GoPlus Locker V2 Review: Is It Safe to Lock Tokens?
GoPlus Locker V2 is an on-chain token and liquidity locker associated with GoPlus Security. It can make lock terms publicly inspectable, but no V2 audit is listed and fees are not clearly published.
Researched and written by the HelpfulCoin teamChecked 9 questions answered
The short answer
GoPlus Locker V2 may suit token teams that need an on-chain lock record across supported networks. Its connection to GoPlus Security and publicly inspectable lock activity are positives, but no V2 audit is listed and service fees are not clearly published. Treat each lock as a commitment: check the contract, unlock conditions and full transaction cost before sending tokens, and do not rely on an early withdrawal.
Our verdict:Use with caution5.4/10
HelpfulCoin report card
Use with caution5.4/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (4.5 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- C (6.0 out of 10)
- ReputationHow established and openly run it is.
- C (6.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
GoPlus Locker V2 at a glance
- What it is
- On-chain token and liquidity locker
- Chains
- Base, BNB Chain, Ethereum, Arbitrum
- Associated with
- GoPlus Security
- Audit
- No V2 audit listed
- Fees
- Service fees not published
- Ecosystem token
- GPS
- Value locked
- $284K−13.4% 7d
- Last checked
Green flags and red flags
Reassuring
- The locker is associated with GoPlus Security's wider Web3 security product suite.
- On-chain lock records can be checked against the relevant blockchain.
- The product is identified as supporting four major EVM networks.
Be careful about
- No audit is listed for the V2 locker, so contract risk remains.
- GoPlus does not publish a clear V2 fee schedule.
- Locked assets may be inaccessible until their contract conditions are met.
What is GoPlus Locker V2 and what can you do with it?
GoPlus Locker V2 is an on-chain service for locking tokens or liquidity, often so a project can show that assets will not be immediately available to their owner. GoPlus describes its SafeToken Locker as a transparent locking platform, and the locker search description refers to time and target-price unlock conditions. A lock is a contract rule on a blockchain, not a promise that the token itself is safe or that its price will hold. GoPlus Locker V2 is identified as operating on Base, BNB Chain, Ethereum and Arbitrum. You can use a supported wallet to create or inspect a lock, but the precise contract terms matter: check the asset, amount, unlock conditions and destination before approving a transaction. It is a tool for token issuers and liquidity managers, rather than a place to earn a stated deposit yield.
Is GoPlus Locker V2 safe to lock tokens in?
GoPlus Locker V2 has some useful transparency features, but it should not be treated as risk-free. Its locks are on-chain, which lets users inspect the recorded lock status, and the product is associated with GoPlus Security. However, no audit is listed for the V2 locker, and there is no published safety guarantee that would remove smart-contract risk. A contract flaw, incorrect lock setup or compromised owner wallet could put locked tokens at risk. Once assets enter a lock, the owner may not be able to retrieve them until the contract's conditions are met. GoPlus does not publish a V2 incident history in the product details available, so a clean security record should not be assumed. Before relying on a lock as proof of liquidity security, verify the contract address and transaction on the relevant chain, review the lock conditions, and consider an independent technical review for material amounts.
Is GoPlus Locker V2 legit, and who runs it?
GoPlus Locker V2 is a real product associated with GoPlus Security, a company whose site describes a wider set of Web3 security tools, including security APIs, a browser extension and SafeToken Locker. Its search presence also includes dedicated locker pages and a lock-detail page. Those are signs that the product is more than an unidentified wallet prompt, but they do not prove that every lock contract is secure or that GoPlus guarantees recovery if something goes wrong. The available product information does not give a V2 launch date, named team members, a licence, or a published audit for the locker. A third-party report also describes GoPlus lockers as part of SafeToken Protocol, but that alone is not evidence of independent oversight. Treat the GoPlus brand as context, not as a substitute for checking the specific contract and its terms.
What does GoPlus Locker V2 cost?
GoPlus Locker V2 does not publish a clear fee schedule in the product details. Expect to pay the blockchain's transaction fee, called gas, when creating or managing a lock; the amount varies by network and network congestion. The product may also charge a service fee, but you should check the current app transaction summary before signing because a fee amount is not published. A lock is not described as an interest-bearing deposit, and no yield or return is promised. The value of locked tokens can also change while they are unavailable, and any token-related transfer or liquidity action may have its own costs. Read the wallet confirmation carefully: it should show the network and the transaction being approved. If the quoted total or token amount does not match what you intended, do not sign.
How do you use GoPlus Locker V2?
To use GoPlus Locker V2, first open the official GoPlus site and follow its SafeToken Locker entry to the app; check the domain carefully before connecting a wallet. Select a supported network, such as Base, BNB Chain, Ethereum or Arbitrum, and make sure the wallet has that network's gas token. Choose the token or liquidity position, enter the amount, and set the lock conditions. The locker description refers to time and target-price conditions, so read whether the particular lock requires one or both conditions and when they can be changed. Review the contract address, amount, unlock terms and any fee in the wallet prompt before approving. After the transaction confirms, save its transaction ID and check the lock record on-chain. Never sign a request you cannot explain, and do not assume a displayed token or lock has been independently audited.
How do deposits and withdrawals work on GoPlus Locker V2?
You send tokens or a liquidity position from your connected wallet into the lock contract; this is an on-chain transfer, not a bank deposit or an exchange balance. While the lock is active, the contract controls when those assets can be released under the conditions set for that lock. Unlocking is therefore not the same as making an ordinary withdrawal: the owner may need to wait until the applicable time and target-price conditions are satisfied, then submit an on-chain transaction and pay gas. Do not count on an early exit unless the specific contract explicitly provides one. GoPlus does not publish general withdrawal timelines, minimums, maximums, or KYC requirements for V2 in the product details. Check the lock's own terms and transaction screen before committing assets, and make sure the receiving wallet and chain are correct. A token lock does not guarantee that the token can be sold or that liquidity remains usable.
Before you deposit: a quick checklist
- Confirm you reached the GoPlus SafeToken Locker app from GoPlus's official site.
- Check the chain, token contract and lock contract before approving.
- Read whether time and target-price conditions must both be met to unlock.
- Review the transaction's token amount, gas cost and any service fee.
- Only lock assets you can leave unavailable for the full stated period.
5 steps
How to get started with GoPlus Locker V2
- 1
Open the SafeToken Locker through GoPlus's official site and verify the app domain.
- 2
Select a supported chain and confirm your wallet is on that network.
- 3
Check the token or liquidity contract, amount and exact unlock conditions.
- 4
Review fees and the transaction details, then approve only if they match your intent.
- 5
Save the transaction ID and verify the resulting lock record on-chain.
Plain English
Jargon explained
- Gas
- A blockchain transaction fee paid to process an action on a network.
- Lock contract
- A blockchain program that applies rules and releases assets when its conditions are met.
- Liquidity
- Tokens kept in a trading pool so users can swap between assets.
Quick answers about GoPlus Locker V2
Can you unlock tokens early on GoPlus Locker V2?
The locker description refers to time and target-price unlock conditions. Check the specific lock contract to see how its conditions work; do not assume assets can be released early.
Which blockchains does GoPlus Locker V2 support?
GoPlus Locker V2 is identified as supporting Base, BNB Chain, Ethereum and Arbitrum. Check the app's current network options before starting, since chain support can change.
Do you need GPS to use GoPlus Locker V2?
GPS is identified as the GoPlus token, but the product details do not say that GPS is required to create a lock or pay fees. Check the app transaction summary before connecting or approving.
Compare
GoPlus Locker V2 alternatives
Team Finance is a multi-chain token-management toolkit; its non-custodial locks may be useful, but audit and fee details need checking.
UNCX Network offers on-chain liquidity locks, vesting and reward tools; worth a look with caution about audits and operator transparency.
GoPlus Locker V3 locks tokens and liquidity on four chains; check its contract conditions and audit status before using it.
UNCX Network V3 offers liquidity locks, vesting and reward tools, but check its audits, fees and lock terms before committing assets.
FlokiFi Locker lets users lock tokens, liquidity assets and NFTs; it is worth checking, but verify its audits, fees and lock terms first.
Bitbond Lockers is a no-code tool for locking tokens on seven chains; its locker-specific fees and audit coverage are unclear.
Same category
More Token Lockers
StakePoint is a Solana token-locking and staking platform; its on-chain locks are promising, but audit and fee details need checking.
Team Finance is TrustSwap’s token-management platform; its tools are clear, but check fees and contract terms before committing assets.
Coinscope combines token discovery with multi-chain token lockers; its contract security and fees need careful checking.
SovCube is a BSOV locking dApp with planned rewards and governance; its testnet site and undisclosed audit call for caution.
DaVinciGraph is a Hedera token-management suite; its unaudited contracts and unclear fees call for caution.
DeepLock is a token locker project on Bnb Chain.
Same chain
More on Base
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.