Gliquid Review: Is This Hyperliquid DEX Safe?
Gliquid is a V4 automated market maker on the Hyperliquid ecosystem for swapping tokens and providing liquidity. It is a young project; key details about its operators, fees, contracts, and withdrawal rules are not specified.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Gliquid may suit experienced DeFi users who understand AMM and smart-contract risks and can verify its official contracts. It is a young Hyperliquid-based exchange with two audit entries, but their scope and findings are unspecified. Fees, operators, and withdrawal rules are also unclear, and the network description varies. Do not deposit until you have verified the app, chain, contracts, and audit reports.
Our verdict:Use with caution5.1/10
HelpfulCoin report card
Use with caution5.1/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (4.5 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- D (5.0 out of 10)
- ReputationHow established and openly run it is.
- D (4.5 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Gliquid at a glance
- Type
- Decentralized exchange and V4 AMM
- Network
- Hyperliquid L1; some descriptions say HyperEVM
- Token
- None specified
- Audits
- Two audit entries; details unspecified
- Tracked since
- 2025-06-10
- Value locked
- $20.9K−8.6% 7d
- Last checked
Green flags and red flags
Reassuring
- Gliquid is identified as a V4 automated market maker on the Hyperliquid ecosystem.
- Two audit entries are associated with the project, though their scope and findings need checking.
- The project has been tracked since June 2025.
Be careful about
- Gliquid’s homepage, operators, and exact contract setup could not be verified.
- The two audit entries lack specified firms, scope, dates, and findings.
- Fees, KYC rules, deposit routes, withdrawal limits, and processing times are not specified.
- Descriptions differ on whether the deployment is Hyperliquid L1 or HyperEVM.
What is Gliquid and what can you do with it?
Gliquid is a decentralized exchange (DEX) built around a V4 automated market maker on the Hyperliquid ecosystem. It is designed for swapping tokens and providing liquidity, meaning depositing tokens into a pool that traders use. Gliquid describes its approach as aiming for more efficient liquidity, but that is a design goal, not a guarantee of better prices or returns. It has no project token reported. The product is described as active and has been tracked since June 2025. The homepage could not be verified, so there is no dependable basis to explain its current interface, supported markets, or exact features. Treat Gliquid as a small, early-stage DeFi exchange rather than a mature general-purpose trading venue.
Is Gliquid safe to use?
Gliquid’s safety is uncertain, so use caution before depositing funds. The project has two audit entries associated with it, but the audit firms, dates, contract scope, findings, and whether fixes were completed are not specified. An audit can help identify software vulnerabilities, but it does not guarantee that a protocol is safe or that deposited assets can always be withdrawn. Gliquid is a decentralized exchange, so trading and liquidity provision generally involve smart contracts rather than a conventional exchange holding an account balance. The exact custody and contract arrangements for Gliquid itself are not documented in the project details available. No licence or reported security incident is specified. Before connecting a wallet, verify the official app and contract addresses, read the audit reports, and start with an amount you can afford to lose.
Is Gliquid legit or a scam?
Gliquid appears to be a real DeFi exchange project, but there is not enough public operating history to call it well established. It is described as a V4 automated market maker on the Hyperliquid ecosystem, and it has been tracked since June 2025. The project’s team, company, funding, and operating jurisdiction are not specified, and its homepage could not be verified. Those gaps make it difficult to assess who is accountable if something goes wrong. Its two audit entries are a positive signal only if the reports are genuine, relevant to the live contracts, and their findings have been addressed. No licence or user-protection framework is specified. Consider Gliquid a young project with limited demonstrated track record, not an exchange with the protections or customer support of a regulated broker.
What fees does Gliquid charge?
Gliquid’s exact trading and liquidity-provider costs are not published in the project details available. A swap on an automated market maker can involve a pool trading fee, network gas, and a price impact—the difference between the expected price and the execution price. The size of the price impact can depend on pool liquidity and trade size. Liquidity providers may also face impermanent loss, where the value of their deposited tokens changes relative to simply holding them. These are common DEX risks, not confirmed Gliquid fee rates or outcomes. Check the fee shown before each transaction and compare the quoted output with other venues. For liquidity deposits, review the pool’s fee rules, token ratio, withdrawal terms, and any contract permissions before confirming. Do not assume that an advertised efficiency goal means lower costs.
How do you use Gliquid?
Gliquid is intended to work through an automated market maker, but its exact app flow and contract mechanics are not documented. In a typical AMM, users connect a wallet, choose a token pair, and swap against a liquidity pool instead of placing an order with a central exchange. A liquidity provider deposits tokens into a pool and may earn a share of trading fees, while taking the risk that pool prices move against the deposit. Gliquid describes its system as V4, but that label alone does not explain its features or protect users from contract risk. If using it, first verify the official interface and network through Gliquid’s own trusted channels. Check the wallet’s network, token contract addresses, transaction details, and permissions before signing. Avoid approving unlimited token spending unless you understand and accept the risk.
How do you deposit to and withdraw from Gliquid?
Gliquid’s deposit, withdrawal, and KYC rules are not specified. A decentralized exchange normally does not use bank deposits: users connect a compatible wallet and transact with tokens on the protocol’s network. Moving assets onto that network may require a bridge, which adds separate contract and network risks. A swap or liquidity withdrawal is usually initiated from the connected wallet, but the actual process and supported assets depend on Gliquid’s live app and contracts. The project does not publish withdrawal limits, minimums, processing times, or any KYC requirements. Do not send funds to an address or bridge based on an unofficial guide. Confirm the supported network and withdrawal route directly through trusted Gliquid channels, and keep enough native network tokens for transaction fees.
Which network does Gliquid use, and what should traders check?
Gliquid’s exact deployment should be checked before connecting a wallet because its network description is not fully consistent. The project is categorized as running on Hyperliquid L1, while some descriptions call it HyperEVM-native. Network names matter: sending tokens to the wrong chain or approving a contract on the wrong network can put funds at risk. Gliquid’s TVL and markets can also change; public sources do not provide a dated figure that can be treated as current. For a small DEX, shallow liquidity may mean larger price impact or difficulty exiting a position. Verify the chain, pool depth, token addresses, and the amount you would receive before each transaction. Do not rely on a token or market appearing in a third-party listing as proof that it is supported by Gliquid.
Before you deposit: a quick checklist
- Verify Gliquid’s official app and contract addresses before connecting.
- Confirm whether the transaction uses Hyperliquid L1 or HyperEVM.
- Read both audit reports and check which live contracts they cover.
- Check pool liquidity, quoted price impact, and fees before swapping.
- Review token approvals and keep network fees available for withdrawals.
5 steps
How to get started with Gliquid
- 1
Find Gliquid’s official app through trusted project channels and verify its contract addresses.
- 2
Confirm the correct network and supported token contracts before transferring assets.
- 3
Read the audit reports and check that they cover the contracts you will use.
- 4
Review pool liquidity, quoted output, fees, and wallet permissions before signing.
- 5
Start with a small transaction and confirm you can withdraw before depositing more.
Plain English
Jargon explained
- Automated market maker (AMM)
- A token pool that lets users trade directly against deposited assets rather than matching orders.
- Price impact
- The difference between a quoted price and the price a trade actually receives.
- Impermanent loss
- A possible loss for liquidity providers when pool prices shift compared with simply holding the tokens.
Quick answers about Gliquid
Does Gliquid have a token?
No Gliquid project token is specified. Be cautious of tokens using the Gliquid name unless their contract address is verified through trusted project channels.
Is Gliquid still active?
Gliquid is described as active, but the project’s homepage could not be verified. Confirm that its official app and contracts are currently operating before interacting.
Can you lose money using Gliquid?
No. A DEX swap or liquidity deposit can lose value through price changes, fees, low liquidity, or smart-contract problems. Only risk funds you can afford to lose.
Compare
Gliquid alternatives
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Project X is a Hyperliquid DEX advertising zero-fee swaps, but limited security and fee details call for caution.
Hyperliquid Spot Orderbook is an onchain crypto exchange; its transparent matching is appealing, but check its security and costs first.
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Balancer V3 is a multi-chain DEX with customizable pools; pool-level risks and unclear audit status make careful checks important.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
Same category
More DEXes
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.
PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.
Same chain
More on Hyperliquid L1
Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.
Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.
Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.
Sablier Flow streams crypto payments over time; it is worth considering with care around contract risk and withdrawal fees.
Phantom is a self-custody crypto wallet with trading features; it is not presented as a separate blockchain and has notable disclosure gaps.
LayerZero V2 is cross-chain messaging infrastructure; it is worth a look, but app-specific fees and security need checking.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.