JediSwap V2 Review: Is It Safe to Use on Starknet?
JediSwap V2 is described as a community-led automated market maker on Starknet. It is marked inactive, and key details such as audits, fees and current maintenance are not published.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
JediSwap V2 is a Starknet AMM, but it is marked inactive, so it is not a sensible choice for swapping now. The project does not publish audit details, fees or a clear current operating status, leaving security and usability hard to assess. It may be worth revisiting only if the project publishes a recent relaunch update, current contract addresses and meaningful security information.
Our verdict:Avoid3.8/10
HelpfulCoin report card
Avoid3.8/ 10 overall
Serious problems, or it no longer works.
- SafetyHow funds are held, audits, licence, incidents.
- F (3.5 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- – (not graded)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- F (3.0 out of 10)
- ReputationHow established and openly run it is.
- F (3.5 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
JediSwap V2 at a glance
- Type
- Decentralised exchange (AMM)
- Chain
- Starknet
- Status
- Marked inactive
- Token
- None identified
- Audits
- No audits listed
- Fees
- Not published
- Value locked
- $56.3K−6.6% 7d
- Last checked
Green flags and red flags
Reassuring
- Its stated design is a permissionless AMM rather than a custodial exchange account.
- The project is described as community-led and composable on Starknet.
Be careful about
- JediSwap V2 is marked inactive, so current usability is uncertain.
- No audits are listed, and the project does not publish audit details.
- Fees, KYC policy and current maintenance information are not published.
What is JediSwap V2 and what can you do with it?
JediSwap V2 is a decentralised exchange on Starknet, designed to swap tokens through an automated market maker (AMM). An AMM uses token pools and a pricing formula rather than matching buyers and sellers in an order book. JediSwap is described as community-led, permissionless and composable, meaning other Starknet applications may be able to build on its contracts. It has no project token identified in the available classification. Crucially, JediSwap V2 is marked inactive, so readers should not assume its swap interface or contracts are currently usable. A DEX also differs from a centralised exchange: when operating normally, you trade from a crypto wallet rather than depositing funds into a company account. That does not remove risk; smart-contract bugs, thin liquidity and the wrong token address can still cause losses. Its inactivity makes it a poor choice for a new swap unless the project provides clear evidence that it has resumed operating.
Is JediSwap V2 safe to use?
JediSwap V2 is not a good place to trade while it is marked inactive. Its described design is a permissionless Starknet AMM, but permissionless access does not mean that the contracts are safe, maintained or actively monitored. No audits are listed for JediSwap V2, and the project does not publish audit details. There is also no information about a licence, incident history, bug bounty or current security monitoring. Those absences do not prove that a contract has a vulnerability, but they leave important safety questions unanswered. A DEX generally does not take custody of funds in a company account: you approve transactions from your wallet, and smart contracts handle swaps. However, token approvals can give contracts permission to move assets, and a faulty or compromised contract can still put funds at risk. Do not connect a wallet or approve tokens unless you can verify that JediSwap is active and identify the correct, maintained contracts.
Is JediSwap V2 legit, and who runs it?
JediSwap V2 is identifiable as a Starknet decentralised exchange, but the project does not establish who is currently responsible for operating or maintaining it. It is described as community-led and is associated with StarkWareLtd in its product description; that wording does not by itself identify an accountable legal operator or prove an affiliation with StarkWare. A tracking entry dates back to February 2024, but that is not evidence of when the exchange launched or how long it has been actively maintained. There is no published team record, licence, audit list or operating history to assess, and JediSwap V2 is marked inactive. Public reporting also refer to JediSwap generally, which should not be taken as proof that V2 is running or that older information applies to it. Treat the project as unverified for current use: check for recent, official maintenance updates and contract addresses before considering any interaction.
What fees does JediSwap V2 charge?
JediSwap V2 does not publish a fee schedule, so its exact trading costs cannot be stated. On an operating AMM, a swap can involve a pool fee and Starknet network gas; the pool fee may vary by pool or contract, and the network fee is separate. The price impact of a trade can also make the amount received worse, especially when a pool has little liquidity. JediSwap V2 is marked inactive, so you should not estimate costs from general DEX conventions or assume its pools are available. Before any future transaction, look for the exact fee shown in the swap preview and check the expected output, network fee and slippage setting in your wallet. Do not approve a transaction if the fee or token amount is unclear. There is no project token identified, so there is no basis to describe token-based fee discounts or rewards.
How does a JediSwap V2 swap work?
JediSwap V2 is described as an AMM on Starknet. In a typical AMM swap, you connect a compatible wallet, choose tokens, and trade against a pool holding those assets; the pool's balances and pricing formula determine the exchange rate. A wallet approval may be needed before a contract can use a token, followed by a separate swap transaction. These transactions can cost network fees and carry smart-contract risk. JediSwap V2 is marked inactive, so these general DEX steps should not be treated as instructions to use its current interface or contracts. Do not connect or sign transactions unless you can independently verify that the exchange has resumed and that its contract addresses are current. If it is active again, check the token addresses, quoted output, price impact and approval amount before confirming. No current interface instructions or supported-token list are established.
How do you deposit to and withdraw from JediSwap V2?
JediSwap V2 does not publish deposit or withdrawal limits, processing times or a KYC policy. A self-custody DEX normally does not work like an exchange account: you connect your own wallet and swap tokens directly, rather than sending funds to a platform balance. To use a DEX, you generally need the relevant network's assets in your wallet to pay for swaps and network fees. Withdrawing usually means sending tokens from your wallet to another address, or removing liquidity if you had supplied tokens to a pool. These are general DEX mechanics, not confirmation that JediSwap V2 currently supports them. Because JediSwap V2 is marked inactive, do not send funds to an address or interact with its contracts based on old instructions. If activity resumes, verify the official contract addresses and test with a small amount only after checking the transaction details. Transfers on a blockchain are generally difficult or impossible to reverse.
What should you check before using JediSwap V2?
JediSwap V2 is marked inactive, so the safest first step is not to connect a wallet or trade. Before considering it, look for a recent official update stating that V2 is operating, and verify the contract addresses from an official project channel. Check whether the contracts have an independent audit and whether the project has published current fees, supported tokens and security disclosures. If the project cannot provide clear, recent information, choose another exchange. If it does resume, remember that a DEX can expose you to token scams, low liquidity, price impact and risky token approvals. Revoke approvals you no longer need using a trusted wallet or approval-management tool, and never share a seed phrase. These checks cannot guarantee safety, but they can help avoid stale interfaces, counterfeit tokens and unintended approvals. Do not treat JediSwap's permissionless design as a substitute for maintenance or security evidence.
Before you deposit: a quick checklist
- Confirm JediSwap V2 has officially resumed; it is marked inactive.
- Verify Starknet contract addresses through an official project channel.
- Look for independent audit details and current security updates.
- Check the swap fee, expected output and wallet approval before signing.
4 steps
How to get started with JediSwap V2
- 1
Do not connect a wallet or send funds while JediSwap V2 is marked inactive.
- 2
Check official project channels for a current operating announcement and contract addresses.
- 3
Review audit and security disclosures, supported tokens, fees and swap details.
- 4
If it resumes and you proceed, use a small test transaction and inspect each wallet approval.
Plain English
Jargon explained
- AMM
- A smart-contract exchange that prices trades using token pools instead of an order book.
- Price impact
- The amount a trade's price shifts because of its size relative to available pool liquidity.
- Token approval
- A wallet permission allowing a contract to use a particular token.
Quick answers about JediSwap V2
Does JediSwap V2 have a token?
No project token is identified for JediSwap V2. Do not assume a token mentioned in older JediSwap material belongs to V2.
Which blockchain does JediSwap V2 use?
JediSwap V2 is associated with Starknet. No other supported chains are identified.
Is it legal to use JediSwap V2?
Check whether crypto trading is legal where you live and follow local tax rules. Rules can differ by country and by the type of activity.
Compare
JediSwap V2 alternatives
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
PumpSwap is a Solana DEX linked to Pump.fun; it may suit experienced traders, but memecoin, liquidity, and audit risks warrant caution.
PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.
Project X is a Hyperliquid DEX advertising zero-fee swaps, but limited security and fee details call for caution.
Same category
More DEXes
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.
PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.
PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
Same chain
More on Starknet
dRPC provides managed and self-hosted blockchain RPC infrastructure; it is useful for developers, but check its security and billing terms first.
OKX is a large centralized crypto exchange with varied trading tools; check custody, fees and regional rules before depositing.
Gate is a long-running centralized exchange with extensive crypto markets, but custody and proof-of-reserves limitations merit caution.
Fibrous routes wallet-based token swaps across several networks; its published fees are clear, but audit and operator details are limited.
Bitget is a centralized crypto exchange with derivatives and stock-related products; its reserve claims are useful, but verify custody and terms.
Clearstar advises organisations on DeFi risk and curation; it may be worth considering, but verify its controls, custody and fees first.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.