Skip to content
HelpfulCoin

Is Enosys AMM V3 Safe? Fees, Risks and How It Works

Enosys AMM V3 is a concentrated-liquidity decentralized exchange on Flare and Songbird. It supports token swaps and liquidity provision, but specific fees and an AMM V3 audit are not identified.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

Enosys AMM V3 may suit experienced DeFi users who want to swap tokens or provide concentrated liquidity on Flare or Songbird. The project describes a self-custodial DEX and says code and audits are public, but no AMM V3-specific audit, fee schedule or reward terms are identified. Check contracts, pool depth and costs carefully, and approach Songbird as a market-testing network.

Our verdict:Use with caution5.2/10

HelpfulCoin report card

Use with caution

5.2/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
D (4.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
D (5.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
D (5.0 out of 10)
ReputationHow established and openly run it is.
D (5.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Enosys AMM V3 at a glance

Category
DEXes
Product
Concentrated-liquidity decentralized exchange
Chains
Flare and Songbird
Trading
Token swaps and liquidity provision
Token
EXFI is associated with the project
Audit
No AMM V3-specific report identified
Value locked
$3.71M−36.9% 7d
Last checked

Green flags and red flags

Reassuring

  • Enosys describes AMM V3 as self-custodial, with users interacting through their own wallets.
  • Enosys says its code and audits are public, although an AMM V3-specific audit is not identified.

Be careful about

  • No AMM V3-specific audit report or auditor is identified, despite Enosys’s general statement that audits are public.
  • AMM V3 swap fees, pool fee tiers and reward conditions are not published in the project details provided.
  • Enosys describes Songbird as a live market-testing network, so treat products there as experimental.

What is Enosys AMM V3 and what can you do with it?

Enosys AMM V3 is a decentralized exchange (DEX) for swapping tokens and providing liquidity on Flare and Songbird. Enosys describes it as a concentrated-liquidity market maker: liquidity providers choose price ranges for their funds rather than spreading them across all possible prices. Enosys also says liquidity providers can earn rewards, including L1 rewards, but does not publish AMM V3 reward rates in the project details provided here. The DEX is part of Enosys, a broader DeFi suite that includes lending, farming and a bridge. Its associated token is EXFI, but that does not establish that EXFI is required to swap or provide liquidity. Like other on-chain exchanges, using it means signing transactions with a crypto wallet and interacting with smart contracts. The project describes its products as self-custodial, but funds committed to a liquidity pool are subject to the pool contract and market risks.

Is Enosys AMM V3 safe to use?

Enosys AMM V3 carries smart-contract and trading risks, and the available security details are not enough to treat it as low risk. Enosys says audits and code are public, but no specific AMM V3 audit report or auditor is identified. Check the actual contract and audit information before approving tokens or depositing liquidity. A DEX does not hold funds in a conventional customer account: your wallet signs transactions, while tokens supplied to a pool are controlled by its smart contracts. A contract flaw or exploit can put those funds at risk. Concentrated liquidity also brings impermanent loss, the possibility that your pool position ends up worth less than simply holding the tokens as their prices move. Enosys says Songbird is its live market-testing network for new developments, which is a reason to be especially careful when using that network. No incident history is described, so do not read the absence of a named incident as proof of a clean security record.

Is Enosys AMM V3 legit, and who runs it?

Enosys appears to be a real DeFi project with a suite of products on Flare and Songbird, but the public details do not establish a long, independently documented track record for AMM V3. The project describes itself as a blockchain research and development lab and says its team includes scientists and engineers; it does not name the people running AMM V3. Its website copyright runs from 2021 to 2026, but that alone does not prove when this particular exchange launched or how long it has operated. Enosys also describes Songbird as its live market-testing platform, so some products may be used experimentally. Treat “legit” as separate from “safe”: a genuine project can still have vulnerable contracts, thin liquidity or unclear fees. Before using it, verify that you have the official Enosys interface and the correct network and contract addresses, and review the project’s current documentation and any AMM V3-specific audit report.

What are Enosys AMM V3’s swap and liquidity fees?

Enosys does not publish AMM V3’s swap-fee schedule, pool fee tiers or liquidity-provider reward rates in the project details provided. As with other automated market makers, a swap may incur a pool trading fee, and each on-chain transaction also requires network gas paid in the network’s native token. The specific pool fee can matter, so check it in the interface before confirming a trade rather than assuming a rate. Providing liquidity can involve extra transactions, such as creating or adjusting a position, each with its own gas cost. Concentrated-liquidity positions may also need attention as prices move; fees earned are not guaranteed to offset price changes or transaction costs. Enosys advertises L1 rewards for liquidity providers, but does not state the amount, eligibility conditions or duration for AMM V3. Compare the expected costs and pool depth with the amount you plan to trade, especially for a small transaction where gas can make up a larger share of the total.

How do you use Enosys AMM V3?

To use Enosys AMM V3, you need a compatible crypto wallet, tokens on the network you intend to use and enough of that network’s native token to pay gas. Connect only through an interface you have verified as belonging to Enosys, then confirm that the wallet is on Flare or Songbird as intended. For a swap, select the tokens and check the quoted output, price impact and slippage tolerance before signing. Slippage is the difference between the expected and final trade price. For liquidity, choose a pool and understand its price range and token amounts before approving or depositing funds. In a concentrated-liquidity pool, your position may stop earning trading fees when the market price moves outside your chosen range. Start with a small transaction if you are unfamiliar with the interface, and never sign a wallet prompt you do not understand. Enosys does not publish AMM V3-specific setup requirements in the project details provided, so verify token and network compatibility before sending funds.

How do deposits, withdrawals and KYC work on Enosys AMM V3?

Enosys AMM V3 uses wallet transactions rather than a conventional deposit into a centralized exchange account. To trade, you need the relevant tokens already available in your wallet on Flare or Songbird; to provide liquidity, you approve and supply tokens to a pool contract. You can remove liquidity through the relevant position controls, subject to the contract and interface working as intended, then pay network gas to move or swap tokens elsewhere. Enosys does not publish withdrawal limits, transaction processing times or an AMM V3-specific KYC policy in the project details provided. On-chain use normally requires a wallet rather than a custodial account, but that does not mean there are no legal or access restrictions. Check the current interface and terms for any requirements before connecting. A transaction may fail or take longer if the network is congested, and the amount you receive when withdrawing liquidity can vary with token prices and pool conditions. Keep enough native network token for gas when planning to exit.

How does concentrated liquidity work on Enosys AMM V3?

Yes, Enosys AMM V3 supports concentrated liquidity, which lets a liquidity provider choose a price range for their tokens. This can make capital more active within that range, but it adds management and loss risks compared with a pool that spreads liquidity across all prices. If the market price moves outside the selected range, the position may stop earning swap fees until the price returns or the position is adjusted. Meanwhile, the position’s token mix can change as traders swap against it; this can leave its value below what holding the original tokens would have been. Enosys says liquidity providers can also take advantage of L1 rewards, but it does not publish the AMM V3 reward rates or conditions in the project details provided. Check the pool’s current liquidity, fees, reward rules and price range before committing funds. Do not treat advertised rewards as a guaranteed return or as protection against price movements, contract bugs or loss of liquidity.

Before you deposit: a quick checklist

  • Verify the Enosys interface and the Flare or Songbird contract addresses before connecting your wallet.
  • Look for an AMM V3-specific audit report; Enosys’s general statement about public audits does not identify one.
  • Check the pool fee, liquidity depth, slippage and any reward conditions before trading or providing liquidity.
  • Keep native tokens aside for gas, and consider testing with a small transaction first.

4 steps

How to get started with Enosys AMM V3

  1. 1

    Confirm you are using the official Enosys interface and verify the network and contract addresses before connecting your wallet.

  2. 2

    Choose Flare or Songbird, then check that your wallet holds the correct tokens and enough native tokens for gas.

  3. 3

    Review the pool fee, liquidity depth, slippage and any reward conditions; start with a small swap if you are new to the interface.

  4. 4

    For liquidity, understand the selected price range and how to remove your position before approving or supplying tokens.

Plain English

Jargon explained

Self-custody
The wallet signs transactions, while smart contracts control tokens committed to a pool.
Concentrated liquidity
A pool design where liquidity providers choose the price range for their funds.
Slippage
The difference between a trade’s expected price and the price it executes at.

Quick answers about Enosys AMM V3

Do you need EXFI to use Enosys AMM V3?

The project identifies EXFI as an associated token, but does not say that EXFI is required to swap or provide liquidity on AMM V3. Check the pool and transaction requirements in the interface before proceeding.

Can you use Enosys AMM V3 on a phone?

Enosys does not specify an AMM V3 mobile app in its product details. A compatible mobile wallet may be able to connect to a web interface, but verify the interface and transaction prompts before signing.

Is Enosys AMM V3 available in every country?

Enosys does not publish AMM V3-specific country restrictions in the project details provided. Check local rules and the project’s current terms before using a crypto service, and remember that laws can differ by location.

Compare

Enosys AMM V3 alternatives

All alternatives
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.29B−13.4%Ethereum · Base · Arbitrum +38
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.05B−10.1%Ethereum · Robinhood Chain · Base +19
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $719M−16.7%Ethereum · Base · Polygon +14
PumpSwap logoScore 5.7 out of 10

PumpSwap is a Solana DEX linked to Pump.fun; it may suit experienced traders, but memecoin, liquidity, and audit risks warrant caution.

TVL $251M−16.5%Solana
SparkDEX V4 logoScore 5.5 out of 10

SparkDEX V4 is a Flare DEX for swaps, liquidity and perpetuals, but limited audit and operator transparency call for caution.

TVL $10.7M−19.8%Flare
PancakeSwap AMM V3 logoScore 6.6 out of 10

PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.

TVL $643M−4.3%BNB Chain · Ethereum · Base +8

Same category

More DEXes

DEXes rankings
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2
Stellar DEX logoScore 6.8 out of 10

Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.

TVL $12.8M−4.0%Stellar
Pancakeswap logoScore 6.8 out of 10

PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain
SushiSwap logoScore 6.5 out of 10

SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.

TVL $30.5M−11.1%Ethereum · Polygon · Arbitrum +32
Minswap DEX logoScore 6.5 out of 10

Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.

TVL $11.9M−4.4%Cardano
Pancakeswap Token logoScore 6.5 out of 10

PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain · Ethereum

Same chain

More on Flare

Flare rankings
LayerZero V2 logoScore 6.1 out of 10

LayerZero V2 is cross-chain messaging infrastructure; it is worth a look, but app-specific fees and security need checking.

TVL $16.8B+1.2%Polygon · Ethereum · ApeChain +76
Morpho Blue logoScore 6.1 out of 10

Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.

TVL $10.1B−7.0%Ethereum · Base · Robinhood Chain +41
Gate logo

Gate

Centralized Exchanges

Score 5.9 out of 10

Gate is a long-running centralized exchange with extensive crypto markets, but custody and proof-of-reserves limitations merit caution.

TVL $5.19B−10.1%Ethereum · Bitcoin · BNB Chain +129
USDT0 logo

USDT0

Bridge

Score 5.8 out of 10

USDT0 moves Tether assets across supported chains, but bridge and contract risks make small test transfers and careful checks important.

TVL $3.62B+10.1%Ethereum · Arbitrum · Avalanche +26
Clearstar logo

Clearstar

Risk Curators

Score 5.8 out of 10

Clearstar advises organisations on DeFi risk and curation; it may be worth considering, but verify its controls, custody and fees first.

TVL $158M−10.0%Flare · Base · Ethereum +8
Lagoon logo

Lagoon

Onchain Capital Allocator

Score 5.8 out of 10

Lagoon provides infrastructure for curator-run crypto vaults; compare each vault’s fees, strategy and withdrawal terms before depositing.

TVL $148M−4.6%Ethereum · Arbitrum · Base +19

Where the answers come from

Sources

  1. defillama.com/protocol/enosys-amm-v3(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.