Deli Swap Review: Is It Safe to Swap on Base?
Deli Swap is a Base-based crypto swap aggregator that says it routes trades across other aggregators. It is non-custodial by design, but its audit claim and fee details need closer verification.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Deli Swap may suit Base users who want a wallet-based swap aggregator, but it is a cautious choice until its audit reports, fees, and team are easier to verify. Its non-custodial design means it is not meant to hold account balances, but smart-contract and transaction risks remain. Check the quote, contract permissions, and network gas before signing, and do not treat the claimed audits as independently verified.
Our verdict:Use with caution4.8/10
HelpfulCoin report card
Use with caution4.8/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (4.5 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- – (not graded)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- D (5.0 out of 10)
- ReputationHow established and openly run it is.
- F (3.5 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Deli Swap at a glance
- What it is
- Base swap aggregator
- Chain
- Base
- Custody
- Non-custodial, per project description
- Token
- None
- Fees
- Full fee schedule not published
- Audits
- Claims two; reports not named
- Value locked
- $9.46K−7.7% 7d
- Last checked
Green flags and red flags
Reassuring
- Deli Swap is designed for non-custodial wallet swaps rather than account deposits.
- The project says it routes trades across aggregators to seek better prices.
- The project claims two audits, although it does not name the auditors or reports.
Be careful about
- Deli Swap does not name the auditors or publish the reports behind its two-audit claim.
- The project does not publish a clear fee schedule or detailed routing information.
- The team and long-term operating record are not made clear in the project information.
What is Deli Swap and what can you do with it?
Deli Swap is a non-custodial swap aggregator on Base that says it compares routes from other aggregators to seek a better trade price. Instead of holding funds in a Deli Swap account, you connect a crypto wallet and approve a transaction. Deli Swap describes itself as built around Uniswap v4; a separate protocol description calls it a DEX, so its routing and underlying trading infrastructure may both matter. It has no project token. In practice, the main use is swapping supported tokens on Base, with the wallet signing each trade. Deli Swap does not publish a complete list of supported tokens, route sources, or how it chooses between quotes. Check the final quote and transaction details in your wallet before approving: an aggregator’s quoted price can change, and a failed or delayed transaction can still involve network costs.
Is Deli Swap safe to use?
Deli Swap is designed to be non-custodial, but that does not make every swap or contract risk-free. Its site claims the protocol has been audited twice, while the auditors, reports, and audited contract versions are not named in the project information. The protocol data records no audits, so treat the audit claim as unverified until you can inspect the reports and confirm they cover the contracts you will use. A DEX or aggregator can still expose users to smart-contract bugs, malicious tokens, poor execution, or wallet-approval risks. Deli Swap’s reported TVL is small, which is a caution rather than proof of a problem; TVL can change and does not guarantee that trades will execute safely. Use a wallet you control, review what each transaction authorizes, and avoid approving unfamiliar tokens or contracts. Do not risk funds you cannot afford to lose.
Is Deli Swap legit, and who runs it?
Deli Swap appears to be an active Base trading product, but there is not enough public information to judge its operators or long-term track record confidently. The project describes itself as an aggregator of aggregators, and the protocol is tracked as a DEX; its TVL tracking began in January 2026. That short visible history does not establish how long the team has operated or how it has handled past incidents. Deli Swap does not name its team in the project information, and the audit claim lacks named reports or auditors. Those gaps do not prove the project is illegitimate, but they make independent verification harder. Before using it, look for the official contract addresses, inspect any audit reports, and confirm that the app and contracts match the project’s official channels. Treat claims about best pricing as marketing, not a guarantee that every route will beat alternatives.
What fees does Deli Swap charge?
Deli Swap does not publish a clear fee schedule, so the full cost of a trade is not possible to calculate in advance from its published project details. A swap can involve a protocol or route fee, the trading pool’s fee, and Base network gas; the exact amounts depend on the tokens, route, and network conditions. Deli Swap says it routes trades for the best available price, but that does not mean the trade is fee-free or that the quoted output is always the best after all costs. Check the quote, minimum received, and transaction details in your wallet before confirming. Slippage—the difference between the expected and executed price—can also affect the result, especially when markets move or liquidity is limited. If the app does not clearly show the fee and expected output, pause rather than approving the transaction.
How do you swap tokens on Deli Swap?
To use Deli Swap, you need a compatible self-custody wallet connected to Base and enough ETH on Base to pay network gas. Open the official Deli Swap app, connect your wallet, select the token you want to trade and the token you want to receive, then review the quote and transaction before signing. Deli Swap says it searches across aggregators for a route, but does not publish which aggregators it uses or a full guide to its routing logic. Check the tokens’ contract addresses carefully, particularly for lesser-known assets. Review the expected output, any displayed fee, slippage setting, and wallet permissions. A token approval can authorize a contract to spend that token, so only approve what is necessary and revoke unused approvals using a trusted wallet tool. A failed swap may still cost gas, and no route guarantees a profitable trade.
How do you get money out of Deli Swap?
Deli Swap does not work like a custodial exchange account: you connect a wallet and sign swaps, rather than depositing funds into an account that Deli Swap holds for you. Your tokens remain in your wallet unless you approve and execute a transaction. To leave a position, swap the token back through Deli Swap or another service, then use your wallet to send assets wherever you choose. Deli Swap does not publish withdrawal limits or a withdrawal processing time; those terms usually apply to custodial services, not ordinary wallet swaps. You will need ETH on Base for transaction gas, including when moving tokens on-chain. The project’s published information does not specify KYC requirements, so do not assume that the service has none; check its current terms and any requirements shown in the app. Confirm you are using the correct Base network and token addresses before sending funds.
How does Deli Swap use Uniswap v4?
Uniswap v4 hooks are pieces of code that can add rules or actions around a swap or liquidity pool. Deli Swap is described as built on Uniswap v4, and its routing product is presented as an aggregator of aggregators. That combination means the app may find routes across other trading services while relying on on-chain contracts to execute the selected swap. Deli Swap does not publish enough detail to identify every hook, route source, or contract involved in a particular trade. The label “built on Uniswap v4” is not itself an audit or a guarantee that Deli Swap’s own contracts are safe. Before approving a transaction, inspect the token, amount, recipient, and contract interaction in your wallet. If you cannot understand or verify the transaction, do not sign it.
Before you deposit: a quick checklist
- Verify you are using Deli Swap’s official app and the correct Base network.
- Check each token’s contract address; token names and symbols can be copied.
- Review the quote, minimum received, fees, slippage, and wallet approval before signing.
- Ask for the two claimed audit reports and confirm they cover the contracts you will use.
- Keep enough ETH on Base for gas, and start with an amount you can afford to lose.
5 steps
How to get started with Deli Swap
- 1
Confirm the official Deli Swap app and connect a wallet set to Base.
- 2
Keep a small amount of ETH on Base for gas; do not deposit funds into an unfamiliar address.
- 3
Select the tokens and inspect their contract addresses and the quoted output.
- 4
Review fees, slippage, and any token approval in your wallet before signing.
- 5
Start with a small swap and check the completed transaction before making another.
Plain English
Jargon explained
- Aggregator
- A service that searches multiple trading routes to find a swap quote.
- Gas
- The network transaction charge, paid separately from the tokens being swapped.
- Token approval
- A wallet permission allowing a contract to spend a token.
Quick answers about Deli Swap
Does Deli Swap have a token?
No. The project information says Deli Swap has no token. Be cautious of tokens using the name unless their connection to the project is independently verified.
Which blockchain does Deli Swap use?
Deli Swap is identified as a Base product. You need a wallet configured for Base and ETH on Base to pay transaction gas.
Does Deli Swap guarantee the best swap price?
Deli Swap’s description says it routes trades for the best available price, but it does not guarantee the best execution. Compare the final quote and expected output before signing.
Compare
Deli Swap alternatives
ZAMM routes onchain swaps across Ethereum and Base and advertises no swap fee, but security disclosures are limited.
CoW Swap is a non-custodial DEX aggregator with batch auctions; it may help reduce some MEV risks but still carries trading and contract risks.
WardenSwap is an AI-branded DEX aggregator, but unclear fees, operators and audit details make it a cautious choice.
Fibrous routes wallet-based token swaps across several networks; its published fees are clear, but audit and operator details are limited.
3Route routes crypto swaps across DEX liquidity, with a Tezos app and multichain API; it is worth a look if you check fees and transaction details.
Matcha is a 0x-built DEX aggregator for wallet-based swaps; it is useful to compare, but verify fees and transaction risks.
Same category
More Dex Aggregators
MetaMask Swap routes token trades through providers from a self-custody wallet; it is convenient, but fees and on-chain risks still apply.
1inch aggregates decentralized crypto swaps across networks; it is established, but wallet and smart-contract risks still apply.
OpenOcean aggregates crypto swaps across chains; it may help compare routes, but fees and security assurances need careful checking.
Jupiter is a Solana token-swap aggregator; it can simplify trades, but its on-chain and token risks merit caution.
LlamaSwap compares routes from other DEX aggregators; its fees, chain support and audit status need careful checking.
Panora Swap aggregates token-trading routes on Aptos, but its unpublished audit and fee details call for caution.
Same chain
More on Base
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.