bemo V2 Review: Is It Safe to Stake GRAM?
bemo V2 is a TON liquid-staking protocol: stake GRAM and receive a token intended to represent your staked position. Its displayed APY is not guaranteed, and users should verify the audit, token details and redemption terms.
Researched and written by the HelpfulCoin teamChecked 10 questions answered
The short answer
bemo V2 may suit TON users who want to stake a small amount of GRAM while keeping a transferable token representing their position. Its 1 GRAM minimum and liquid-staking design are useful, but the displayed 5% APY is not guaranteed. Check the audit details, fees, token naming and redemption terms before staking; the project does not clearly publish several of those important details.
Our verdict:Use with caution5.5/10
HelpfulCoin report card
Use with caution5.5/ 10 overall
Real gaps or risks: check them before you deposit.
- SafetyHow funds are held, audits, licence, incidents.
- D (5.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- D (5.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- C (6.0 out of 10)
- ReputationHow established and openly run it is.
- D (5.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
bemo V2 at a glance
- What it is
- Liquid staking for GRAM
- Chain
- TON
- Token
- bmGRAM / stGRAM naming varies
- Minimum
- 1 GRAM advertised
- Displayed APY
- 5%; not guaranteed
- Audit
- Advertised; auditor and scope unclear
- Licence
- Not published
- Value locked
- $347K+5.6% 7d
- Last checked
Green flags and red flags
Reassuring
- Bemo publishes documentation with staking and unstaking guidance.
- The advertised minimum stake is 1 GRAM.
- Bemo advertises a completed security audit and provides a report link.
Be careful about
- The auditor, audit scope and date are not specified.
- Bemo does not publish protocol fees or typical withdrawal times.
- The liquid token is referred to as both bmGRAM and stGRAM; verify the current V2 token before transacting.
- The displayed 5% APY is not guaranteed and does not remove token or smart-contract risk.
What is bemo V2 and what can you do with it?
bemo V2 is a liquid-staking protocol on TON that lets you stake GRAM and receive a tradable token representing your staked position. The project calls that token bmGRAM; its app also refers to stGRAM, so check the current token name and contract in bemo’s official app and documentation before transferring or trading anything.
The aim is to earn TON staking rewards without locking away all access to your funds. bemo says you can transfer or trade the liquid token and use it in DeFi, such as lending or liquidity pools. Those extra activities involve separate risks and do not guarantee extra returns.
bemo is not a general-purpose exchange or a bank account. It is a TON-based protocol, so you need a compatible TON wallet and should understand that staking, token prices and smart-contract risks can affect what you get back.
Is bemo V2 safe to stake GRAM with?
bemo V2 has some positive signs, but the information available does not establish that it is low-risk. bemo advertises a completed security audit and links to a report, but the auditor, scope and date are not specified. A completed audit can help identify coding issues; it is not a guarantee that a protocol is secure or that funds can always be recovered.
The protocol runs on TON, and its liquid-staking design means you receive a token for your staked GRAM rather than simply holding the original GRAM. That adds risks from the contract and from the liquid token’s market price or ability to be exchanged. The product’s custody arrangements and any incident history are not described.
No licence or insurance is stated. Treat bemo as an unaudited-in-practice risk until you can verify the audit report and understand the contracts. Only stake an amount you can afford to have locked, lose value, or be unable to withdraw promptly.
Is bemo V2 legit, and who runs it?
bemo V2 is an active TON liquid-staking project, but its operating team and track record are not clearly described. The protocol has a V2 app and documentation, and it was tracked from April 2025. That gives users some product history, but it is not enough by itself to establish who is accountable or how the project responds to problems.
bemo says V2 is an upgrade and the app prompts users to migrate funds from V1. If you hold V1 tokens, do not treat a migration prompt as routine: first confirm that you are using bemo’s genuine app and follow its official migration documentation. Never share your wallet recovery phrase or approve an unexpected transaction.
bemo does not publish a licence, and no named team or incident record is provided. That does not prove misconduct, but it limits how much confidence you can place in the project’s transparency. Verify current contract addresses and support channels independently before connecting a wallet.
What does bemo V2 cost, and is its 5% APY guaranteed?
bemo’s homepage displays a 5% staking APY, but that should not be treated as a fixed or guaranteed return. Staking yields can change, and the displayed rate does not tell you what you will earn over a particular period. The minimum stake advertised is 1 GRAM.
bemo does not publish its protocol fees. You may also pay TON network fees for transactions, and the price of bmGRAM or stGRAM may differ from the value of the underlying GRAM when you trade it. Using the liquid token in a lending market or liquidity pool can add separate fees and risks.
Before staking, check the current rate, the transaction’s TON fee and any fee or exchange-rate terms shown in the app. Compare the amount of liquid-staking tokens you will receive with the amount of GRAM you send. Do not estimate your net return from the 5% figure alone.
How do you stake GRAM on bemo V2?
To use bemo V2, connect a compatible TON wallet, check that you are on the genuine bemo app, and review the transaction details before signing. The project says staking starts at 1 GRAM, below the 10,000 GRAM minimum it describes for traditional staking. After staking, you receive a liquid token for your position; bemo’s homepage calls it bmGRAM, while its app and documentation also use stGRAM, so verify the current token details before proceeding.
A cautious sequence is:
- Read bemo’s current staking and migration documentation.
- Confirm the app and contract details using bemo’s official channels.
- Start with a small amount and check the token received in your wallet.
- Keep enough TON for network fees.
- Avoid extra DeFi uses until you understand their separate risks.
A wallet connection does not itself mean you have deposited funds, but signing a transaction can move or approve assets. Read each wallet prompt rather than relying on the app’s headline APY.
How do bemo V2 withdrawals and unstaking work?
You can use the liquid-staking token to transfer or trade your position without first completing a conventional unstake, according to bemo. That does not mean you can always exchange it for GRAM instantly at the expected price: liquidity and market rates depend on available buyers and pools.
To receive GRAM back, follow bemo’s current unstaking or redemption process in its official documentation and check the terms before signing. bemo V2’s unstaking flow is described as notifying users when they unstake, but the public information available do not give a typical processing time, any cooldown, withdrawal limit or redemption fee. Network fees may also apply.
The app has prompted V1 holders to migrate to V2. If that applies to your wallet, verify the migration instructions and the token you hold before approving a transaction. Do not assume that V1 and V2 tokens use the same redemption route. bemo does not publish a KYC process; check the current app requirements before relying on that.
What should I know about bmGRAM and stGRAM on bemo V2?
The main product-specific caution is that bemo describes the liquid token using more than one name: bmGRAM on its homepage and stGRAM in its app or documentation. Before you stake, migrate, trade or use a token in another DeFi app, confirm the exact V2 token and contract address in bemo’s current official documentation. A similar ticker or token name is not proof that an asset is genuine.
Also distinguish holding a liquid-staking token from holding GRAM. The token is intended to represent a staked position, but its trading price can move away from the value of GRAM, especially if trading liquidity is thin. DeFi use may add liquidation, contract and pool risks beyond the underlying staking risk.
If you are migrating from V1, use the documented V2 process rather than a link sent in a message. Check the transaction recipient and permissions in your wallet, and never enter a recovery phrase into a website or share it with support.
Before you deposit: a quick checklist
- Verify the bemo app and the current V2 contract addresses through official channels.
- Check whether bemo currently calls its liquid token bmGRAM or stGRAM before trading or migrating.
- Review the audit report and identify its auditor, scope and date before staking.
- Check the live APY, fees, redemption terms and TON transaction costs before signing.
- Keep enough TON for network fees and never share your wallet recovery phrase.
5 steps
How to get started with bemo V2
- 1
Open bemo through its official channels and check the current V2 app and contract details.
- 2
Read the current staking, unstaking and migration documentation, especially if you hold V1 tokens.
- 3
Confirm the liquid token’s current name and contract address; keep TON for network fees.
- 4
Review the live APY, fees and redemption terms, then start with a small amount if you proceed.
- 5
Check every wallet transaction before signing and never enter your recovery phrase into a site.
Plain English
Jargon explained
- Liquid-staking token
- A token intended to represent GRAM that has been staked through the protocol.
- APY
- The annualised rate shown for staking rewards; it can change and is not a guarantee.
- Network fee
- The fee paid to process a transaction on the TON network.
Quick answers about bemo V2
What is the minimum stake on bemo V2?
bemo says you can start staking with 1 GRAM. Network fees may still apply, so keep TON in your wallet for transactions.
Does bemo V2 guarantee 5% returns?
bemo’s homepage displays 5%, but staking yields can change. The rate is not a guaranteed return and does not include all possible fees or DeFi risks.
Which blockchain does bemo V2 use?
The product operates on TON. Use a compatible TON wallet and check the current app requirements before connecting.
Compare
bemo V2 alternatives
Hipo is a TON liquid-staking protocol for GRAM; its audits and 0% fee are positives, but contract and liquidity risks remain.
SSV Network distributes Ethereum validator duties and offers SSV staking, but variable rewards and staking risks make careful checks essential.
Obol builds Ethereum validator infrastructure; it is worth a look for operators, but staking terms and risks depend on the provider.
KTON is a TON liquid-staking protocol that exchanges staked Gram for KTON, but its unclear fees and withdrawal terms warrant caution.
Babylon builds native Bitcoin staking and collateral products; it is worth exploring cautiously because fees and audit details are unclear.
ether.fi Stake is a non-custodial ETH staking protocol worth researching, but fees, exit timing and smart-contract risks need careful checking.
Same category
More Staking dApps
Laine SOL offers native and liquid Solana staking, with a stated 0% pool fee but added risks for laineSOL holders.
wstETH is Lido’s wrapped stETH token for Ethereum DeFi, but it carries staking, smart-contract and market risks.
Lido is an Ethereum liquid-staking protocol governed by Lido DAO; it offers stETH for staked ETH, with contract, validator and liquidity risks.
Jito Liquid Staking issues JitoSOL for staked SOL, with variable staking and network rewards; check fees, risks and exits first.
Marinade offers Solana staking with native SOL or mSOL; it is worth considering if you understand the fee and smart-contract risks.
BlazeStake is a Solana liquid-staking protocol that issues bSOL; it may suit experienced users, but fees and security details need checking.
Same chain
More on TON
Getgems is a TON NFT marketplace for trading and creating digital collectibles; it may suit TON users, but transparency on security and fees is limited.
OKX is a large centralized crypto exchange with varied trading tools; check custody, fees and regional rules before depositing.
Gate is a long-running centralized exchange with extensive crypto markets, but custody and proof-of-reserves limitations merit caution.
HashKey Exchange is a centralized crypto exchange with a Hong Kong-regulated service; check regional terms and custody risks before depositing.
Symbiosis is a cross-chain swap and bridge protocol; its non-custodial design is useful, but route and contract risks remain.
Bitget is a centralized crypto exchange with derivatives and stock-related products; its reserve claims are useful, but verify custody and terms.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.