Blockchain · Explainer
What Is PulseChain? A Simple Explanation for 2026
PulseChain is an Ethereum-compatible blockchain that uses PLS to pay transaction fees. It began as a fork of Ethereum, but it is a separate network with its own tokens, apps and risks.
By the HelpfulCoin editorial team · Updated

What is PulseChain?
PulseChain is a separate blockchain designed to run Ethereum-style apps, and it uses PLS to pay transaction fees. It is often described as an Ethereum fork: a network created from Ethereum’s code and, at launch, a copy of parts of Ethereum’s on-chain state. It is not an Ethereum upgrade, and transactions on one chain do not automatically happen on the other.
PulseChain is an EVM-compatible Layer 1. The EVM, or Ethereum Virtual Machine, is the software environment that runs smart contracts on Ethereum and compatible chains. Compatibility can make it easier for developers to adapt familiar wallets and apps, but it does not guarantee that every Ethereum app is available or safe on PulseChain.
The network is active, but its ecosystem is separate from Ethereum’s. It has its own transaction history, token contracts, validators and app deployments. PLS is the native token used for fees. The project is associated with Richard Heart, who is also associated with HEX. As with any blockchain, a network’s existence does not guarantee that a token, app or investment will retain value.
How does PulseChain work?
PulseChain uses a blockchain of its own, where validators process transactions and smart contracts run according to the network’s rules. A wallet can connect to it by selecting or adding PulseChain as a network. Once connected, the wallet can show PLS and tokens whose contracts exist on PulseChain.
EVM compatibility means some Ethereum developer tools and smart-contract code can be used or adapted. But an Ethereum deployment is not automatically deployed on PulseChain. An app’s developers must make it available there, and users need the correct network and contract addresses.
PulseChain’s design goal has included lower-cost transactions than Ethereum, but costs can change with demand and network conditions. Don’t assume a transaction is free or that its fee will match a fee on Ethereum. Before confirming, check the wallet’s network label, recipient, token and fee details. A transaction made on PulseChain is recorded on PulseChain; it won’t appear as an Ethereum transaction just because both networks use similar software.
What is PLS, and why does PulseChain need it?
PLS is PulseChain’s native token, used to pay for actions such as sending a transaction or interacting with a smart contract. A wallet generally needs some PLS to cover these fees, even when the action involves another token. Fees are paid to the network as part of transaction processing; they are not the same as an app’s trading fee.
PLS is also traded or held as a crypto asset, but that does not make it a stable store of value or guarantee that it can be sold easily. Its price and liquidity can change. PulseChain’s fee amounts can also vary, so check the transaction estimate in your wallet before approving it.
Do not confuse PLS with similarly named tokens on other networks. Token names and ticker symbols are not unique across blockchains. Check that the wallet is set to PulseChain and that the token contract matches the one used by the app you intend to use. Never rely only on a logo, search result or token name when deciding whether an asset is genuine.
Did PulseChain copy Ethereum balances and tokens?
At launch, PulseChain copied parts of Ethereum’s on-chain state, so some Ethereum wallet balances and token records appeared on PulseChain. This is sometimes called an airdrop or fork copy, but it does not mean every Ethereum asset moved or that a copied token has the same value as the original.
A copied token may have a different contract on PulseChain, little or no liquidity, or no functioning app behind it. Its issuer may not support it. A record of a token balance is not proof that it can be redeemed for the original asset. Ethereum NFTs and other assets can have similar limitations.
The copy also does not automatically include assets held by a centralized exchange or another custodian. Those balances are controlled by the service, not directly by a personal wallet, and the service decides what networks and assets it supports. Before trying to use a copied token, check its contract, the project’s current support, and whether there is real liquidity. Avoid signing unfamiliar approvals simply to see whether a token works.
How can you start using PulseChain safely?
You can connect a compatible wallet to PulseChain, but do so only after checking the network information and the app you plan to use. A safe first interaction should be small and deliberate:
- Choose a wallet you control. Keep its recovery phrase offline and never give it to a website, support account or person claiming to help.
- Find the network details through PulseChain’s official documentation. Check the chain name, chain ID and RPC information; do not copy details from a random message or sponsored result.
- Add or select PulseChain in the wallet. Confirm the network label before sending anything. Wallet interfaces differ, so follow the wallet’s own instructions.
- Obtain a small amount of PLS through a service or route you have independently verified. Check the sending and receiving networks before moving funds.
- Test with a small transaction. Confirm the recipient address, token contract, fee and network. Only proceed with more if the test arrives as expected.
- Review app permissions. Check what a wallet signature or token approval allows, and reject requests you do not understand.
A transfer to the wrong chain or address may not be recoverable. Keep enough PLS for fees and avoid putting funds you cannot afford to lose into an unfamiliar app.
What risks should you consider before using PulseChain?
PulseChain carries the risks common to public blockchains, including irreversible transactions, faulty smart contracts, phishing and sharp token-price changes. A wallet connection does not give an app custody of funds by itself, but signing a transaction or token approval can give a contract permission to move assets.
PulseChain’s public team and security disclosures are limited, which makes it harder to assess some project and ecosystem risks. That is a reason to be cautious, not proof that every app or transaction is unsafe. Check the specific contract and app, and do not treat a security audit, if one is claimed, as a guarantee against loss.
Bridges add another layer of risk. They move assets or representations of assets between networks, and a mistake about the route, token or destination chain can cause loss. Use only routes you have verified through reliable project documentation, and check the exact asset you will receive. A token with a familiar name on PulseChain may not be backed by the equivalent token elsewhere.
No network can guarantee a transaction will be cheap, an app will remain available or a token will stay liquid. Avoid using borrowed money or putting essential savings into speculative tokens.
What are common PulseChain mistakes to avoid?
The most common PulseChain mistakes come from treating it as if it were Ethereum or assuming familiar token names mean familiar assets. Watch out for these errors:
- Sending funds on the wrong network. Check the network on both the sending and receiving sides. A matching address format does not mean the networks are interchangeable.
- Assuming a copied balance is valuable. Verify the contract, issuer support and liquidity before attempting to trade or use a token.
- Confusing token tickers. PLS or another ticker can refer to different assets on different chains. Confirm the network and contract, not just the symbol.
- Using unverified RPC or bridge details. Incorrect settings can mislead a wallet or send funds through an unsafe route. Get technical details from a source you trust.
- Approving unlimited token access without checking. Read the approval request, use a limited amount when possible, and review or revoke old approvals with a reputable tool.
- Sharing a recovery phrase. Legitimate support does not need it. Anyone who gets it can control the wallet.
If an interaction seems urgent, promises a guaranteed return or asks for a recovery phrase, stop. A small test transaction can reduce some operational mistakes, but it cannot make a risky contract safe.
How is PulseChain different from Ethereum?
PulseChain is separate from Ethereum, even though it uses Ethereum-compatible technology and began with a copy of some Ethereum state. Ethereum has its own native asset, ETH, and its own network fees; PulseChain uses PLS for its fees. Tokens and app deployments on the two chains are distinct unless a project or bridge specifically supports a connection between them.
Ethereum has a larger, more established app ecosystem and broad developer support. PulseChain offers an alternative network with its own apps and activity. These differences can affect how easy it is to find a wallet, exchange, bridge or app that supports a particular asset, but popularity alone is not a safety guarantee.
When comparing a PulseChain app with an Ethereum version, check the exact network and contract address. Also look for current documentation, independent security information, available liquidity and the risks of any bridge involved. A familiar interface or a copied Ethereum contract does not prove that the PulseChain deployment has the same code, users or protections.
Choose a network based on the particular transaction and your ability to verify the app and asset. Do not send funds to PulseChain simply because an Ethereum wallet shows a copied balance, and do not assume an Ethereum service will support withdrawals from PulseChain.
Frequently asked questions
Is PulseChain the same as Ethereum?
PulseChain is EVM-compatible, meaning many apps built for Ethereum can be adapted to run on it. That does not mean Ethereum apps or assets work on PulseChain automatically; developers must deploy or support them on the separate network.
What is PLS used for?
PLS is PulseChain’s native token and is used to pay transaction fees on the network. A token called PLS on another chain may not be the same asset, so check the network and token details before sending or swapping it.
Did PulseChain copy Ethereum tokens?
Some Ethereum balances and token records were copied at PulseChain’s launch, but a copied token is not automatically valuable or usable. Its issuer, liquidity, contract and support on PulseChain all matter, and assets held with a centralized service may not have been copied to a personal wallet.
Is PulseChain safe to use?
PulseChain is an active EVM blockchain, but activity and app support can change. Before using it, check that the network, app and token contract are genuine, and consider the limited public team and security disclosures when judging risk.
Can I use ETH to pay PulseChain fees?
No. PLS pays transaction fees on PulseChain, not Ethereum. A wallet needs the right network and fee token for the transaction; using the wrong network can make funds difficult or impossible to recover.
Mentioned in this guide
dApps in this guide
PulseChain is an active EVM blockchain using PLS for fees; its explorer is useful, but limited team and security disclosures call for caution.
Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.
Keep reading
Related guides
Blockchain · Explainer
What Are 5 Reasons to Build on Ethereum in 2026?
Ethereum remains a practical place to build because it combines programmable contracts, widely used standards and a large ecosystem of tools and apps. It is not the right fit for every project: fees, scaling choices and smart-contract risks still need careful planning.
Blockchain · Explainer
How Does Algorand Staking Work in 2026?
Algorand introduced protocol staking rewards in 2025 to encourage participation in network security. Learn how the rewards work, what you need to do to take part, and what risks and older reward programs to keep separate.
Blockchain · Explainer
What Is Bitcoin and Why Does It Matter for Web3?
Bitcoin is a digital currency and a public blockchain maintained by a distributed network, not a company or a bank. It matters to Web3 as an early example of online value that people can hold and transfer without relying on one central operator, although it is not designed to run every kind of Web3 app.
Blockchain · How-to
How to Bridge ETH to Blast and Earn Points
Blast Points were part of an earlier campaign tied to activity such as bridging and holding assets, not a guaranteed reward for every transfer. The campaign has ended, so this guide explains how an ETH bridge works, what you can and cannot earn in 2026, and how to reduce the risk of a costly mistake.
Blockchain · Chain guide
What Is Ronin Network? A Beginner's Guide
Ronin is an EVM-compatible blockchain built with gaming in mind, including games such as Axie Infinity. Learn what RON does, how to use the network, and how to reduce wallet and bridge risks.
Blockchain · Explainer
What Is Proof of Work and How Does It Work?
Proof of work is a way for a blockchain network to agree on which transactions to record. It uses computational work to make adding blocks costly, while letting other computers check the result cheaply.
Blockchain · Explainer
What Is RSK (Rootstock) and How Does It Work?
RSK, also called Rootstock, is a Bitcoin sidechain that supports Ethereum-style smart contracts. Learn how its Bitcoin link works, what RBTC is used for, and how to reduce risk when using the network.
Blockchain · Explainer
What Is Proof of Stake and How Does It Work?
Proof of Stake is a way for a blockchain to agree on valid transactions using validators who stake the network’s token. Learn how validation and staking work, how PoS compares with mining, and what risks to check before staking.