Clober Liquidity Vault Review: Is It Safe?
Clober Liquidity Vaults put deposited assets to work in on-chain market-making strategies. A reported 2024 exploit makes checking the affected vaults and remediation essential before depositing.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
Clober Liquidity Vaults may suit experienced DeFi users who understand on-chain market-making and smart-contract risk. But a vault reportedly lost 133 ETH in a 2024 exploit, and the remediation status, audit scope and vault-specific terms are unclear. Until you can verify that the vault you are considering is unaffected or properly remediated, the safer choice is not to deposit.
Our verdict:Avoid3.5/10
HelpfulCoin report card
Avoid3.5/ 10 overall
Serious problems, or it no longer works.
- SafetyHow funds are held, audits, licence, incidents.
- F (2.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- – (not graded)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- D (4.0 out of 10)
- ReputationHow established and openly run it is.
- F (3.5 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Clober Liquidity Vault at a glance
- Category
- DEXes
- Product
- On-chain market-making vaults
- Protocol
- Clober order-book DEX
- Chains
- Monad, Base
- Token
- No native token
- Audits
- Two recorded; scope and findings unspecified
- Incident
- 133 ETH reportedly taken in 2024 vault exploit
- Value locked
- $25.4K−10.7% 7d
- Last checked
Green flags and red flags
Reassuring
- Clober’s core V2 Solidity contracts are published on GitHub.
- Two audits are recorded for the protocol, although their scope and findings need checking.
- Clober’s exchange uses on-chain order matching rather than relying on a central order book operator.
Be careful about
- A December 2024 report said a Clober liquidity vault lost 133 ETH to an exploit.
- Clober’s current remediation and reimbursement status is unclear.
- Audit names, scope and findings are unspecified.
- Vault fees, withdrawal limits and processing times are not published as general terms.
What is Clober Liquidity Vault?
Clober Liquidity Vaults are on-chain vaults that put deposited assets to work in market-making on Clober, a decentralised exchange (DEX). Clober’s exchange uses an on-chain order book, where buyers and sellers place orders rather than trade through a typical automated market-maker pool. Its matching system is called LOBSTER. Clober describes its vaults as active liquidity vaults powered by PropAMMs, but the exact strategy and risks can vary by vault. The protocol operates on Monad and Base, and Clober has no native token. A vault is different from simply holding crypto: its assets are exposed to the vault contract and the trading strategy, so losses are possible. The 2024 vault exploit is an especially important risk to consider before depositing.
Is Clober Liquidity Vault safe after the 2024 exploit?
Clober Liquidity Vault carries a significant safety concern because a vault was reportedly exploited in December 2024. A report said attackers took 133 ETH, then worth about $500,000, from Clober’s liquidity vault. That history makes it important to establish which vaults and contracts were affected and what protections or fixes followed before putting funds at risk. Two audits are recorded for Clober, but their names, dates, scope and findings are not specified, so their existence alone does not show that the affected vault is safe today. Clober’s current reimbursement and remediation status is also unclear. DeFi vaults are not bank accounts: smart-contract failures and trading losses can reduce or wipe out deposited funds, and there is no general deposit guarantee.
Is Clober Liquidity Vault legit?
Clober is a real on-chain trading protocol, but its public track record includes a serious vault exploit. Its core V2 Solidity contracts are published on GitHub, and Clober presents itself as a fully on-chain order-book DEX. These are useful signs of a functioning project, not proof that every contract or vault is safe. Two audits are recorded, but without their reports and scope it is not possible to judge what they covered or whether they included the vault affected by the exploit. Clober’s operating team, founding date, licensing status and a detailed history of incident response are not established by the project details available. A project can be legitimate and still expose users to substantial technical or financial risk. Given the reported loss and unclear remediation, treat Clober’s vaults cautiously rather than relying on the DEX’s operating history alone.
What fees does Clober Liquidity Vault charge?
Clober does not publish a complete fee schedule for its liquidity vaults in the project details available. That means you should not assume deposits, withdrawals or market-making are free. On-chain transactions generally incur network gas fees, paid separately from any vault or trading fees; the amount can vary with network conditions and the chain used. A vault may also have strategy-specific charges or trading costs that affect returns, but Clober’s exact rates and how they are applied are not specified. Before depositing, check the selected vault’s current terms and transaction preview for fees, withdrawal conditions and any performance or management charge. If those terms are not clearly disclosed in the app, do not deposit on the assumption that a displayed return is net of all costs.
How does a Clober Liquidity Vault work?
Clober’s vaults are described as using deposited assets for on-chain market-making through PropAMMs, while its DEX matches trades with an on-chain order book. In an order book, users’ buy and sell orders are matched when their prices meet; market-making strategies can supply liquidity by placing orders. Vault returns, if any, depend on trading activity and the strategy’s results, and are not guaranteed. A deposit therefore takes on both smart-contract risk and the possibility of trading losses. Clober does not publish enough detail about individual vault strategies, expected returns or performance fees to calculate a likely outcome. Before using one, read the vault’s contract and terms, check its token and chain, and understand how assets can be withdrawn. Past trading activity cannot guarantee future returns.
How do Clober Liquidity Vault deposits and withdrawals work?
You deposit supported crypto into a vault on its supported network, and a withdrawal returns assets according to that vault’s contract and available liquidity. Clober does not publish general deposit or withdrawal limits, processing times, minimums or a complete list of withdrawal conditions in the project details available. Because the vault is on-chain, transactions normally require a compatible wallet and network gas; withdrawals may also depend on the specific vault’s rules and liquidity. Check the app’s current terms and transaction preview before signing, and verify the receiving wallet address and network. The reported 2024 exploit makes it particularly important to confirm whether the vault you are considering is affected by that incident and what recovery or remediation applies. Clober’s KYC requirements are not specified; do not assume that every feature is available without identity checks.
How do I start using Clober Liquidity Vault?
To use a Clober vault, start by checking that you are on Clober’s official app and that the wallet is connected to the intended network. Review the vault’s supported asset, contract address, strategy, fees and withdrawal terms before approving a transaction. Then connect a compatible wallet, select a vault and deposit only an amount you can afford to lose. Clober does not publish a universal step-by-step guide, minimum deposit or complete vault-specific terms in the project details available, so the app’s current instructions and transaction details matter. Never sign an approval you do not understand, and consider limiting or revoking token approvals when they are no longer needed. Given the 2024 exploit, do not proceed unless you can verify the vault’s incident status and understand how to exit it.
Before you deposit: a quick checklist
- Verify the vault contract and network in Clober’s app before approving a transaction.
- Find out whether the specific vault was affected by the 2024 exploit and what remediation applies.
- Check the vault’s fees, withdrawal rules and strategy; Clober does not publish a complete general schedule.
- Only deposit an amount you can afford to lose, and review token approvals before signing.
4 steps
How to get started with Clober Liquidity Vault
- 1
Open Clober’s official app and verify the domain and intended network.
- 2
Identify the exact vault contract and check whether it was affected by the 2024 exploit.
- 3
Read the vault’s current strategy, fee and withdrawal terms; do not rely on general assumptions.
- 4
Confirm the token approval and transaction details before signing, and deposit only what you can afford to lose.
Plain English
Jargon explained
- Liquidity vault
- A set of smart contracts that uses deposited crypto to support trading and liquidity.
- Order book
- A trading system that matches buy and sell orders at agreed prices.
- Gas
- A fee paid to the blockchain for processing a transaction.
Quick answers about Clober Liquidity Vault
Does Clober have a native token?
Clober has no native token. That does not establish whether an individual vault issues a receipt token; check that vault’s terms before depositing.
Which networks does Clober Liquidity Vault support?
Clober operates on Monad and Base. Check the selected vault’s supported network and token in the app before connecting or signing a transaction.
Is Clober Liquidity Vault regulated?
Clober is a DeFi product, and its licensing status is not specified. Check local rules before using it; crypto services may be restricted where you live.
Compare
Clober Liquidity Vault alternatives
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.
Fluid DEX is an on-chain swap and liquidity protocol on five networks; it merits a look with careful checks on contracts, fees and risk.
PancakeSwap Infinity is a multichain DEX with multiple pool types; it merits a look, but check fees and contract risks first.
Same category
More DEXes
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.
PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.
PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
Same chain
More on Monad
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.
Sablier Lockup streams vested tokens onchain; it is worth considering, but check its fees, stream terms and smart-contract risks.
3Route routes crypto swaps across DEX liquidity, with a Tezos app and multichain API; it is worth a look if you check fees and transaction details.
LayerZero V2 is cross-chain messaging infrastructure; it is worth a look, but app-specific fees and security need checking.
Morpho Blue is a non-custodial lending protocol with curated vaults, but contract, oracle and liquidity risks make deposits unsuitable for everyone.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.