FILLiquid Review: Is It Safe to Stake FIL?
FILLiquid is a Filecoin staking and lending protocol where FIL deposits are represented by FIT. Its limited public security, fee and withdrawal disclosures call for careful checks before depositing.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
FILLiquid may suit Filecoin holders who understand DeFi lending and are comfortable checking contract and redemption risks. It offers a stated route to deposit FIL and receive FIT, but its public safety disclosures, fees and withdrawal terms are limited. The FIT-versus-FIG discrepancy is another reason to verify token contracts and documentation carefully before committing funds.
Our verdict:Use with caution5.0/10
HelpfulCoin report card
Use with caution5.0/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- F (3.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- – (not graded)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- D (4.0 out of 10)
- ReputationHow established and openly run it is.
- D (4.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
FILLiquid at a glance
- Category
- Staking
- Product
- Filecoin staking and lending protocol
- Main asset
- FIL
- Receipt token
- FIT; FIG is also identified
- Chains
- Filecoin; BNB Chain role unclear
- Audit
- No public audit disclosed
- Fees
- Not published
- Value locked
- $153K−20.6% 7d
- Last checked
Green flags and red flags
Reassuring
- FILLiquid documents a specific FIL deposit and FIT redemption model.
- The protocol’s stated purpose and intended users—FIL holders and Filecoin storage providers—are identifiable.
- FILLiquid has documentation for its staking feature and FIT token.
Be careful about
- FILLiquid does not disclose a public smart-contract audit.
- Public fee, yield and withdrawal terms are incomplete.
- The project’s token is identified as both FIT and FIG, so verify contracts carefully.
- The project does not clearly identify its operators or disclose a licence.
What is FILLiquid and what can you do with it?
FILLiquid is a Filecoin-focused staking and lending protocol that lets FIL holders deposit into a pool and receive FIT, a token representing their deposited value. The pool is described as lending FIL to Filecoin storage providers, who can borrow liquidity. In principle, this gives depositors a way to earn income while holding a claim used for FIL redemption. That is different from simply keeping FIL in a personal wallet: deposited assets are exposed to the protocol’s contracts and lending arrangements. FILLiquid’s public description does not give enough detail to verify how lending decisions, returns or losses are managed. It is therefore best understood as a DeFi lending product with a liquid-staking-style receipt token, not a risk-free savings account.
Is FILLiquid safe to stake FIL on?
FILLiquid carries material risks, and its public safety disclosures are limited. Depositing FIL means relying on smart contracts and on the pool’s ability to manage lending and redemption; contract bugs, exploits, poor loan performance or liquidity shortages could put funds at risk. FILLiquid does not disclose a public audit, and no licence or security incident history is established by its published product details. That does not prove a vulnerability or incident, but it leaves important checks unanswered. The protocol’s described receipt token is FIT, while the project classification also identifies FIG, so confirm the exact token and contract through FILLiquid’s official documentation before interacting. Consider using only funds you can afford to lose, and do not treat displayed pool value or a receipt token as a guarantee of repayment.
Is FILLiquid legit, and who runs it?
FILLiquid is an identifiable, active Filecoin DeFi project, but the information available about its operators and track record is not enough to call it strongly established. Its documentation describes staking and a FIT receipt token, and third-party coverage describes a lending market serving Filecoin storage providers. The project’s public-facing information does not identify a responsible team, disclose a licence, or provide a clear record of operating history and incidents. FILLiquid has been tracked since July 2024, but that date alone does not establish how long the live product has operated. These gaps make independent verification important: check the current official documentation, contract addresses and any published security or governance disclosures before depositing. A working dapp and written product description are useful, but they are not substitutes for transparent operators or an audit.
What fees does FILLiquid charge?
FILLiquid’s deposit, withdrawal and borrowing fees are not published about the product, so the total cost cannot be calculated in advance from its public description. A transaction on Filecoin also uses network fees, which are separate from any protocol charge. If lending generates income, the amount a depositor receives may depend on pool use and the protocol’s distribution rules; FILLiquid does not publish a dependable rate or complete fee schedule in its product description. Do not assume that an advertised or displayed yield is fixed, or that it is the amount you will receive after costs. Before signing a transaction, check the dapp’s current fee and reward terms, the amount of FIL you will receive on redemption, and the transaction details in your wallet. If those terms are not clear, wait rather than approve blindly.
How does FILLiquid staking work?
FILLiquid’s stated process is to deposit FIL into its liquidity pool, after which the protocol mints FIT according to a real-time exchange rate. FIT is described as proof of a depositor’s share and is intended to support profit distribution and FIL redemption. The protocol’s lending model is described as making pool liquidity available to Filecoin storage providers. That means a depositor’s eventual outcome can depend on both the contract and the pool’s lending and redemption conditions. The public description does not specify a guaranteed return, a complete reward formula, or all the steps for unstaking. To get started, use the official FILLiquid app and documentation, verify the contract and network before connecting a wallet, and review each transaction before signing. Never share a recovery phrase or sign an unexplained approval.
How do you deposit and withdraw from FILLiquid?
FILLiquid describes FIL deposits and redemption through FIT, but it does not publish enough detail to establish withdrawal timing, limits, lockups or whether redemption can always happen immediately. Withdrawals from a lending pool can depend on available liquidity and the protocol’s rules; a receipt token is not itself a promise that FIL will be available on demand. Before depositing, find the current redemption instructions in FILLiquid’s official documentation and check whether a waiting period, minimum amount or fee applies. For deposits, confirm that the dapp is asking for the intended FIL amount and that the transaction is on the correct network. FILLiquid’s product description does not set out KYC requirements or deposit and withdrawal limits. Do not send FIL directly to an address unless the official instructions explicitly require it.
Is FILLiquid’s token FIT or FIG?
There is a token-symbol discrepancy to resolve before interacting with FILLiquid. The protocol description calls FIT the receipt token minted when users deposit FIL, while the project classification identifies FIG as its token. Public sources do not establish whether FIG is a separate token, a renamed asset or an outdated label. Token symbols are not unique, so searching by ticker alone can lead to a different asset or a counterfeit contract. Use FILLiquid’s official documentation to verify the exact token name, contract address, network and purpose, and compare those details with the transaction shown in your wallet. Do not rely on a search result or a token’s logo. Until FILLiquid clearly explains the relationship between FIG and FIT, treat the discrepancy as an important verification issue rather than assuming the two names refer to the same asset.
Before you deposit: a quick checklist
- Verify the official app domain and the Filecoin contract addresses against FILLiquid’s documentation.
- Resolve the FIT-versus-FIG token discrepancy before approving any token or contract.
- Check current redemption, lockup, fee and reward terms before depositing FIL.
- Confirm your wallet is on the intended network and read each transaction before signing.
5 steps
How to get started with FILLiquid
- 1
Open FILLiquid’s official app and compare its domain with the official documentation.
- 2
Verify the Filecoin network and contract addresses, including whether the receipt token is FIT or FIG.
- 3
Read the current deposit, reward, fee and redemption terms before connecting a wallet.
- 4
Connect a wallet without sharing its recovery phrase, then review the exact transaction details before signing.
- 5
Keep transaction records and confirm how to redeem FIT for FIL before depositing a meaningful amount.
Plain English
Jargon explained
- Liquid-staking token
- A token representing a deposit or share in an underlying pool; its value and redemption depend on the protocol.
- Smart contract
- A self-executing program on a blockchain that can hold or move assets according to its code.
- Liquidity
- The ability to turn an asset or claim into cash or the underlying asset without a long wait or large loss.
Quick answers about FILLiquid
Does FILLiquid support BNB Chain?
FILLiquid is described as Filecoin-focused. Although BNB Chain is also tagged for the project, its role in the product is not clear from the published description; verify network support before connecting.
How much can you earn with FILLiquid?
FILLiquid does not publish a reliable fixed yield in its product description. Any return may depend on pool lending activity and the protocol’s distribution rules, and is not guaranteed.
Which wallets work with FILLiquid?
The public product description does not identify supported wallets. Check the official app and documentation for wallet compatibility, and never enter your recovery phrase into a dapp.
Compare
FILLiquid alternatives
Binance staked ETH issues WBETH for staked ETH and rewards; it may suit Binance users, but redemption and custody risks matter.
Stader is a non-custodial liquid staking platform; it may suit DeFi users, but pool fees, audits and withdrawal terms need checking.
Ankr offers Web3 infrastructure and liquid staking; it may be useful, but check each product's fees, custody and withdrawal terms.
GLIF offers yield-bearing tokens for infrastructure assets; it is worth examining cautiously because audit and withdrawal details are unclear.
Parasail is a DePIN restaking protocol, but unclear custody, fee, and withdrawal terms make it a cautious prospect.
SSV Network distributes Ethereum validator duties and offers SSV staking, but variable rewards and staking risks make careful checks essential.
Same category
More Staking dApps
Laine SOL offers native and liquid Solana staking, with a stated 0% pool fee but added risks for laineSOL holders.
wstETH is Lido’s wrapped stETH token for Ethereum DeFi, but it carries staking, smart-contract and market risks.
Lido is an Ethereum liquid-staking protocol governed by Lido DAO; it offers stETH for staked ETH, with contract, validator and liquidity risks.
Jito Liquid Staking issues JitoSOL for staked SOL, with variable staking and network rewards; check fees, risks and exits first.
ether.fi Stake is a non-custodial ETH staking protocol worth researching, but fees, exit timing and smart-contract risks need careful checking.
Marinade offers Solana staking with native SOL or mSOL; it is worth considering if you understand the fee and smart-contract risks.
Same chain
More on Filecoin
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
OKX is a large centralized crypto exchange with varied trading tools; check custody, fees and regional rules before depositing.
Gate is a long-running centralized exchange with extensive crypto markets, but custody and proof-of-reserves limitations merit caution.
Bitget is a centralized crypto exchange with derivatives and stock-related products; its reserve claims are useful, but verify custody and terms.
SushiSwap V3 is a multichain crypto exchange; it is worth considering cautiously, with contract, fee and wallet risks in mind.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.