Skip to content
HelpfulCoin

Wallets and tools · Explainer

What Is the Ledger Nano X and How Do You Use It?

The Ledger Nano X is a hardware wallet that keeps your crypto private keys on a physical device while you manage accounts through Ledger’s companion app. Learn how setup, recovery, transfers and security work—and what the device cannot protect you from.

By the HelpfulCoin editorial team · Updated

Illustration for What Is the Ledger Nano X and How Do You Use It?

What is the Ledger Nano X wallet?

The Ledger Nano X is a hardware wallet that keeps the private keys used to control crypto on a physical device. It works with Ledger’s companion app, often called Ledger Live, to show balances, manage accounts and prepare transactions. When you send crypto, the app prepares the transaction and the Nano X signs it; the private keys are intended to remain on the device.

The crypto itself is not stored inside the Nano X. Ownership is recorded on the relevant blockchain, a shared digital ledger. The wallet holds the keys that let you authorize transactions involving your addresses.

The Nano X is a self-custody wallet, meaning you—not Ledger—are responsible for protecting the keys and recovery phrase. That gives you direct control, but also means there is no ordinary account password reset if you lose access. A hardware wallet can reduce exposure to some online attacks, but it cannot make every transaction or crypto app safe.

How does the Ledger Nano X work?

The Ledger Nano X uses a small screen and buttons to let you review and approve transactions, while Ledger’s app provides the account interface. The companion app can connect to the device over Bluetooth on supported mobile devices or by cable where supported. Bluetooth is a way to connect the device; it does not mean the private keys are transferred to the phone.

A typical transaction works like this:

  1. You choose an account and enter the recipient and amount in the app.
  2. The app prepares the transaction and sends it to the Nano X for approval.
  3. You check the key details on the Nano X’s own screen.
  4. You approve or reject using the device buttons.
  5. The signed transaction is sent to the network, where it may take time to be confirmed.

The device’s screen matters because a compromised computer or phone could display details that differ from the transaction it prepares. Check the address, amount and network on the Nano X itself before approving. A transaction sent to a wrong address or incompatible network may be difficult or impossible to reverse.

How do you set up a Ledger Nano X safely?

Set up the Nano X by initializing it yourself, recording its recovery phrase offline and installing only the account apps you need. Start with a device from Ledger or a trusted retailer, and do not use a device that arrives with a recovery phrase already written down or asks you to enter one to activate it.

  1. Charge or connect the device, then follow the on-screen instructions to create a new wallet.
  2. Set a PIN on the device. Do not share it or reuse a PIN that someone else knows.
  3. Write the recovery phrase exactly as displayed by the device, in the correct order. Check every word before continuing.
  4. Store the written backup somewhere private and protected from fire, water and unauthorized access. Do not photograph it, save it in cloud storage or type it into a website, app or computer.
  5. Install Ledger’s companion app from an official source and follow its prompts to connect and check the device.
  6. Install the relevant crypto app on the Nano X, then add an account in the companion app.

The recovery phrase is the backup for the wallet, not a routine login code. Anyone who gets it may be able to take the funds. Ledger support should not need you to reveal it.

How do you receive crypto with the Nano X?

Receive crypto by creating an account for the correct asset and network, then checking the receiving address before sharing it. A receiving address is a public destination for funds; it is not the recovery phrase or PIN. Some assets use similar-looking addresses across networks, so choosing the right network matters.

A careful receiving process is:

  1. Open the relevant account in the companion app and select the option to receive.
  2. Connect and unlock the Nano X if prompted, then verify that the address shown in the app matches the address shown on the device.
  3. Confirm the sender will use the same asset and network, and share only the verified address.
  4. For a large or first-time transfer, consider sending a small test amount first. Check the network’s fees before repeating the transfer.

After sending, a transaction may remain pending until the network confirms it. The Nano X does not control confirmation speed or network fees. If an exchange or sender asks for a memo, tag or other destination detail, check whether that asset requires one and provide it accurately. An incomplete or incorrect detail may delay recovery or cause loss.

How do you send crypto safely?

Send crypto by selecting the correct account, entering the destination and amount, and checking every important detail on the Nano X screen before approving. The hardware wallet can authorize a transaction, but it cannot reverse one after the network accepts it.

  1. Confirm the destination address directly with the recipient or through a trusted channel. Do not rely on an address copied from an old transaction or an unexpected message.
  2. Choose the correct asset and network in the app. Check the displayed fee and the amount that will arrive.
  3. Review the transaction details on the device screen, including the address and amount. Reject it if anything differs from what you intended.
  4. Approve only when the details are correct, then wait for the network to confirm the transaction.

For a new recipient, a small test transfer can help identify address or network mistakes before a larger transfer. It does not eliminate risk, and it may involve additional fees. Be particularly cautious when a website asks you to connect your wallet and approve a transaction: a transaction may grant permissions or interact with a smart contract rather than simply send funds. Do not approve a request you do not understand.

What are the biggest Ledger Nano X security mistakes?

Protect the Nano X by keeping its PIN and recovery phrase private, verifying transactions on its screen and treating unexpected requests as suspicious. The recovery phrase is the most important backup: someone who obtains it may be able to access funds without your physical device.

Watch out for these common mistakes:

  • Saving the recovery phrase in a photo, notes app, email, password manager or cloud drive.
  • Entering the phrase into a website, computer or phone, even if a message claims it is needed for a security check or wallet update.
  • Approving a transaction without checking its address, amount and purpose on the device.
  • Sending an asset over a network that the receiving service does not support.
  • Assuming a hardware wallet protects funds from scams, malicious contracts or an unsafe exchange.
  • Sharing the PIN or recovery phrase with someone claiming to be support.

Keep the device and its written backup in separate secure places where practical. If the phrase may have been exposed, treat the wallet as compromised: use a trusted device and wallet process to move remaining funds to a newly created wallet, with a new recovery phrase. Never reuse a phrase that someone else may know.

Is the Ledger Nano X right for you?

The Nano X may suit someone who wants a physical device to approve crypto transactions and is prepared to manage a recovery phrase carefully. It is less suitable for someone who expects an account provider to reset access, or who would find secure offline backup difficult. Buying a hardware wallet does not remove the need to check the safety of exchanges, apps and smart contracts used with it.

Before relying on it, check that the companion app supports the assets and networks you plan to use. Some assets may require a separate compatible wallet interface, even if the Nano X can secure the relevant keys. Also consider whether you are comfortable reviewing transaction details on a small screen and keeping the device’s software and companion app up to date through official channels.

The Nano X is a tool for key management, not a guarantee against loss or a source of investment advice. Crypto prices can change sharply, and network transactions are often irreversible. Keep only the funds you need accessible in the wallet, understand the recovery process before depositing a significant amount, and do not share the backup with anyone.

What should you do if the device is lost or damaged?

You can usually restore access to a wallet with its recovery phrase if the Nano X is lost, damaged or replaced, but the phrase must remain private. On a replacement device or compatible wallet, follow the official recovery process and enter the words only on the device when it explicitly asks for them—not into a website, message or computer form.

A few distinctions help:

  • Losing the device is not the same as losing the crypto; the assets remain recorded on their blockchains.
  • Losing both the device and the recovery phrase may mean losing access permanently.
  • If someone else has your recovery phrase, a PIN change on the original device does not make that phrase safe again.
  • If the device is merely misplaced and the phrase remains secure, avoid rushing into a recovery process prompted by an unsolicited message.

Never accept help from an unexpected caller or direct message that asks for the recovery phrase. If access is restored, check that the correct accounts and networks are available before making transactions. Store the replacement device’s PIN securely, and keep the recovery backup offline and protected.

Frequently asked questions

Does the Ledger Nano X store crypto?

No. The Nano X stores the private keys that control your crypto, but the crypto itself remains recorded on its blockchain. The companion app shows balances and helps you create transactions.

Is Bluetooth on the Ledger Nano X safe to use?

Bluetooth lets the Nano X connect to compatible mobile devices, and the keys stay on the hardware wallet when transactions are signed. You can use a cable instead where supported, or leave Bluetooth unused.

What happens if I lose my Ledger Nano X?

The recovery phrase is the essential backup. If the device is lost or damaged, the phrase can restore access using a compatible wallet, so keep it private and offline.

Can the Ledger Nano X hold every cryptocurrency?

Ledger’s companion app supports many assets, but support varies by coin and network. Check that the specific asset and network are supported before sending funds; some assets may require a compatible third-party wallet.

Is the Ledger Nano X completely safe?

A hardware wallet reduces some online risks, but it cannot prevent every loss. Scams, exposed recovery phrases, incorrect addresses, unsupported networks and malicious transaction approvals can still put funds at risk.

Mentioned in this guide

dApps in this guide

Crypto logo

Crypto

Centralized Exchanges

Score 6.5 out of 10

Crypto.com is a crypto app and exchange with broad trading and euro deposit options; it merits a look, but check fees and product risks.

Cronos

Keep reading

Related guides

All wallets and tools guides

Wallets and tools · Explainer

What Is CryptoCompare and How Do You Use It?

CryptoCompare is a market-data and learning platform, not a crypto wallet or exchange. This guide explains what its prices and tools can tell you, how to use them carefully, and what to check before relying on its data.