HyperSwap V2 Review: Is It Safe and Legit?
HyperSwap V2 is a decentralized exchange in the Hyperliquid ecosystem for token swaps, liquidity management, and token launches. Its undisclosed fees, team details, and audit status call for caution.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
HyperSwap V2 may suit experienced HyperEVM users who want to swap tokens or manage liquidity directly from a wallet. Its DEX format avoids depositing funds into a conventional exchange account, but it does not remove smart-contract or token risk. The lack of a disclosed audit, clear team information, and published fee terms makes it difficult to assess confidently. Use caution, verify every transaction, and avoid risking money you cannot afford to lose.
Our verdict:Use with caution5.5/10
HelpfulCoin report card
Use with caution5.5/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (4.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- C (6.0 out of 10)
- ReputationHow established and openly run it is.
- D (5.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
HyperSwap V2 at a glance
- Type
- Decentralized exchange
- Network
- Hyperliquid ecosystem / HyperEVM
- Token
- SWAP
- Tracked since
- February 24, 2025
- Audit
- No audit disclosed
- Fees
- Trading fee schedule not published
- Value locked
- $5.18M−11.4% 7d
- Last checked
Green flags and red flags
Reassuring
- HyperSwap V2 is identified as a DEX with swap and liquidity features.
- It has been tracked since February 2025, giving it some operating history.
Be careful about
- HyperSwap V2 has no disclosed audit.
- The project does not publish clear team or licensing details.
- Trading fees and liquidity-provider terms are not published.
- Token-launch screening and safeguards are unclear.
What is HyperSwap V2 and what can you do with it?
HyperSwap V2 is a decentralized exchange (DEX) for swapping tokens and managing liquidity in the Hyperliquid ecosystem. Its listed features also include token launches. It is associated with HyperEVM, the EVM-compatible network in that ecosystem, so users need a compatible wallet and assets on the correct network to trade. A DEX is not the same as a broker: trades are made through blockchain transactions rather than by placing funds in a conventional exchange account. HyperSwap V2’s project materials do not explain how its token-launch feature works or what safeguards apply to new tokens. Its token ticker is SWAP, but the token’s role and any benefits for holders are not published in the project details. Treat those as unanswered questions rather than assuming the token is required to trade.
Is HyperSwap V2 safe to use?
HyperSwap V2 has meaningful risks, and it does not disclose an audit for the exchange’s contracts. Using a DEX usually means you keep control of your wallet, but a transaction can still give a smart contract permission to move approved tokens. Bugs, malicious token contracts, phishing sites, or incorrect transactions can lead to losses that may not be recoverable. HyperSwap V2’s licensing status, security review, and incident history are not published. Before connecting, check that the app address is the genuine one and that your wallet shows the expected network and contract permissions. Start with a small transaction if you decide to proceed, and do not approve a token allowance you do not understand. An unaudited DEX is not necessarily unsafe, but the missing independent security review leaves you with less evidence to judge its contracts.
Is HyperSwap V2 legit, and who runs it?
HyperSwap V2 appears to be an operating DEX, but there is not enough public information to judge the people or company behind it. It has been tracked since February 24, 2025, and is categorized as a DEX on the Hyperliquid network. That provides some history of operation, not proof that its contracts, team, or token are trustworthy. The project does not publish clear team details, licensing information, or a disclosed audit. Its SWAP ticker alone does not establish the token’s purpose or value. For a more confident assessment, look for verifiable contract addresses, a clear explanation of who maintains the protocol, and independent security documentation. Until those details are available, use the exchange only with amounts you can afford to lose and avoid treating its presence in the ecosystem as an endorsement.
What fees does HyperSwap V2 charge?
HyperSwap V2 does not publish its trading-fee schedule in the project details, so you should check the swap screen and transaction confirmation before trading. A swap may also incur blockchain gas fees, which are separate from any fee charged by the exchange and can vary with network conditions. The price shown can differ from the final execution price if the pool is shallow or the trade is large; this is called slippage. If you add tokens to a liquidity pool, you may earn a share of trading fees, but the rate and payout terms are not published. Liquidity providers also face impermanent loss: their pool position can be worth less than simply holding the same tokens when prices change. Do not treat an advertised or displayed return as guaranteed, and check all costs before signing a transaction.
How do you use HyperSwap V2?
To use HyperSwap V2, first make sure you have the official app address and a wallet that supports the HyperEVM network. Keep enough of the network’s gas token in that wallet to pay transaction costs; confirm the required token and network in your wallet before sending funds. Connect the wallet, choose the tokens and amount, then review the exchange rate, minimum received, price impact, and any approval request. A token approval gives a contract permission to use a specified asset, so check the token and allowance before signing. For a first trade, a small amount can help you check that the process works as expected. If you plan to provide liquidity or launch a token, read the transaction details carefully: those actions have different risks from a simple swap, and HyperSwap V2 does not publish comprehensive instructions or safeguards for them.
How do deposits, withdrawals, and KYC work on HyperSwap V2?
HyperSwap V2 is a wallet-based DEX rather than an exchange account where you make a cash deposit. You send crypto to your own wallet on the correct network, then swap or add liquidity through on-chain transactions. To move assets onto HyperEVM, you may need a bridge or another supported route; check the network and token carefully, because sending assets to the wrong chain or address can cause a loss. To get funds out, swap if needed and send them from your wallet to a destination that supports the same asset and network. HyperSwap V2 does not publish withdrawal limits, processing times, or a clear KYC policy. DEX swaps commonly do not use the same account-based withdrawal process as centralized exchanges, but wallet providers, bridges, or other services may apply their own checks and restrictions.
What should liquidity providers and token buyers know about HyperSwap V2?
Adding liquidity to HyperSwap V2 can earn trading fees, but it does not guarantee a profit. Pool assets can move in price relative to each other, changing the value of your share; this is impermanent loss. You may also face contract risk, low liquidity, or difficulty exiting a position at the expected price. HyperSwap V2 does not publish pool-specific fee rates or detailed information about how its token-launch feature screens new projects. Newly launched tokens can be especially risky: a token may have little liquidity, an unreliable contract, or a price that moves sharply. Before committing funds, check the pool’s assets and available liquidity, read the token contract information, and understand how you can withdraw your share. Do not rely on the SWAP ticker or a token launch being available as evidence that a project has been vetted.
Before you deposit: a quick checklist
- Verify the HyperSwap V2 app address and the wallet’s network before connecting.
- Check token addresses, contract permissions, slippage, and gas before signing.
- Confirm the fee and liquidity details in the transaction screen; published rates are unavailable.
- Do not assume token launches are vetted or audited.
5 steps
How to get started with HyperSwap V2
- 1
Confirm the official HyperSwap V2 app address and check that it is not a lookalike.
- 2
Set up a wallet that supports HyperEVM and verify the required network and gas token.
- 3
Fund your wallet using a supported route, checking the network and token before sending.
- 4
Review token addresses, fees, slippage, and approval permissions before signing a small test swap.
- 5
Only add liquidity or interact with token launches after understanding the contract and exit risks.
Plain English
Jargon explained
- Smart contract
- A blockchain program that carries out trades or manages funds according to its code.
- Liquidity pool
- A pool of tokens used to facilitate swaps, supplied by people who may earn a share of fees.
- Slippage
- The difference between the expected and actual trade price, often caused by limited pool depth.
Quick answers about HyperSwap V2
What is the SWAP token used for?
SWAP is the token ticker associated with HyperSwap V2. The project does not publish a clear explanation of the token’s utility or whether it is needed to use the exchange.
Which network does HyperSwap V2 use?
HyperSwap V2 is associated with HyperEVM in the Hyperliquid ecosystem. Make sure your wallet and assets are on the required network before interacting.
Can HyperSwap V2 reverse a failed or mistaken transaction?
HyperSwap V2 does not publish customer-support or dispute-resolution details. On-chain transactions are generally difficult or impossible to reverse once confirmed.
Compare
HyperSwap V2 alternatives
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Project X is a Hyperliquid DEX advertising zero-fee swaps, but limited security and fee details call for caution.
Hyperliquid Spot Orderbook is an onchain crypto exchange; its transparent matching is appealing, but check its security and costs first.
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Balancer V3 is a multi-chain DEX with customizable pools; pool-level risks and unclear audit status make careful checks important.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
Same category
More DEXes
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.
PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.
Same chain
More on Hyperliquid L1
Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.
Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.
Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.
Sablier Flow streams crypto payments over time; it is worth considering with care around contract risk and withdrawal fees.
Phantom is a self-custody crypto wallet with trading features; it is not presented as a separate blockchain and has notable disclosure gaps.
LayerZero V2 is cross-chain messaging infrastructure; it is worth a look, but app-specific fees and security need checking.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.