Skip to content
HelpfulCoin
EmpireDEX logoDEXesAppears inactive

EmpireDEX Review: Is This DEX Safe to Use?

EmpireDEX is a documented multi-chain DEX for token swaps and liquidity pools, but it is marked inactive. Treat it as unsuitable for new deposits unless you independently verify that its contracts and withdrawal routes work.

Researched and written by the HelpfulCoin teamChecked 10 questions answered

The short answer

EmpireDEX may interest people researching older multi-chain DEX deployments, but it is not a sensible choice for new funds while marked inactive. Its documentation explains wallet-based swaps and a 0.3% fee, yet no audits are listed and current operation or withdrawal access is not assured. Verify contracts and exit routes before interacting; if you cannot do that independently, do not connect a funded wallet.

Our verdict:Avoid3.5/10

HelpfulCoin report card

Avoid

3.5/ 10 overall

Serious problems, or it no longer works.

SafetyHow funds are held, audits, licence, incidents.
F (2.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
C (6.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
F (3.0 out of 10)
ReputationHow established and openly run it is.
F (2.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

EmpireDEX at a glance

What it is
Multi-chain decentralized exchange
Status
Marked inactive
Chains
BNB, Cronos, Ethereum, Gnosis, Avalanche, Fantom, Polygon, Kava
Token
EMPIRE; other deployments use different tickers
Swap fee
0.3% documented
Audit
No audits listed
Custody
Documentation describes it as non-custodial
Value locked
$2.25M−12.9% 7d
Last checked

Green flags and red flags

Reassuring

  • The documentation describes wallet-based, non-custodial exchange functions.
  • The swap fee and its stated allocation are documented.
  • The documentation identifies supported wallet options and separate deployments by network.

Be careful about

  • EmpireDEX is marked inactive, so current trading and withdrawal access may not work.
  • No audits are listed, and the operator team and security history are not published.
  • Deployments use different token tickers, increasing the risk of choosing the wrong asset or network.

What is EmpireDEX and what can you do with it?

EmpireDEX is a multi-chain decentralized exchange (DEX) for swapping tokens and providing liquidity. Its documentation also describes yield farming, staking pools, and a stablecoin vault. The exchange is designed to be non-custodial: users connect a crypto wallet and interact with smart contracts rather than opening a conventional exchange account. EmpireDEX is marked inactive, however, so its documentation should not be taken as evidence that swaps or withdrawals currently work. Do not send funds or approve tokens until you have verified that the relevant app and contracts are live and that you can exit a position. The documentation names BNB Chain, Cronos, Ethereum, Gnosis, Avalanche, Fantom, Polygon, and Kava, but each network may have a separate EmpireDEX deployment and token. That makes checking the correct network and contract especially important.

Is EmpireDEX safe to use?

EmpireDEX is not a low-risk place to put funds, especially while it is marked inactive. Its documentation describes the exchange as non-custodial, which means users interact with smart contracts from their own wallets; it does not remove the risks of contract bugs, malicious approvals, or unavailable liquidity. No audits are listed for EmpireDEX, and no incident history or current security status is published. The project describes liquidity as permanently locked for its “weaponized liquidity” feature, but that is not the same as a security audit or a guarantee that you can withdraw your own liquidity. If you already have funds in a pool, check the contract and network carefully before interacting, and never share a seed phrase. Treat any unexpected site, token, or request to grant broad wallet permissions as a potential scam.

Is EmpireDEX legit or still operating?

EmpireDEX has a project documentation site describing its exchange features and token model, and the documentation says it originally launched on BNB Chain. Those details establish what the project set out to do, but they do not establish who currently operates it or whether the exchange is still maintained. The operator team, company details, regulatory status, and public support arrangements are not published. The documentation carries a 2021 copyright notice, which shows the materials date back several years, but age alone is not a measure of reliability. EmpireDEX is marked inactive, and no audits are listed. Taken together, that makes its present-day track record difficult to assess. It may be a real protocol with historical deployments, but there is not enough evidence to treat it as a currently supported or dependable venue for new funds.

What fees does EmpireDEX charge?

EmpireDEX documents a 0.3% fee on swaps. It allocates 0.25% to liquidity providers and directs 0.05% to a stablecoin vault, where it is used for EMPIRE/COIN liquidity providers. The documentation does not publish a separate fee schedule for adding or removing liquidity, staking, or farming, so check the transaction details before signing anything. You also pay the blockchain’s network fee, commonly called gas, for swaps and other contract interactions; that charge is separate from EmpireDEX’s swap fee and varies by network. The total cost can also be affected by the price impact of a trade, meaning how much the trade moves the pool price. Because EmpireDEX is marked inactive, do not assume the documented fee split is currently functioning or that a displayed quote is reliable. Check the final wallet confirmation and the pool’s liquidity before proceeding.

How do you use EmpireDEX?

EmpireDEX is intended to work through a compatible wallet, with its documentation naming MetaMask, Trust Wallet, and WalletConnect. In normal DEX use, you select the correct network, connect your wallet, choose the tokens and amount, review the quote, and approve or sign the transaction. Providing liquidity or staking requires additional contract transactions and carries different risks from a simple swap. Since EmpireDEX is marked inactive, these steps are not a recommendation to connect or trade: first verify that the official interface and the relevant contracts are operational and trustworthy. Check the contract address independently, confirm the wallet is on the intended chain, and read the token approval amount before signing. Never enter your recovery phrase into a website. If the interface is unavailable or transactions fail, do not try an unfamiliar replacement site claiming to be EmpireDEX.

How do EmpireDEX deposits and withdrawals work?

EmpireDEX does not publish fiat deposit or withdrawal services; its documented model is wallet-based token swaps and liquidity positions. To trade, a user would ordinarily need the relevant token on the correct supported network, plus that network’s native token to pay gas. A liquidity provider would add tokens to a pool and later need to remove liquidity through the relevant contract, if that function and interface remain available. EmpireDEX’s inactive status makes that last point a real concern: do not assume you can withdraw simply because the documentation describes a non-custodial exchange. No withdrawal limits, processing times, or official recovery process are published. The documentation does not describe a KYC process; that does not guarantee that every related service or interface will avoid identity checks. Before adding funds, verify that a small test transaction and an exit are possible on the exact network and pool.

Which chains and tokens does EmpireDEX support?

EmpireDEX documentation names BNB Chain, Cronos, Ethereum, Gnosis, Avalanche, Fantom, Polygon, and Kava. It also explains that deployments on different networks can use different token tickers: EMPIRE is associated with the original BNB Chain deployment, while other deployments use their own names. So EMPIRE should not be assumed to be the correct token for every chain, and a token with the same name or ticker may be unrelated. The documentation also refers to an Empire network, while the chain list above describes the networks in its exchange materials. Before interacting, verify the exact network, token contract, and pool address using trustworthy project documentation and the blockchain explorer for that network. With the exchange marked inactive, avoid relying on old token or pool details without checking that they match a currently functioning contract.

Before you deposit: a quick checklist

  • Treat EmpireDEX as inactive; verify that its official interface and contracts still operate before connecting.
  • Check the exact network, token contract, and pool address; deployments can use different token tickers.
  • Look for an independent audit and verify that it covers the contract you intend to use.
  • Review token approvals and make sure you understand how to remove liquidity before adding funds.

4 steps

How to get started with EmpireDEX

  1. 1

    Do not deposit or approve tokens unless you can independently verify that the official interface and contracts are active.

  2. 2

    Confirm the exact network, token contract, and pool address using trustworthy project documentation and a blockchain explorer.

  3. 3

    Check for an audit covering the specific contract and review the permissions requested by the wallet.

  4. 4

    If you already hold a position, verify the contract’s withdrawal function and test any interaction cautiously before committing more funds.

Plain English

Jargon explained

Liquidity pool
A smart-contract pool that holds tokens so users can swap between them.
Gas
A blockchain transaction fee paid to process an action.
Token approval
A wallet permission allowing a contract to use a specified token amount.

Quick answers about EmpireDEX

Does EmpireDEX require KYC?

No. EmpireDEX documentation describes wallet-based trading and liquidity provision, not a centralized account service. The project does not publish a KYC process.

Is EmpireDEX licensed?

The documentation says the project’s code is under the Apache License, Version 2.0. That is a software licence, not a financial-services or exchange licence.

Does EmpireDEX offer guaranteed yield?

The documentation describes rewards through staking pools and a stablecoin vault, but it does not publish guaranteed returns. Rewards and token values can change, and inactive contracts may not operate as described.

Compare

EmpireDEX alternatives

All alternatives
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.30B−11.9%Ethereum · Base · Arbitrum +38
Uniswap V4 logoScore 7.0 out of 10

Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.

TVL $1.02B−6.7%Ethereum · Robinhood Chain · Base +19
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $720M−13.4%Ethereum · Base · Polygon +14
PancakeSwap AMM V3 logoScore 6.6 out of 10

PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.

TVL $641M−7.5%BNB Chain · Ethereum · Base +8
Fluid DEX logoScore 5.8 out of 10

Fluid DEX is an on-chain swap and liquidity protocol on five networks; it merits a look with careful checks on contracts, fees and risk.

TVL $198M−6.2%Ethereum · Arbitrum · Base +2
PancakeSwap Infinity logoScore 5.8 out of 10

PancakeSwap Infinity is a multichain DEX with multiple pool types; it merits a look, but check fees and contract risks first.

TVL $64.8M−8.6%BNB Chain · Base · Robinhood Chain +1

Same category

More DEXes

DEXes rankings
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2
Stellar DEX logoScore 6.8 out of 10

Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.

TVL $12.7M−4.8%Stellar
Pancakeswap logoScore 6.8 out of 10

PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain
SushiSwap logoScore 6.5 out of 10

SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.

TVL $30.5M−10.8%Ethereum · Polygon · Arbitrum +32
Minswap DEX logoScore 6.5 out of 10

Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.

TVL $12.0M−4.1%Cardano
Pancakeswap Token logoScore 6.5 out of 10

PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain · Ethereum

Same chain

More on BNB Chain

BNB Chain rankings
Demeter logo

Demeter

Infrastructure

Score 7.6 out of 10

Demeter provides managed APIs for Cardano dApps; its open-source components and metered pricing make it worth a look, with hosted-service risks to weigh.

TVL $282K−0.8%BNB Chain · HECO · Cardano
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.0B−8.2%Ethereum · Base · Arbitrum +18
Getblock logo

Getblock

Infrastructure

Score 7.0 out of 10

GetBlock sells blockchain nodes and data APIs for developers; its free tier is worth testing, but check usage costs and service terms.

Bitcoin · XRP Ledger · Ethereum +3
Bitvavo logo

Bitvavo

Centralized Exchanges

Score 6.9 out of 10

Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.

TVL $344M+10.2%Ethereum · Bitcoin · Solana +9
Metamask Swap logo

Metamask Swap

Dex Aggregator

Score 6.9 out of 10

MetaMask Swap routes token trades through providers from a self-custody wallet; it is convenient, but fees and on-chain risks still apply.

Ethereum · BNB Chain
Across logo

Across

Cross Chain Bridge

Score 6.8 out of 10

Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.

TVL $12.9M−13.8%Ethereum · Arbitrum · Optimism +19

Where the answers come from

Sources

  1. defillama.com/protocol/empiredex(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.