any rewards can differ by pool. Review the specific pool before committing funds.

Before you deposit: a quick checklist

  • Verify the official Maverick app and contract addresses before connecting your wallet.
  • Check that your wallet and the selected pool are on the same supported network.
  • Review the pool fee, gas cost, token requirements and liquidity risks before approving.
  • Look for current independent audit details; none are listed for Maverick in the project information.

4 steps

How to get started with Maverick V2

  1. 1

    Open Maverick’s official app and check its address against the project’s documentation.

  2. 2

    Connect a wallet and select the same supported network as the token or pool you plan to use.

  3. 3

    Review the pool, token addresses, fees and transaction details before approving.

  4. 4

    Try a small swap or liquidity position first, and keep enough native network tokens for gas.

Plain English

Jargon explained

Liquidity pool
A pool of tokens that a decentralised exchange uses to enable trades.
Gas
The network fee paid to process a transaction on a blockchain.
AMM
A decentralised exchange that uses pools and code to facilitate trades.

Quick answers about Maverick V2

Does Maverick V2 have a portfolio tool?

Yes. Maverick’s app includes a portfolio section for viewing positions. What it displays can depend on the connected wallet and selected network.

Can you create a liquidity pool on Maverick V2?

The app includes an option to create a pool. Check the token requirements, settings and transaction costs before confirming a new pool.

Can liquidity pools on Maverick V2 have incentives?

Maverick’s interface includes tools to manage incentives. Check the terms for the specific pool; do not assume rewards are available or guaranteed.

Compare

Maverick V2 alternatives

All alternatives
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.29B−13.4%Ethereum · Base · Arbitrum +38
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.05B−10.1%Ethereum · Robinhood Chain · Base +19
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $719M−16.7%Ethereum · Base · Polygon +14
PancakeSwap AMM V3 logoScore 6.6 out of 10

PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.

TVL $643M−4.3%BNB Chain · Ethereum · Base +8
Fluid DEX logoScore 5.8 out of 10

Fluid DEX is an on-chain swap and liquidity protocol on five networks; it merits a look with careful checks on contracts, fees and risk.

TVL $198M−5.5%Ethereum · Arbitrum · Base +2
PancakeSwap Infinity logoScore 5.8 out of 10

PancakeSwap Infinity is a multichain DEX with multiple pool types; it merits a look, but check fees and contract risks first.

TVL $66.6M−6.0%BNB Chain · Base · Robinhood Chain +1

Same category

More DEXes

DEXes rankings
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2
Stellar DEX logoScore 6.8 out of 10

Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.

TVL $12.8M−4.0%Stellar
Pancakeswap logoScore 6.8 out of 10

PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain
SushiSwap logoScore 6.5 out of 10

SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.

TVL $30.5M−11.1%Ethereum · Polygon · Arbitrum +32
Minswap DEX logoScore 6.5 out of 10

Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.

TVL $11.9M−4.4%Cardano
Pancakeswap Token logoScore 6.5 out of 10

PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain · Ethereum

Same chain

More on Ethereum

Ethereum rankings
Lido logo

Lido

Staking Pool

Score 7.1 out of 10

Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.

TVL $17.8B−14.9%Ethereum · Solana · Terra +2
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.1B−9.2%Ethereum · Base · Arbitrum +18
Ethereum Finance logoScore 7.1 out of 10

Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.

Ethereum
Getblock logo

Getblock

Infrastructure

Score 7.0 out of 10

GetBlock sells blockchain nodes and data APIs for developers; its free tier is worth testing, but check usage costs and service terms.

Bitcoin · XRP Ledger · Ethereum +3
Score 7.0 out of 10

ENS maps readable names to Ethereum addresses; it is a long-running protocol, but wallet and smart-contract risks remain.

Ethereum
Bitvavo logo

Bitvavo

Centralized Exchanges

Score 6.9 out of 10

Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.

TVL $329M+7.8%Ethereum · Bitcoin · Solana +9

Where the answers come from

Sources

  1. defillama.com/protocol/maverick-v2(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.