Skip to content
HelpfulCoin

Is Free Protocol Safe? RPC Service Review

Free Protocol is a free public RPC service for connecting apps and wallets to Ethereum, Base, Polygon and Arbitrum. It requires no API key for its public tier, but publishes limited information about audits and operational track record.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

Free Protocol is worth considering for testing, development and light use: its public RPC endpoints cover four chains and require no signup or API key. The main benefits are simple access and a published free allowance. The main caution is limited public evidence about audits, uptime and long-term reliability. It does not hold your crypto, but an RPC provider can affect what your wallet or app can read and whether it can submit transactions, so keep a backup for important use.

Our verdict:Good, with caveats6.7/10

HelpfulCoin report card

Good, with caveats

6.7/ 10 overall

Worth using if the caveats below don’t affect you.

SafetyHow funds are held, audits, licence, incidents.
C (6.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
A (9.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
B (8.0 out of 10)
ReputationHow established and openly run it is.
C (5.5 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Free Protocol at a glance

Service
Public JSON-RPC infrastructure
Networks
Ethereum, Base, Polygon, Arbitrum
Operator
Etox infrastructure
Public tier
No signup or API key
Daily limit
333,333 CU per IP
Token
None
Last checked

Green flags and red flags

Reassuring

  • The public endpoints require no account, API key or payment card.
  • The operator is identified as Etox.
  • The service publishes request-rate and compute-unit limits, including HTTP 429 behavior.

Be careful about

  • Free Protocol does not publish an independent audit or security review.
  • The service does not publish an uptime guarantee or incident history.
  • Public-tier limits apply per client IP, and heavier requests use more CU.

What is Free Protocol and what can you use it for?

Free Protocol is a public JSON-RPC service that lets wallets and apps send read requests and signed transactions to Ethereum, Base, Polygon and Arbitrum. RPC is the connection software uses to ask a blockchain for information or submit a transaction. Free Protocol offers public endpoints without an account or API key, and says its free allowance is about 333,000 calls per day per IP. It can be useful for trying a wallet, connecting a small project, or making occasional blockchain queries. It is infrastructure, not a wallet, exchange or DeFi app: it does not give you a token, hold your assets or provide a place to trade.

Is Free Protocol safe to use with a wallet?

Free Protocol does not custody your crypto: it provides a connection to blockchain networks, while your wallet holds keys and signs transactions. That reduces the risk of the service directly taking funds, but it does not make every interaction risk-free. An RPC provider may see your IP address and the requests you send, and a provider outage or inaccurate response could disrupt an app or wallet. Check important balances and transactions using another trusted RPC or block explorer when needed. Free Protocol does not publish an audit, security review, licence or incident history. It is an infrastructure service rather than a financial custodian, but you should still avoid relying on one public endpoint for critical or high-volume applications.

Is Free Protocol legit, and who operates it?

Free Protocol identifies Etox as the operator, and describes Etox as blockchain RPC infrastructure. That gives users a named operating organisation, but it does not by itself establish the service’s track record. Free Protocol does not publish a launch date, named team, uptime history or independent audit in its service information. Its homepage advertises endpoints for four networks and includes a live traffic display, but a status indicator is not a substitute for a published service-level guarantee. The service may be legitimate and useful, yet there is limited public information to judge its longevity and operational reliability. For a production application, check the status page and consider a fallback provider rather than depending on one endpoint.

How much does Free Protocol cost?

Free Protocol’s public endpoints are free and require no signup, API key or payment card. The published limit is 10 requests per second, with a burst of 20, plus 333,333 compute units (CU) per day and 10 million per month, measured per client IP (or IPv6 /64). A CU is a usage unit; different RPC methods consume different amounts, so the daily CU cap is not the same as a fixed number of calls. For example, the site gives costs of 10 CU for eth_blockNumber and 75 CU for eth_getLogs. Users who need more can sign up for Etox Free, which advertises 30 million CU per month. Etox Pro is advertised from $49 per month; confirm current plan terms before relying on them.

How do you connect a wallet or app to Free Protocol?

To use Free Protocol, select the relevant network and copy its endpoint into a compatible wallet, app or developer tool. The service provides endpoints for Ethereum, Base, Polygon and Arbitrum One, along with sample code for common development libraries and command-line requests. In a wallet such as MetaMask, add the network and enter its RPC URL, checking that the chain and network details match the official network information. A wallet uses the endpoint to fetch blockchain data and broadcast signed transactions; Free Protocol does not sign transactions for you. Test with low-risk, read-only requests first. If an app asks you to connect or sign, verify what the signature does before approving it.

What are Free Protocol’s request limits?

The public endpoints have a stated limit of 10 requests per second, with a burst allowance of 20, and a daily and monthly CU cap per client IP. If the limit is exceeded, Free Protocol says JSON-RPC requests return HTTP 429 with an error message. Heavy methods consume more CU than simple lookups, so applications that poll frequently or fetch large event logs may hit the cap sooner than expected. The service does not require an API key for this public tier, but that also means the allowance is tied to the connecting IP rather than a personal account dashboard. If the endpoint is too limited, Etox offers a signup-based free tier with higher usage and a dashboard; its exact higher daily cap is not published in the service information.

Can you deposit or withdraw money through Free Protocol?

You do not deposit money into Free Protocol, and the service does not offer withdrawals: it is an RPC connection, not an exchange or account holding a balance. Using its public endpoints does not require payment details. If you use the separate Etox signup-based plans, check the plan’s current billing and cancellation terms before adding payment information; the public service information gives a starting Pro price but not full billing terms. Crypto sent through a wallet remains subject to the blockchain transaction you approve, including network fees, and cannot be reversed by changing RPC providers. Free Protocol does not publish KYC requirements for Etox accounts. Never send funds to an address or approve a transaction merely because an app connected through this RPC asks you to.

Before you deposit: a quick checklist

  • Confirm the endpoint matches the intended chain: Ethereum, Base, Polygon or Arbitrum One.
  • Keep a trusted backup RPC for outages or important balance checks.
  • Review the transaction or signature in your wallet; the RPC provider does not validate the app’s intent.
  • Monitor CU usage if you make frequent calls, especially eth_getLogs or other heavier methods.

5 steps

How to get started with Free Protocol

  1. 1

    Choose the required chain and copy its Free Protocol RPC endpoint.

  2. 2

    Check the network details against the chain’s official information before adding it to a wallet.

  3. 3

    Start with a read-only request or low-risk test.

  4. 4

    Review any transaction or signature in your wallet before approving it.

  5. 5

    Set up a backup RPC and monitor CU use if you depend on the service.

Plain English

Jargon explained

JSON-RPC
A standard way for a wallet or app to request blockchain data or submit a transaction.
Compute unit (CU)
A usage measure; different blockchain requests consume different amounts.
eth_call
A request that reads or changes data on a blockchain contract.

Quick answers about Free Protocol

Can developers test Free Protocol without installing anything?

Yes. The service provides sample requests and code for tools including ethers.js, viem, web3.py and Go, as well as a browser-based request tester.

What happens if a Free Protocol request limit is exceeded?

Free Protocol says that exceeding the public endpoint limit returns HTTP 429 with an error message. Reduce request frequency or check whether a higher-usage Etox plan fits your needs.

Which networks does Free Protocol support?

Free Protocol supports Ethereum, Base, Polygon and Arbitrum One. The service does not advertise endpoints for other networks in its public offering.

Compare

Free Protocol alternatives

All alternatives
Demeter logo

Demeter

Infrastructure

Score 7.6 out of 10

Demeter provides managed APIs for Cardano dApps; its open-source components and metered pricing make it worth a look, with hosted-service risks to weigh.

TVL $282K−0.7%BNB Chain · HECO · Cardano
Cometh logo

Cometh

Infrastructure

Score 5.4 out of 10

Cometh provides DeFi infrastructure APIs for businesses; it merits due diligence before trust because pricing, audits and custody terms are not public.

TVL $33.2K−10.1%Polygon
Chronicle logo

Chronicle

Infrastructure

Score 6.8 out of 10

Chronicle provides oracle data and asset verification for blockchain apps; it has audits, but pricing and some risks need checking.

TVL $0Aurora · Ethereum · Arbitrum +8

Chainlink

Infrastructure

Score 6.6 out of 10

Chainlink connects smart contracts to external data and other blockchains; its broad use is notable, but app-level risks remain.

Ethereum
Getblock logo

Getblock

Infrastructure

Score 7.0 out of 10

GetBlock sells blockchain nodes and data APIs for developers; its free tier is worth testing, but check usage costs and service terms.

Bitcoin · XRP Ledger · Ethereum +3
Edgevana logo

Edgevana

Infrastructure

Score 5.2 out of 10

Edgevana sells AI infrastructure and GPU services; it may suit businesses, but pricing and public security details are limited.

TVL $39.1K−16.7%Solana

Same category

More Infrastructure dApps

Infrastructure rankings

Quicknode

Infrastructure

Score 6.8 out of 10

Quicknode is a blockchain infrastructure platform for developers, worth considering for RPC and data tools but with pricing and audit details to check.

Solana
Pyth Network logo

Pyth Network

Infrastructure

Score 6.2 out of 10

Pyth Network supplies market prices to blockchain apps and institutions; useful infrastructure, but check each feed and integration carefully.

TVL $0Solana
Modak logo

Modak

Infrastructure

Score 6.1 out of 10

Modak is an enterprise data engineering company, not a crypto app; it may suit businesses, but verify costs and security terms.

Nownodes logo

Nownodes

Infrastructure

Score 6.1 out of 10

NOWNodes provides blockchain node APIs for developers; it is worth testing, but verify its pricing, security and chain support first.

Shibarium
Drpc logo

Drpc

Infrastructure

Score 6.0 out of 10

dRPC provides managed and self-hosted blockchain RPC infrastructure; it is useful for developers, but check its security and billing terms first.

Ethereum · BNB Chain · Polygon +18
Geodnet logo

Geodnet

Infrastructure

Score 5.9 out of 10

GEODNET sells RTK correction access for precise positioning; its practical service is worth checking, but token and audit details need care.

Solana

Same chain

More on Ethereum

Ethereum rankings
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.29B−13.4%Ethereum · Base · Arbitrum +38
Lido logo

Lido

Staking Pool

Score 7.1 out of 10

Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.

TVL $17.8B−14.9%Ethereum · Solana · Terra +2
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.1B−9.2%Ethereum · Base · Arbitrum +18
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $719M−16.7%Ethereum · Base · Polygon +14
Ethereum Finance logoScore 7.1 out of 10

Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.

Ethereum
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2

Where the answers come from

Sources

No public sources were recorded for this page.

Last checked . Something wrong or out of date? Let us know and we will fix it.