Wallets and tools · How-to
How to Set Up and Fund a Polygon Wallet
A “MATIC wallet” usually means a wallet set up for Polygon PoS, where POL is now the native token used for gas. Set up a self-custody wallet, check the network carefully, then fund it with POL or bridge supported assets.
By the HelpfulCoin editorial team · Updated

What is a MATIC wallet, and what changed to POL?
A MATIC wallet is usually a crypto wallet connected to Polygon PoS, but POL is now the network’s native token. Polygon changed its native token from MATIC to POL at a 1:1 rate; on Polygon PoS, the upgrade happened automatically. People still use “MATIC wallet” as a familiar name, and some wallets or services may continue to show MATIC in parts of their interface.
POL pays gas, the small fee for processing transactions on Polygon PoS. The network also supports other tokens, such as stablecoins, but those tokens do not usually pay the network fee. That means a wallet holding only another token may not have enough POL to send it or use an app.
Before funding a wallet, check which network an asset is on. A token with the same name can exist on several networks, and sending it to an incompatible network or address can make it difficult or impossible to recover. For Ethereum-held MATIC, use a supported conversion route, such as the Polygon Portal, and review the current steps before proceeding.
Which wallet should you use for Polygon?
A self-custody wallet such as MetaMask can connect to Polygon PoS, while a crypto exchange account can hold Polygon assets on your behalf. In a self-custody wallet, you control the recovery phrase and are responsible for keeping it safe. With an exchange, the service controls the wallet keys and handles withdrawals under its own terms.
For this walkthrough, use a reputable self-custody wallet that supports Polygon PoS and lets you verify the network before signing transactions. A phone app or browser extension may work; use the wallet’s genuine app store or official site to find it, and avoid sponsored public reporting or unsolicited messages.
Before choosing, consider whether you need a wallet for simple holding, transfers, or connecting to apps. Check that it supports the Polygon network and can display POL. Wallet software does not protect you from scams, mistaken transfers, or malicious transactions. A wallet’s presence in an app store is not proof that every app or token it connects to is safe.
How do you create a Polygon wallet safely?
You can set up a Polygon wallet in a few steps using a self-custody wallet that supports Polygon PoS. The exact screens differ by wallet, but the core process is similar:
- Get the wallet app or browser extension from the provider’s genuine distribution channel.
- Choose the option to create a new wallet and follow the setup prompts.
- Write down the recovery phrase on paper and store it somewhere private and secure. Never share it, enter it into a website, or save an unprotected screenshot or cloud note.
- Set a strong device password or wallet password, and enable device security features such as a screen lock.
- If the wallet offers a recovery-phrase check, complete it before adding funds.
The recovery phrase can give someone full control of the wallet. Support staff should not need it, and no legitimate helper should ask you to send it. If you already have a wallet, you can usually add Polygon PoS to that wallet instead of creating a new one. Only restore a wallet using its recovery phrase inside the genuine wallet app, never into a link sent by a stranger.
How do you add Polygon PoS to your wallet?
Add Polygon PoS through your wallet’s network menu or its verified network directory, then check that the displayed chain is Polygon PoS before sending funds. Some wallets include the network by default; others may ask you to add or select it.
If you enter network details manually, get them from a trusted Polygon or wallet provider source and check them character by character. Polygon PoS uses chain ID 137. Do not copy network settings from an unsolicited message or random social-media post; a malicious network entry can mislead you about what you are signing or where assets are going.
After adding the network, switch to Polygon PoS and copy your wallet’s public address. A self-custody wallet often uses the same address format across Polygon and Ethereum, but that does not make assets interchangeable between networks. When you are about to receive funds, the sender or exchange must also use Polygon PoS. Check the network label in both places, not just the address.
How do you fund a Polygon wallet with POL?
You can fund a Polygon wallet by withdrawing POL from a service that supports Polygon PoS, buying through an available wallet service, or bridging assets from another network. Availability depends on your location and the provider; check its current support, fees, and terms before using it.
For an exchange withdrawal:
- In your wallet, switch to Polygon PoS and copy the receiving address.
- At the exchange, choose POL and select Polygon PoS as the withdrawal network. Do not choose Ethereum or another similarly named network by mistake.
- Compare the address shown by the exchange with the one in your wallet, and check the amount and fee.
- If practical, send a small test amount first. Wait for it to arrive before sending more.
- Keep enough POL for future network fees.
Some services may still label the asset MATIC. Confirm that the service supports the relevant Polygon PoS withdrawal and explains how it handles the MATIC-to-POL change. A withdrawal can be delayed or unavailable because of service restrictions or maintenance.
How do you bridge crypto onto Polygon PoS?
You can bridge crypto to Polygon PoS when you already hold an asset on another supported network, but you must use a bridge that supports the exact asset and route. A bridge moves or represents assets across networks; it is not the same as sending a token directly between wallets.
A cautious bridge process looks like this:
- Open the bridge through a trusted, independently verified route, such as the Polygon Portal, or a provider you have researched.
- Check the source and destination networks, token, amount, estimated fee, and any stated processing time.
- Make sure the source wallet has enough of that network’s native token to pay its gas fee. For an Ethereum transaction, this usually means ETH for gas.
- Connect the wallet, review the transaction in the wallet itself, and reject it if the token, network, or requested permissions look wrong.
- After completion, switch to Polygon PoS and check that the expected asset arrived. Keep POL for transactions on Polygon PoS.
Bridges and smart contracts can fail or be exploited, and bridge fees or processing times can change. Do not bridge a token unless the destination wallet or service supports it.
What mistakes should you avoid when funding a Polygon wallet?
The most common mistakes are choosing the wrong network, sending too much before testing, and forgetting POL for gas. A familiar address does not guarantee that a transfer is on the right network. Check the network selected by the sender and the receiving wallet every time.
Watch out for these errors:
- Choosing the wrong withdrawal network: “Polygon,” “Polygon PoS,” and Ethereum are not interchangeable options. Select the exact supported network.
- Sending an unsupported token: Confirm that the receiving wallet or service supports that asset on Polygon PoS.
- Sending everything at once: A small test transfer can help catch a wrong network or address before a larger transfer.
- Sharing the recovery phrase: Anyone who gets it may take the wallet’s assets. Keep it private and offline.
- Approving a suspicious request: A fake site may ask you to sign a transaction that grants access to tokens. Read wallet prompts and reject unexpected requests.
- Confusing an old ticker with the network: MATIC and POL labels may vary by provider. Verify the asset and chain, rather than relying on the ticker alone.
If funds do not appear, check the transaction status and network in a trusted block explorer. Never give a stranger your recovery phrase to “recover” them.
How do you check a Polygon transfer and keep the wallet safe?
You can check a Polygon transfer by reviewing its status in the wallet or a trusted block explorer, then confirming that the transaction used the intended network and destination address. A completed transaction generally cannot be reversed by the wallet provider, so verify details before approving it.
For a first transfer, confirm all of the following before sending more:
- The receiving address matches your wallet’s public address.
- The withdrawal or bridge route uses Polygon PoS as the destination network.
- The asset is supported by your wallet or the service receiving it.
- The amount and fee are what you expect.
- The wallet still has enough POL for later transactions.
If a transfer is pending, do not repeat it immediately; check its status first, since a second transaction could send additional funds. If it fails, use the wallet or service’s genuine support process and share only the public transaction ID or address when needed. Never share a recovery phrase, password, or private key. Keep a small amount of POL available, but avoid leaving more value in a wallet than you are comfortable securing yourself.
Frequently asked questions
Is MATIC the same as POL?
MATIC was upgraded to POL as Polygon’s native token. On Polygon PoS, the change was made at a 1:1 rate, though a wallet or exchange may still use the older MATIC name in some places.
What token pays gas fees on Polygon?
POL is used to pay transaction fees on Polygon PoS. Keep a small amount in the wallet even if the main asset you want to use is a different token.
Can I use the same wallet address on Ethereum and Polygon?
Usually, yes. A self-custody wallet can show the same address on several networks, but assets and transaction histories are network-specific. Always select Polygon PoS when receiving a Polygon asset.
Can I send POL straight from an exchange?
It depends on the wallet and service. Some exchanges support withdrawals directly to Polygon PoS, while others may not. Check the withdrawal network and supported asset before sending.
Do I need an exchange to fund a Polygon wallet?
A self-custody wallet does not require an account with an exchange, but you need a way to acquire crypto before you can fund it. Buying, exchange withdrawals, and bridging each have their own fees and risks.
Mentioned in this guide
dApps in this guide
Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.
Across is a cross-chain crypto bridge with fast relayer-based transfers; it is worth a look, but check route costs and bridge risks.
Keep reading
Related guides
Blockchain · Explainer
What Is Polygon, and What Happened to MATIC?
Matic Network became Polygon as the project broadened its plan for scaling Ethereum. The MATIC token also transitioned to POL, so the network’s name and its gas token are now different.
Wallets and tools · How-to
How to Buy and Bridge Crypto for Web3 Projects
To use a Web3 project on another blockchain, you may need to buy a supported token, move it to your wallet, then bridge it to the project’s network. This guide explains how to check the route, make a small test transfer and avoid common mistakes.
Wallets and tools · Explainer
What Is MetaMask and How Does It Work?
MetaMask is a self-custodial crypto wallet and an entry point to apps built on Ethereum and compatible networks. It lets you manage keys and approve transactions, but you—not MetaMask—are responsible for protecting access to your funds.
Blockchain · How-to
How to Bridge ETH to Blast and Earn Points
Blast Points were part of an earlier campaign tied to activity such as bridging and holding assets, not a guaranteed reward for every transfer. The campaign has ended, so this guide explains how an ETH bridge works, what you can and cannot earn in 2026, and how to reduce the risk of a costly mistake.
Wallets and tools · How-to
How to Set Up a Crypto Account Safely (2026)
A “crypto account” can mean an account at an exchange or a wallet you control, and the setup is different for each. Learn how to choose, register, secure access and make a first transaction without mixing up networks or recovery details.
Wallets and tools · Explainer
What Is Session? A Guide to Private Messaging
Session is a decentralized messaging app built around end-to-end encryption and a network of independently operated servers. Learn what it protects, how to get started safely, and what privacy risks remain.
Wallets and tools · How-to
How to Set Up a Crypto Wallet Safely in 2026
Setting up a crypto wallet means choosing how you want to control your keys, creating or accessing the wallet, and protecting its recovery method. Follow these steps to prepare it, test a small transaction and avoid mistakes that can permanently lose funds.
Wallets and tools · How-to
How to Send a Bulla Invoice NFT on Rootstock
Bulla can be used to represent an invoice as an NFT on Rootstock, also known as RSK. The exact screens and wallet requirements may change, so confirm the network and transaction details in Bulla before signing.