Skip to content
HelpfulCoin

Hyperbeat LST Review: Is beHYPE Safe to Use?

Hyperbeat LST lets you stake HYPE on Hyperliquid and receive beHYPE, a liquid-staking token. The product is active, but fees, redemption terms and audit details need closer checking.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

Hyperbeat LST may suit HYPE holders who want a liquid-staking token, beHYPE, rather than leaving HYPE in a direct stake. Its collaboration with Etherfi and staking documentation are positive signs, but they do not remove contract, validator or liquidity risks. No audits are listed, and Hyperbeat does not publish clear fees or redemption timing in the project information presented. Check the current terms and contract details before staking, and avoid committing funds you may need to access quickly.

Our verdict:Use with caution5.3/10

HelpfulCoin report card

Use with caution

5.3/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
D (4.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
D (4.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
C (6.0 out of 10)
ReputationHow established and openly run it is.
D (5.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Hyperbeat LST at a glance

Category
Staking
Product
Liquid staking for HYPE
Token
beHYPE
Network
Hyperliquid
Partner
Built with Etherfi
Audits
None listed
Status
Active
Value locked
$11.1M−4.7% 7d
Last checked

Green flags and red flags

Reassuring

  • Hyperbeat has documentation for its staking product.
  • beHYPE is described as built in collaboration with Etherfi.
  • Hyperbeat’s homepage describes its vaults as operational.

Be careful about

  • No audits are listed for Hyperbeat LST.
  • Hyperbeat does not publish clear fees or redemption timing in the project information presented.
  • beHYPE may trade below the value of the HYPE it represents.

What is Hyperbeat LST and what does beHYPE do?

Hyperbeat LST is a liquid-staking service for HYPE on Hyperliquid: you stake HYPE and receive beHYPE, a token intended to represent your staked position. Hyperbeat describes beHYPE as built in collaboration with Etherfi. Unlike a direct stake, a liquid-staking token may be usable in other supported apps while the underlying HYPE is staked; that added flexibility depends on integrations and does not make the position risk-free. Hyperbeat also offers other vault products, but those are separate from beHYPE liquid staking. There is no separate Hyperbeat token identified in the project details. The central trade-off is that you gain a transferable staking token but rely on Hyperbeat’s contracts and staking arrangements, as well as the market price and redemption process for beHYPE.

Is Hyperbeat LST safe to stake HYPE with?

There is not enough published security information to treat Hyperbeat LST as low-risk. The project’s audit count is zero in the available audit listings, and Hyperbeat does not publish audit details in the information presented. That does not prove the contracts are unaudited, but you should ask Hyperbeat for current audit reports before depositing. Liquid staking also adds risks beyond holding HYPE: contract bugs, validator or staking problems, and beHYPE trading below the value of the HYPE it represents. Hyperbeat’s homepage labels its vaults operational, but that is not a security guarantee. No incident history is published in the project information presented. Only stake an amount you can afford to leave exposed to these risks, and do not assume that Etherfi’s involvement means every part of the service is independently audited or insured.

Is Hyperbeat LST legit, and who runs Hyperbeat?

Hyperbeat is an active product with documentation for its staking service, and its beHYPE product is described as developed with Etherfi. Those are useful signs that it is more than an unidentified token or a bare landing page. However, public sources do not identify the people or legal entity running Hyperbeat, provide a clear operating history, or publish independent audit information for beHYPE. They also do not establish a licensing status or a detailed incident record. That makes it difficult to judge accountability and long-term reliability. Treat Hyperbeat as a real, functioning crypto product, not as a regulated bank or a guaranteed staking service. Before committing funds, check the current official documentation, the contract address and any audit reports, and confirm that you are using Hyperbeat’s genuine app.

What fees and rewards does Hyperbeat beHYPE have?

Hyperbeat does not publish a complete fee schedule for beHYPE in the project information presented, so the exact cost of staking, unstaking or using the token elsewhere is unclear. You may also pay Hyperliquid network transaction fees, and third-party apps can charge their own fees if you use beHYPE in them. Liquid-staking rewards are not the same as a guaranteed interest rate: the amount you receive can change with staking rewards, validator performance and any protocol-level deductions. Check the live transaction preview and official staking terms before approving a deposit or withdrawal. Do not rely on advertised yields from a separate Hyperbeat vault as the expected return for beHYPE; a vault and a liquid-staking position are different products with different risks and costs.

How do you stake HYPE and get beHYPE?

To use Hyperbeat LST, connect a wallet that holds HYPE on the supported Hyperliquid network, then use the official Hyperbeat app’s staking flow to exchange HYPE for beHYPE. Review the amount, transaction details and any approval request before signing. The basic idea is that HYPE is staked and beHYPE represents your position, but the project information presented does not specify the exact conversion rate, reward accounting method or transaction sequence. You will need to keep control of your wallet and protect its recovery phrase; Hyperbeat should not need that phrase. Before staking a larger amount, verify the app and token addresses through official Hyperbeat channels, read the current staking documentation, and consider testing the process with a small amount. Never sign a wallet request you do not understand.

How do Hyperbeat LST withdrawals work, and is KYC required?

You can expect to need HYPE on Hyperliquid to enter the liquid-staking position, but Hyperbeat does not publish clear deposit minimums, maximums or withdrawal limits in the project information presented. To exit, you would generally need to redeem beHYPE through the service or sell it where it is supported; those routes can have different timing, prices and fees. The exact unstaking queue, redemption availability and processing time are not specified, so do not assume you can instantly exchange beHYPE back for HYPE at a fixed rate. The project also does not publish KYC requirements for this staking flow. Check the current app and official terms for supported routes and any limits before depositing, and consider whether you can tolerate delayed access to your HYPE.

Can you sell or redeem beHYPE at any time?

beHYPE may give you a liquid token while your HYPE is staked, but liquidity is not guaranteed at a fair or fixed price. If you sell beHYPE instead of redeeming it, its market price can fall below the value of the underlying staked HYPE, especially when buyers are scarce. If you redeem it, the timing and terms depend on Hyperbeat’s process, which are not published in the project information presented. You also take on smart-contract, validator and operational risks, and any rewards can vary rather than arrive at a guaranteed rate. Before using beHYPE in another protocol, check that protocol’s own risks and whether it supports the exact token. Do not count on immediate access to the original HYPE when deciding how much to stake.

Before you deposit: a quick checklist

  • Verify Hyperbeat’s official app and beHYPE contract address before connecting a wallet.
  • Ask for current audit reports; no audits are listed for Hyperbeat LST.
  • Check the live staking, redemption and transaction fees before approving.
  • Confirm the unstaking route and timing, since redemption terms are not published.
  • Start with a small amount and never share your wallet recovery phrase.

5 steps

How to get started with Hyperbeat LST

  1. 1

    Open Hyperbeat through its official channels and verify the app before connecting your wallet.

  2. 2

    Confirm your wallet holds HYPE on the supported Hyperliquid network.

  3. 3

    Read the current staking and redemption terms, including fees, limits and timing.

  4. 4

    Stake a small amount first and review each transaction before signing.

  5. 5

    Keep wallet recovery details private and track the beHYPE token you receive.

Plain English

Jargon explained

Liquid-staking token
A token representing crypto deposited into a staking service.
Staking
The process of helping secure a proof-of-stake network with crypto.
Wallet
A wallet-held account that lets you approve blockchain transactions.

Quick answers about Hyperbeat LST

Is beHYPE the same as HYPE?

beHYPE is the liquid-staking token associated with Hyperbeat’s HYPE staking service. It represents a staked position, rather than being a separate Hyperbeat governance token.

Is Hyperbeat LST currently operational?

Hyperbeat’s homepage describes its vaults as operational, but that does not confirm current beHYPE redemption availability or timing. Check the staking app and current terms before depositing.

What is Etherfi’s role in Hyperbeat beHYPE?

Hyperbeat’s beHYPE product is described as built in collaboration with Etherfi. That relationship alone does not establish that Etherfi guarantees deposits or audits every part of the service.

Compare

Hyperbeat LST alternatives

All alternatives
Kinetiq kHYPE logoScore 5.8 out of 10

Kinetiq kHYPE lets you stake HYPE for a DeFi-usable token; check audits, fees and withdrawal timing before staking.

TVL $660M−15.4%Hyperliquid L1
SSV Network logoScore 5.8 out of 10

SSV Network distributes Ethereum validator duties and offers SSV staking, but variable rewards and staking risks make careful checks essential.

TVL $9.58B−14.4%Ethereum
stHYPE logo

stHYPE

Staking

Score 5.4 out of 10

stHYPE is Valantis’s liquid staking token for HYPE on Hyperliquid; check its unclear fees, custody and exit terms before using it.

TVL $152M−11.0%Hyperliquid L1
Obol logo

Obol

Staking

Score 5.7 out of 10

Obol builds Ethereum validator infrastructure; it is worth a look for operators, but staking terms and risks depend on the provider.

TVL $1.11B−9.0%Ethereum
Babylon Protocol logoScore 5.6 out of 10

Babylon builds native Bitcoin staking and collateral products; it is worth exploring cautiously because fees and audit details are unclear.

TVL $2.69B−12.8%Bitcoin
ether.fi Stake logoScore 6.2 out of 10

ether.fi Stake is a non-custodial ETH staking protocol worth researching, but fees, exit timing and smart-contract risks need careful checking.

TVL $3.47B−14.6%Ethereum · Base · Arbitrum +3

Same category

More Staking dApps

Staking rankings
Laine SOL logo

Laine SOL

Staking

Score 6.8 out of 10

Laine SOL offers native and liquid Solana staking, with a stated 0% pool fee but added risks for laineSOL holders.

TVL $859K−17.7%Solana
Score 6.8 out of 10

wstETH is Lido’s wrapped stETH token for Ethereum DeFi, but it carries staking, smart-contract and market risks.

Ethereum

Lido Dao

Staking

Score 6.4 out of 10

Lido is an Ethereum liquid-staking protocol governed by Lido DAO; it offers stETH for staked ETH, with contract, validator and liquidity risks.

Ethereum
Jito Liquid Staking logoScore 6.3 out of 10

Jito Liquid Staking issues JitoSOL for staked SOL, with variable staking and network rewards; check fees, risks and exits first.

TVL $724M−19.0%Solana
Marinade Liquid Staking logoScore 6.2 out of 10

Marinade offers Solana staking with native SOL or mSOL; it is worth considering if you understand the fee and smart-contract risks.

TVL $163M−17.6%Solana
BlazeStake logo

BlazeStake

Staking

Score 6.1 out of 10

BlazeStake is a Solana liquid-staking protocol that issues bSOL; it may suit experienced users, but fees and security details need checking.

TVL $63.0M−17.8%Solana

Same chain

More on Hyperliquid L1

Hyperliquid L1 rankings
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.05B−10.1%Ethereum · Robinhood Chain · Base +19
Bitvavo logo

Bitvavo

Centralized Exchanges

Score 6.9 out of 10

Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.

TVL $329M+7.8%Ethereum · Bitcoin · Solana +9
Across logo

Across

Cross Chain Bridge

Score 6.8 out of 10

Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.

TVL $13.4M−11.3%Ethereum · Arbitrum · Optimism +19
Sablier Lockup logoScore 6.8 out of 10

Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.

TVL $1.54M−10.7%Ethereum · Polygon · Arbitrum +25
Sablier Flow logo

Sablier Flow

Payments

Score 6.7 out of 10

Sablier Flow streams crypto payments over time; it is worth considering with care around contract risk and withdrawal fees.

TVL $441K−7.9%Ethereum · Arbitrum · Base +23
Phantom Chain logoScore 6.3 out of 10

Phantom is a self-custody crypto wallet with trading features; it is not presented as a separate blockchain and has notable disclosure gaps.

Solana · Ethereum · Bitcoin +2

Where the answers come from

Sources

  1. defillama.com/protocol/hyperbeat-lst(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.