Kodiak V3 Review: Is It Safe to Use on Berachain?
Kodiak V3 is a Berachain decentralized exchange for token swaps and liquidity provision, built as a Uniswap V3 fork. It has two audits listed, but important details about the audits, team, fees and compliance are not published in the project details reviewed.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Kodiak V3 may suit people already using Berachain who want to swap tokens or provide liquidity through a DEX. Its non-custodial model and two listed audits are positive signals, but the audit details, team, fees and licence are not published in the reviewed details. Smart-contract, token-price and liquidity risks remain, so check the contracts and start cautiously.
Our verdict:Use with caution5.5/10
HelpfulCoin report card
Use with caution5.5/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (5.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- C (6.0 out of 10)
- ReputationHow established and openly run it is.
- D (5.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Kodiak V3 at a glance
- Category
- DEXes
- Product
- Decentralized exchange
- Chain
- Berachain
- Model
- Uniswap V3 fork
- Token
- KDK
- Audits
- 2 listed
- Tracked since
- 2025-02-06
- Value locked
- $11.8M−20.4% 7d
- Last checked
Green flags and red flags
Reassuring
- Kodiak V3 is specifically identified as a Berachain Uniswap V3 fork.
- Two audits are listed for Kodiak V3.
- Kodiak publishes a V3 SDK for developers building on the exchange.
Be careful about
- Kodiak does not publish exact swap fees or a complete fee schedule in the reviewed details.
- The audit providers, report dates and findings are not identified in the reviewed details.
- The team, licence and KYC policy are not published in the reviewed details.
- Liquidity providers can lose value through price movements and impermanent loss.
What is Kodiak V3 and what can you do with it?
Kodiak V3 is a decentralized exchange (DEX) for swapping tokens and providing liquidity on Berachain. Its core trading system is described as a Uniswap V3 fork, which means liquidity providers can supply assets to token pools and traders swap through those pools using smart contracts. You connect a compatible crypto wallet rather than opening a conventional exchange account. Kodiak’s interface is for Berachain; assets on another network generally need to be bridged before they can be used, and bridging brings separate risks and costs. Kodiak also has a token called KDK, but its exact role and any associated benefits should be checked in the project’s current documentation. A DEX does not guarantee a buyer or seller at a particular price: available pool liquidity, trading fees and price impact affect each swap. It is best understood as a Berachain trading and liquidity tool, not a bank or a guaranteed-yield product.
Is Kodiak V3 safe to use?
Kodiak V3 has some safety signals, but public sources are not enough to call it low-risk. The exchange is non-custodial in the usual DEX sense: you connect your own wallet and trades interact with smart contracts, rather than depositing funds into a conventional exchange account. However, tokens committed to a liquidity pool are exposed to the contracts and the pool’s market risks. Two audits are listed for Kodiak V3, but their names, scope, dates and findings are not available in the project details reviewed for this answer. An audit is not a guarantee that a contract is free of bugs or that every part of the app has been checked. No licence or regulatory status is published about Kodiak. A wallet connection or token approval can also expose you to loss if you approve the wrong contract or sign a malicious transaction. Check the audit reports and contract addresses before using the app, and only risk funds you can afford to lose.
Is Kodiak V3 legitimate, and who runs it?
Kodiak V3 appears to be an operating Berachain DEX, but the public details do not establish who runs it or provide a full record of its track record. Its app is described as offering swaps and liquidity provision, and its V3 SDK is available for developers building on Kodiak. It has been tracked since February 2025, which shows a public presence by that point but does not prove when it launched or how it has handled past incidents. Two audits are listed, though the audit firms and reports are not identified. Kodiak does not publish a team identity, company information or licence. Those gaps make it harder to independently assess accountability if something goes wrong. Treat the project as a real, active protocol rather than as a regulated exchange, and verify its official app and contract addresses before connecting a wallet. Do not rely on token prices or trading-volume listings as proof of safety.
What fees does Kodiak V3 charge?
Using Kodiak V3 can involve three costs: the pool’s swap fee, Berachain network gas and price impact. The swap fee is paid through the pool and can vary by pool; price impact is the effect a trade has on the price when liquidity is limited. Gas is the network charge for processing the transaction. Kodiak does not publish a single fee schedule or exact fee rates for this answer, so check the quote and transaction confirmation in the app before swapping. Providing or removing liquidity may also require on-chain transactions and gas. If you move assets from another network, a bridge may charge fees as well, and the transfer introduces separate contract and network risks. The total cost can therefore depend on the token pair, trade size, pool, network conditions and any bridge used. Compare the amount you expect to receive with the amount shown before signing; a displayed quote is not a guarantee that the final execution price will be identical.
How do you use Kodiak V3 to swap or provide liquidity?
To start, use Kodiak’s official app and connect a wallet that supports Berachain. Make sure the wallet is on the Berachain network and holds the tokens you intend to trade, plus the network’s gas token for transactions. For a swap, choose the input and output assets, review the quoted amount, fee and price impact, then check the wallet transaction details before signing. A liquidity provider instead selects a pool and commits tokens to it; V3-style pools can involve choosing a price range, which affects when the liquidity is active and how it earns fees. Supplying liquidity is not a deposit account and does not promise a return. Token prices can move, and liquidity positions can lose value compared with simply holding the assets. Only approve the specific contract and spending amount needed, and never share a wallet recovery phrase. Start with a small transaction if you are unfamiliar with Berachain or Kodiak, and make sure you understand how to remove liquidity before adding funds.
How do you withdraw funds from Kodiak V3, and are there limits?
Kodiak V3 does not work like a centralized exchange with a cash balance and a standard withdrawal request. Swapped tokens are sent to your connected wallet through an on-chain transaction; liquidity providers first remove their position from a pool, after which the returned tokens go to their wallet. You will need Berachain network gas to complete transactions, and any wallet or bridge transfer has its own steps and costs. Kodiak does not publish withdrawal limits or processing times for this answer; on-chain transactions depend on network processing and the transaction being correctly submitted. The project’s KYC policy is not published, so do not assume that using the app is exempt from every legal or compliance requirement. If funds are on another network, moving them to or from Berachain may require a separate bridge, which is not the same as a Kodiak withdrawal. Check the destination network and address carefully before sending tokens, since an incorrect transfer may be difficult or impossible to reverse.
Can you earn money by providing liquidity on Kodiak V3?
Providing liquidity on Kodiak V3 can earn a share of pool trading fees, but it does not guarantee profit. A V3-style position may be active only within the price range selected by the provider; if the market price moves outside that range, the position may stop earning fees until it is adjusted. Pool fees can also be outweighed by losses from token price movements, commonly called impermanent loss. This is the difference between the value of a liquidity position and what the same tokens might have been worth if held separately. Kodiak does not publish a guaranteed yield, and returns depend on actual trading activity, pool fees and market movement. Before adding liquidity, check the pool’s tokens, current liquidity, fee setting and the range controls in the app. Avoid treating a displayed past return or fee rate as a promise of future earnings. KDK is Kodiak’s token, but its precise utility and any incentives should be verified in current project documentation rather than assumed.
Before you deposit: a quick checklist
- Verify the Kodiak app and Berachain contract addresses before connecting your wallet.
- Read the two audit reports and check which contracts and versions they cover.
- Check the swap quote, pool fee, price impact and gas before signing.
- For liquidity, understand the selected price range and the risk of impermanent loss.
- Confirm the network and destination address before sending or bridging tokens.
5 steps
How to get started with Kodiak V3
- 1
Open Kodiak’s official app and verify the app address before connecting a wallet.
- 2
Switch your wallet to Berachain and keep enough network gas for transactions.
- 3
For a swap, check the token pair, quote, pool fee and price impact before signing.
- 4
For liquidity, review the pool and price-range settings and understand impermanent loss before adding tokens.
- 5
Confirm transactions and destination addresses carefully; test with a small amount if you are new to the app.
Plain English
Jargon explained
- Liquidity pool
- A pool where users supply tokens so traders can swap between them.
- Impermanent loss
- The difference between a liquidity position’s value and holding its tokens separately.
- Gas
- The network charge for processing a transaction.
Quick answers about Kodiak V3
Does Kodiak V3 work on Ethereum?
Kodiak V3 is for Berachain. Assets on other networks generally need to be bridged before use, which adds cost and separate risk.
What is the KDK token?
KDK is Kodiak’s token. The project details reviewed do not explain its precise utility, so check Kodiak’s current documentation before assuming what holding it provides.
Is Kodiak V3 regulated?
Check whether online crypto trading and use of decentralized exchanges are permitted where you live. Kodiak does not publish a licence in the project details reviewed, so do not treat it as a regulated exchange.
Compare
Kodiak V3 alternatives
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
BEX is Berachain’s decentralized exchange, available through BeraHub; it is worth a look for experienced users, but audits and fees are unclear.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
WOOFi Swap is a multi-chain decentralized exchange; it may be useful, but check fees, audits and cross-chain risks before trading.
PumpSwap is a Solana DEX linked to Pump.fun; it may suit experienced traders, but memecoin, liquidity, and audit risks warrant caution.
Same category
More DEXes
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.
PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.
Same chain
More on Berachain
Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.
Chronicle provides oracle data and asset verification for blockchain apps; it has audits, but pricing and some risks need checking.
Sablier Flow streams crypto payments over time; it is worth considering with care around contract risk and withdrawal fees.
ether.fi Stake is a non-custodial ETH staking protocol worth researching, but fees, exit timing and smart-contract risks need careful checking.
LayerZero V2 is cross-chain messaging infrastructure; it is worth a look, but app-specific fees and security need checking.
Gate is a long-running centralized exchange with extensive crypto markets, but custody and proof-of-reserves limitations merit caution.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.