Skip to content
HelpfulCoin

Eclipse Bridge Review: Is It Safe and Legit?

Eclipse is an Ethereum layer 2 built to run Solana-style applications, with a bridge for bringing assets onto the network. Its architecture and purpose are clear, but bridge security details, audits, and full fees need closer checking.

Researched and written by the HelpfulCoin teamChecked 9 questions answered

The short answer

Eclipse Bridge may suit users who want to move assets onto an Ethereum layer 2 built for Solana-style applications. Eclipse has documentation and a defined technical purpose, but its audit record, bridge security controls, operator details, and complete fee schedule need checking. Start only after verifying the route and costs, and consider a small test transfer rather than moving a large balance at once.

Our verdict:Use with caution5.4/10

HelpfulCoin report card

Use with caution

5.4/ 10 overall

Real gaps or risks: check them before you deposit.

SafetyHow funds are held, audits, licence, incidents.
D (4.0 out of 10)
CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
D (5.0 out of 10)
Ease of useHow easy it is for a newcomer to start, use and withdraw.
C (6.0 out of 10)
ReputationHow established and openly run it is.
D (5.0 out of 10)

Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.

Eclipse Bridge at a glance

What it is
Ethereum layer 2 using Solana’s SVM
Bridge
Moves assets onto Eclipse
Network
Ethereum
Token
ES; described as Human API’s token
Audits
No audits listed
Fee estimate
$0.0002 per transaction, not guaranteed
Value locked
$3.85M−14.8% 7d
Last checked

Green flags and red flags

Reassuring

  • Eclipse publishes developer documentation describing its network architecture.
  • The project has an official bridge and wallet setup guidance.
  • Eclipse describes Ethereum as part of its security design.

Be careful about

  • No audit record is listed, and bridge custody details are not clear.
  • The advertised transaction fee is an estimate, not a published all-in bridge fee.
  • The project does not provide clear withdrawal limits or timing guarantees.

What is Eclipse Bridge and what can you do with it?

Eclipse is an Ethereum layer 2 blockchain designed to run Solana-style applications, and its bridge is intended to move assets onto the network. A layer 2 processes activity outside Ethereum’s main chain while using Ethereum as part of its security and settlement design. Eclipse describes itself as an SVM L2: SVM means Solana Virtual Machine, the software environment used to run Solana programs. That could appeal to developers building Solana-compatible apps while seeking access to Ethereum assets. For users, the practical starting point is the Eclipse bridge and a compatible wallet. The network also has developer tools and an ecosystem of apps. The site promotes an estimated transaction fee of $0.0002, but that is not a guaranteed all-in bridge cost.

Is Eclipse Bridge safe to use?

Eclipse has risks that are hard to assess fully because it does not publish an audit record, and its bridge custody and security controls are not described in detail. Eclipse’s documentation says the network outsources security to Ethereum, but that does not by itself guarantee that every bridge contract or application is safe. A bridge can expose funds to smart-contract bugs, operational failures, or delays. Treat any transfer as at risk, and consider a small test transaction before moving a larger amount. Eclipse does not publish a licence for the bridge; licensing is not a substitute for technical security in any case. No specific incident information is established by the project material considered for this review, so that should not be taken as proof that no incidents have occurred.

Is Eclipse a legitimate project?

Eclipse is a real blockchain project with an operating website, developer documentation, bridge access, and a trail of ecosystem announcements dating back to 2025. Public reporting also describe the project as a layer 2 focused on using Solana technology. However, the project does not identify the legal company or named people responsible for operating it, and they do not provide enough independent operating history to judge its long-term track record. Eclipse has also promoted an ES token, but its site describes ES as the token for Human API, so its relationship to the Eclipse network should be checked carefully before treating it as a network token. In short, Eclipse is identifiable as a project, but its operator transparency and token details leave questions for users to resolve.

How much does Eclipse Bridge cost?

Eclipse advertises an estimated transaction fee of $0.0002, but this should not be read as a fixed bridge fee or a guaranteed amount you will pay. The final cost can depend on the asset, the route, network conditions, and gas required on the sending or receiving chain. Ethereum gas costs can vary, and bridging may involve more than one transaction. Eclipse does not publish a complete fee schedule for deposits, withdrawals, or bridge service charges in the material considered for this review. Before approving a transfer, check the bridge’s displayed quote and your wallet’s transaction estimate, including which token is needed for gas. If the total cost is unclear, do not approve the transaction until you understand it.

How do you use the Eclipse Bridge?

You can start by setting up a wallet that supports Eclipse, then use Eclipse’s official bridge to select the asset and source network you want to transfer from. Eclipse’s documentation directs users to configure a wallet and bridge assets for gas and transactions. Check the destination network and token carefully before signing; a blockchain transfer may be difficult or impossible to reverse if sent to the wrong place. Review the displayed amount, fees, and any warnings in your wallet. For a first transfer, a small test can help reveal wallet or network issues before you move more. The exact wallet choices, supported tokens, and transfer times should be checked in the current Eclipse interface, since they can change.

How do Eclipse Bridge deposits and withdrawals work?

Eclipse Bridge is designed to bring assets onto Eclipse and to support movement between Eclipse and other networks, but the project does not publish a complete set of withdrawal limits, timing guarantees, or KYC rules in the material considered for this review. In general, a bridge transfer requires a wallet transaction on the sending network and may require another action or transaction to receive funds on the destination network. You will need enough of the relevant gas token to complete the transaction. Check the route and withdrawal instructions shown in the bridge before sending funds, and keep your transaction details until the transfer completes. Eclipse does not describe a custodial account or bank cash-out service; withdrawing to another blockchain is not the same as converting crypto to fiat.

Before you deposit: a quick checklist

  • Confirm the bridge page and wallet connection are genuinely associated with Eclipse before signing.
  • Check the source and destination networks, asset, fees, and gas token in the transaction.
  • Test with a small amount first; bridge transfers may be difficult to reverse.
  • Review the latest security and audit information before transferring funds.

5 steps

How to get started with Eclipse Bridge

  1. 1

    Use Eclipse’s official site and documentation to find the current bridge and wallet instructions.

  2. 2

    Connect a wallet that supports Eclipse, and verify the network shown in the wallet.

  3. 3

    Select the source chain and asset, then review the destination, amount, and estimated fees.

  4. 4

    Make a small test transfer and confirm it arrives before sending more.

  5. 5

    Keep enough of the required gas token for any follow-up transaction.

Plain English

Jargon explained

Layer 2
A blockchain that processes activity outside Ethereum’s main chain while connecting to it for settlement or security.
SVM
The software environment used to execute programs written for Solana.
Gas
The fee paid to process a blockchain transaction.

Quick answers about Eclipse Bridge

What does SVM mean on Eclipse?

SVM means Solana Virtual Machine, the execution environment used to run Solana programs. Eclipse uses it as the basis for its Ethereum layer 2.

Does Eclipse guarantee $0.0002 transaction fees?

The Eclipse site promotes an estimated fee of $0.0002 per transaction, but it does not establish that as a fixed bridge fee or all-in cost. Check the quote and gas estimate before signing.

What is the ES token on Eclipse?

Eclipse promotes ES, but describes it as the token for Human API. Verify the token’s purpose and official contract details before interacting with it.

Compare

Eclipse Bridge alternatives

All alternatives
Base Bridge logo

Base Bridge

Canonical Bridge

Score 6.1 out of 10

Base Bridge moves supported assets between Ethereum and Base; it is official, but check contract risks, fees, and withdrawal delays.

TVL $2.68B−5.8%Ethereum
Arbitrum Bridge logo

Arbitrum Bridge

Canonical Bridge

Score 6.7 out of 10

Arbitrum Bridge moves supported assets between Ethereum and Arbitrum One; it is useful, but check fees and withdrawal delays.

TVL $2.92B−8.3%Ethereum
Polygon Bridge logo

Polygon Bridge

Canonical Bridge

Score 5.6 out of 10

Polygon Bridge moves supported crypto between Ethereum and Polygon, but check its route, fees and security details before transferring.

TVL $2.51B−4.7%Ethereum
Linea Bridge logo

Linea Bridge

Canonical Bridge

Score 5.8 out of 10

Linea Bridge offers several ways to fund Linea, but check route-specific costs and risks before transferring crypto.

TVL $180M−10.1%Ethereum
Optimism Bridge logo

Optimism Bridge

Canonical Bridge

Score 5.5 out of 10

Optimism Bridge is an Ethereum–OP Mainnet gateway, but verify its current official status and risks before bridging.

TVL $441M−8.2%Ethereum · Base · Optimism
Starknet Bridge logo

Starknet Bridge

Canonical Bridge

Score 5.8 out of 10

StarkGate is Starknet's official bridge; it is worth considering for supported routes, but check contract risks, fees, and transfer details first.

TVL $200M−10.1%Ethereum

Same category

More Canonical Bridges

Canonical Bridge rankings
Arbitrum Nova Bridge logo

Arbitrum Nova Bridge

Canonical Bridge

Score 5.9 out of 10

Arbitrum Nova Bridge moves supported crypto between Ethereum and Nova; its official Portal is useful, but check fees, risks and withdrawal timing.

TVL $7.81M−14.7%Ethereum · Arbitrum Nova
Unichain Bridge logo

Unichain Bridge

Canonical Bridge

Score 5.9 out of 10

Unichain Bridge moves crypto onto Unichain, a Uniswap-built Ethereum Layer 2; audit and fee details are limited, so start cautiously.

TVL $2.00M−29.2%Ethereum
RSK Bridge logo

RSK Bridge

Canonical Bridge

Score 5.8 out of 10

RSK Bridge connects Rootstock to Bitcoin and other chains; it may be useful, but verify each route’s provider, fees and risks first.

TVL $72.8M−14.3%Bitcoin · Ethereum · Rsk
Lens Chain logo

Lens Chain

Canonical Bridge

Score 5.8 out of 10

Lens Chain is an active social-focused Ethereum Layer 2, but sparse audit and transfer details make it worth approaching cautiously.

TVL $384K−15.4%Ethereum
Ink Bridge logo

Ink Bridge

Canonical Bridge

Score 5.6 out of 10

Ink Bridge moves assets from Ethereum to Kraken’s Ink Layer 2; it may suit Ink users, but audit and fee details are limited.

TVL $42.1M−15.2%Ethereum
Zircuit logo

Zircuit

Canonical Bridge

Score 5.5 out of 10

Zircuit is an Ethereum-compatible layer-2 with a bridge and yield products; it is worth investigating, but key costs and protections need checking.

TVL $2.02M−13.7%Ethereum

Same chain

More on Ethereum

Ethereum rankings
Uniswap V3 logoScore 7.2 out of 10

Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.

TVL $1.29B−13.4%Ethereum · Base · Arbitrum +38
Lido logo

Lido

Staking Pool

Score 7.1 out of 10

Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.

TVL $17.8B−14.9%Ethereum · Solana · Terra +2
Aave V3 logo

Aave V3

Lending

Score 7.1 out of 10

Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.

TVL $14.1B−9.2%Ethereum · Base · Arbitrum +18
Uniswap V2 logoScore 7.1 out of 10

Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.

TVL $719M−16.7%Ethereum · Base · Polygon +14
Ethereum Finance logoScore 7.1 out of 10

Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.

Ethereum
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2

Where the answers come from

Sources

  1. defillama.com/protocol/eclipse-bridge(opens in a new tab)

Last checked . Something wrong or out of date? Let us know and we will fix it.