Balancer V2 Review: Is It Safe After the 2025 Exploit?
Balancer V2 is a non-custodial DEX protocol for token swaps and liquidity pools. A major reported exploit in 2025 makes checking the affected contracts essential before use.
Researched and written by the HelpfulCoin teamChecked 9 questions answered
The short answer
Balancer V2 may suit experienced DeFi users who understand pool and smart-contract risks, but it is not a cautious choice for new deposits right now. The protocol supports swaps and liquidity pools without taking custody of your wallet, and fees depend on the pool and network. The main concern is the major exploit reported in November 2025. Avoid depositing until you can verify that the specific contracts you want to use were not affected and have been made safe.
Our verdict:Avoid3.8/10
HelpfulCoin report card
Avoid3.8/ 10 overall
Serious problems, or it no longer works.
- SafetyHow funds are held, audits, licence, incidents.
- F (2.0 out of 10)
- CostsFees, spreads, gas, house edge and bonus terms. Higher is cheaper.
- C (6.0 out of 10)
- Ease of useHow easy it is for a newcomer to start, use and withdraw.
- D (5.0 out of 10)
- ReputationHow established and openly run it is.
- D (5.0 out of 10)
Grades: A 8.5+, B 7+, C 5.5+, D 4+, F below 4. A dash means the project doesn't publish enough to grade it.
Balancer V2 at a glance
- What it is
- Non-custodial DEX and liquidity protocol
- Chains
- Ethereum and selected EVM networks
- Token
- BAL
- Audits
- 2 listed
- Incident
- Major V2 exploit reported in Nov 2025
- Fees
- Pool-specific fees plus network gas
- Value locked
- $14.0M−11.8% 7d
- Last checked
Green flags and red flags
Reassuring
- Balancer V2 uses non-custodial smart contracts, so users interact from their own wallets.
- The protocol has a public governance forum and two audits are listed.
Be careful about
- A major exploit affecting Balancer V2 across multiple chains was reported in November 2025.
- Balancer does not publish one protocol-wide fee schedule or general withdrawal limits.
- The listed audits do not guarantee that current pool contracts are safe.
What is Balancer V2 and what can you do with it?
Balancer V2 is a decentralised exchange (DEX) protocol for trading tokens and creating liquidity pools. Its pools are smart contracts that hold tokens; traders swap through them, while liquidity providers deposit tokens and can earn a share of swap fees. Unlike a simple two-token pool, Balancer pools can use several tokens and different weightings. Balancer describes its broader product as supporting fungible and yield-bearing liquidity across Ethereum and selected EVM networks. The protocol is non-custodial: users interact with smart contracts from a crypto wallet rather than depositing into a conventional exchange account. That does not make it risk-free. A November 2025 report said a major exploit affected Balancer V2 across multiple chains, so the incident is central to any decision to use it.
Is Balancer V2 safe to use after the 2025 exploit?
Balancer V2 carries a serious safety concern: a November 3, 2025 report described an exploit affecting V2 on multiple blockchains, with losses reported at about $128 million. Balancer governance later discussed rescued and recovered funds, but those discussions alone do not establish that every affected pool is safe or that all losses were recovered. The protocol is non-custodial, so users retain wallet control, but smart-contract bugs or attacks can still drain deposited assets. Two audits are listed for the protocol, yet an audit is not a guarantee and does not prevent later vulnerabilities. Before interacting, check Balancer’s current incident and governance announcements for the specific network and pool. Given the scale of the reported exploit and the lack of clear remediation details, avoid depositing into Balancer V2 unless you can verify that the exact contracts you plan to use are unaffected and safe.
Is Balancer V2 legit, and who runs it?
Balancer is a real on-chain liquidity protocol, with a public governance forum and the BAL token. Its pools and trades operate through smart contracts rather than through a standard custodial exchange account. That supports its legitimacy as a functioning DeFi product, but it is not the same as a regulated financial service or a guarantee of safe returns. Balancer does not publish a licence, and the people or legal entity responsible for day-to-day operation are not clearly identified. Two audits are listed, but their scope and dates should be checked before relying on them. The protocol’s history includes the major reported V2 exploit in November 2025. So, Balancer is not an obvious fake, but users should weigh its public governance and on-chain operation against the unresolved questions about the incident and who is accountable.
What fees does Balancer V2 charge?
Balancer V2 does not have one universal trading fee: swap fees are set for individual pools, so check the exact pool before trading. A swap also usually incurs a blockchain transaction fee, known as gas, whose amount varies with network demand and the chain used. Liquidity providers may earn some swap fees, but those earnings are not guaranteed and can be outweighed by token price changes, pool losses, or other risks. Balancer does not publish one fixed protocol-wide fee schedule. There may also be costs to approve tokens or make separate deposit and withdrawal transactions. Compare the displayed fee and expected gas with the amount you plan to trade, and do not assume a pool’s past returns will continue. Because of the reported 2025 exploit, cost should be secondary to verifying that a specific pool and contract are safe to use.
How do you trade, add liquidity or withdraw from Balancer V2?
To trade on Balancer V2, connect a compatible wallet, choose the correct network, select the tokens and pool route, then review the exchange rate, pool fee and gas estimate before approving the swap. A token may require a separate wallet approval transaction before the trade. To provide liquidity, choose a pool and deposit the required tokens; some pools use different token proportions, so depositing may change your exposure to each asset. You can withdraw liquidity by interacting with the pool’s withdrawal function and receiving tokens back to your wallet, subject to the pool’s contract and available liquidity. Balancer is non-custodial, so there is no conventional account balance or customer-service withdrawal request. Confirm the contract addresses and network through Balancer’s official channels, and do not interact with V2 pools until you have checked whether the 2025 exploit affected them.
How do Balancer V2 deposits, withdrawals and KYC work?
Getting funds into Balancer V2 means holding supported tokens in a compatible wallet and having enough of the network’s native token to pay gas. You then approve tokens and swap them or deposit them into a pool. Getting funds out means swapping back or withdrawing from the pool to your wallet; Balancer does not send money to a bank account as a centralised exchange would. The protocol does not publish a general minimum deposit, withdrawal limit or KYC threshold. On-chain transactions are generally permissionless, but wallet providers, front ends and other services may apply their own checks or restrictions. Transactions can be delayed or fail when a network is congested, and completed blockchain transactions are usually irreversible. Check the pool’s withdrawal conditions and the specific network’s gas costs first. Most importantly, verify that the V2 contracts you intend to use are not affected by the 2025 exploit.
Before you deposit: a quick checklist
- Check Balancer’s current incident notices for the exact V2 pool and chain before depositing.
- Verify the pool and contract address through Balancer’s official channels.
- Review the pool-specific swap fee, token weights and withdrawal conditions.
- Keep enough of the chain’s native token for gas and token approvals.
5 steps
How to get started with Balancer V2
- 1
Check Balancer’s current incident and governance announcements for updates on the 2025 V2 exploit.
- 2
Identify the exact chain, pool and contract address, and verify that they are not affected.
- 3
Connect a wallet with only the tokens needed and enough native currency for gas.
- 4
Review pool-specific fees, token proportions and withdrawal conditions before approving transactions.
- 5
Start with a small amount only if you can verify the pool is safe, then confirm any transaction details in your wallet.
Plain English
Jargon explained
- Liquidity pool
- A smart contract that holds tokens and enables trading against them.
- Gas
- The blockchain transaction fee, paid in the network’s native token.
- Impermanent loss
- The risk that pool returns lag behind simply holding the deposited tokens as their prices change.
Quick answers about Balancer V2
What is the BAL token used for?
BAL is Balancer’s governance token. Holding it does not make pool deposits risk-free or guarantee a share of trading revenue.
Which networks does Balancer V2 support?
Balancer V2 is associated with Ethereum, Polygon, Arbitrum, Base, Gnosis, Avalanche, Mode, Fraxtal and Polygon zkEVM. Confirm that the pool and assets you want are available on your chosen network.
Can Balancer V2 send funds to a bank account?
No. Balancer is a protocol for swaps and liquidity pools, not a bank account or a service that directly sends fiat currency to your bank.
Compare
Balancer V2 alternatives
Uniswap V3 is a wallet-based decentralized exchange; it is worth a look, but swaps and liquidity positions carry on-chain risks.
Uniswap V4 is a non-custodial token-swapping protocol with customizable pools; worth a look if you understand its contract and hook risks.
Uniswap V2 is a non-custodial token-swap protocol with a long track record, but trades and liquidity positions carry smart-contract and market risks.
PancakeSwap AMM V3 is a multichain DEX for swaps and concentrated liquidity; it merits a look, but carries contract and liquidity risks.
Fluid DEX is an on-chain swap and liquidity protocol on five networks; it merits a look with careful checks on contracts, fees and risk.
PancakeSwap Infinity is a multichain DEX with multiple pool types; it merits a look, but check fees and contract risks first.
Same category
More DEXes
Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.
Stellar DEX is a built-in Stellar asset market with low network costs, but issuer controls and market liquidity deserve careful checks.
PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
SushiSwap is a multichain decentralized exchange for wallet-based token swaps, worth a look if you understand the risks.
Minswap is an active Cardano DEX for swaps, liquidity and MIN staking; it is worth a look with careful checks on fees and pool risks.
PancakeSwap is a multichain DEX for crypto swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.
Same chain
More on Ethereum
Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.
Aave V3 is a multi-chain crypto lending protocol; its long track record and audits are reassuring, but borrowing and smart-contract risks remain.
Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.
GetBlock sells blockchain nodes and data APIs for developers; its free tier is worth testing, but check usage costs and service terms.
ENS maps readable names to Ethereum addresses; it is a long-running protocol, but wallet and smart-contract risks remain.
Bitvavo is a MiCA-authorized European crypto exchange with euro funding and low advertised trading fees, but custodial and product risks remain.
Where the answers come from
Sources
Last checked . Something wrong or out of date? Let us know and we will fix it.