Skip to content
HelpfulCoin

Blockchain · Explainer

What Changed One Month After the Ethereum Merge?

One month after Ethereum’s September 2022 Merge, the network was using proof of stake instead of mining. For everyday users, wallets, ETH balances and gas fees had not suddenly changed; the biggest differences were behind the scenes.

By the HelpfulCoin editorial team · Updated

Illustration for What Changed One Month After the Ethereum Merge?

What was the Ethereum Merge?

The Merge replaced Ethereum’s proof-of-work system with proof of stake on September 15, 2022. Before the upgrade, miners used computing hardware to compete to add blocks. After it, validators propose and confirm blocks by staking ETH, the network’s native asset. The change joined Ethereum’s existing execution layer, where transactions and smart contracts run, with its proof-of-stake consensus layer, which coordinates validators.

The Merge was a major change to how the network reaches agreement, not a new Ethereum users had to download or switch to. ETH remained ETH, and the chain continued from its existing history. Wallets, addresses, smart contracts and decentralized applications did not need to migrate to a replacement chain.

For users, the main practical distinction was that Ethereum no longer relied on mining to secure its main network. For validators, the work shifted to running validator software and putting ETH at risk as a security deposit. That change affected the network’s energy use and ETH issuance, but did not itself add more room for transactions.

What changed for ordinary Ethereum users one month later?

One month after the Merge, Ethereum was running on proof of stake, but most people using wallets or apps saw little direct difference. They could continue sending ETH, swapping tokens, using smart contracts and viewing the same account balances as before. No ETH holder needed to claim replacement coins or move funds to a special “ETH 2” token; there was no separate official ETH 2 asset to migrate into.

The clearest immediate changes were behind the scenes: miners had stopped producing Ethereum blocks, validators had taken over that role, and the network used far less energy. In contrast, the familiar user experience remained largely the same. Transactions still needed gas, and applications could still have bugs, outages or scam activity.

One notable limitation at that point was that staked ETH could not yet be withdrawn. The Merge did not include withdrawals; Ethereum enabled them later through the Shanghai/Capella upgrade in 2023. That historical detail matters when reading one-month-after coverage: a statement about locked staking funds then should not be treated as the withdrawal status in 2026.

Did the Merge lower Ethereum fees or speed up transactions?

No. The Merge did not directly make Ethereum transactions faster or cheaper. It changed consensus, not the amount of transaction data the main network could process, so gas fees—the payments made to have transactions processed—continued to rise and fall with demand and available block space.

A busy period can still make a transaction expensive, while quieter conditions may bring fees down. The Merge was not a fix for congestion, and it did not promise a particular transaction speed or fee. Ethereum’s scaling work has involved separate upgrades and layer 2 networks, which process activity using their own systems and settle information back to Ethereum. Those changes should not be confused with what the Merge itself accomplished.

Before sending a transaction, check the network selected in the wallet, the fee estimate and the recipient address. If a wallet or app claims that the Merge guarantees cheap Ethereum transactions, treat that claim cautiously. Network fees can change from one moment to the next, and a transaction sent on a different chain may not arrive where expected.

How did the Merge affect Ethereum’s energy use and ETH supply?

The Merge caused a large reduction in Ethereum’s energy use because proof-of-stake validators do not need energy-intensive mining races. Ethereum’s own estimate put the reduction at about 99.95% compared with proof of work. The precise electricity used by individual validators varies, but the broad effect was a major decrease in the network’s energy demand.

It also changed how new ETH entered circulation. Ethereum stopped issuing mining rewards to proof-of-work miners and instead issued rewards to validators. Overall ETH issuance fell sharply—often described as roughly 90% lower than before the Merge—but it did not become zero. Ethereum also burns some transaction fees under a separate mechanism, so the total supply can rise or fall depending on issuance and burning.

That means “the Merge made ETH deflationary” is too simple as a permanent claim. The supply outcome depends on network activity and protocol rules over time. Lower issuance does not guarantee a higher ETH price, and the Merge did not create a fixed return for ETH holders. It changed network mechanics, not the certainty or value of anyone’s investment.

How did staking work after the Merge, and what are the risks?

After the Merge, validators secured Ethereum by staking ETH rather than mining. A person running a solo validator needs 32 ETH and suitable hardware, a reliable internet connection and technical care. A validator can earn protocol rewards for doing its job, but can also face penalties for being offline or behaving improperly. Rewards vary and are not guaranteed income.

People with less than 32 ETH can use pooled staking services, which combine deposits. Some services issue a liquid staking token that represents a claim related to staked ETH; Lido, for example, provides stETH. Such tokens may be useful, but they introduce provider, smart-contract, liquidity and price risks. A liquid staking token can trade below the value of ETH, and the ability to sell it quickly at a desired price is not guaranteed.

Withdrawals were unavailable one month after the Merge. Ethereum later enabled withdrawals in 2023, but withdrawal timing and terms can still depend on the validator queue or the service used. Check the current provider rules, fees and custody arrangement before staking. Staking is not the same as holding ETH in a wallet, and it is not risk-free.

How can you approach Ethereum staking safely?

If you are considering staking ETH, take these steps before committing funds:

  1. Decide whether staking fits your needs. Consider whether you may need immediate access to the ETH and whether you can accept losses or delays.
  2. Choose between solo staking and a service. Solo validation requires 32 ETH and technical upkeep. A pool or exchange may be simpler, but you take on its operational, custody or smart-contract risks.
  3. Check the provider and the exact terms. Look for how withdrawals work, what fees apply, who controls the keys, and what happens if the validator is penalized. Do not assume a displayed reward rate is fixed.
  4. Start from an official, independently verified app or wallet. Check the network and contract details before approving a transaction. Never share a seed phrase or private key with a staking service.
  5. Keep records and monitor the position. Save transaction details and periodically check the provider’s status, withdrawal process and any changes to its terms.

Do not stake funds needed for bills or emergencies. A high advertised return is not proof that a service is safe, and a token received through liquid staking may not always match ETH’s market price.

What common mistakes should Ethereum users avoid?

Common mistakes include treating the Merge as a fee cut, thinking ETH holders had to migrate, or assuming staking rewards were guaranteed. The upgrade did not do those things. It changed Ethereum’s consensus system while leaving users’ existing ETH and wallet addresses in place.

Watch out for these specific errors:

  • Sending funds to a “migration” site: the Merge did not require a token swap. A message urging you to connect a wallet and migrate ETH may be a phishing attempt.
  • Confusing staking with a savings account: staking returns can vary, and penalties, service failures or market losses can reduce the value of a position.
  • Ignoring liquid-token risks: a staking token may have a different market price from ETH and may be hard to sell during market stress.
  • Expecting cheaper gas: transaction costs depend on demand and capacity, not simply on whether Ethereum uses proof of stake.
  • Relying on old withdrawal advice: withdrawals were unavailable in October 2022 but were enabled later. Check current protocol and provider terms instead of following outdated instructions.

Before approving any transaction, read what the wallet is asking permission to do. If the action is unclear, stop and verify the app through a trusted channel.

What does the Merge mean for Ethereum users in 2026?

In 2026, the lasting change from the Merge is that Ethereum uses proof of stake rather than proof of work. Mining no longer secures Ethereum’s main network; validators do. That remains important for the network’s energy use, issuance and security model, even though it did not immediately change fees or transaction capacity for users.

The Merge also made validator participation a core part of Ethereum’s operation. Validators stake ETH and can be penalized under network rules, while pooled staking services make participation more accessible at the cost of additional provider or contract risks. Ethereum enabled staked-ETH withdrawals in 2023, so the early post-Merge restriction on withdrawals is no longer the current general rule, though individual providers may impose their own procedures or delays.

For a regular user, the practical takeaway is modest: there is no special Merge-era ETH to claim, and the network still requires care with wallet security, transaction approvals and fees. For anyone evaluating staking, the relevant questions are now about the chosen validator or service, withdrawal terms, custody and risk—not whether the Merge is still in progress.

Frequently asked questions

What did the Ethereum Merge do?

The Merge changed Ethereum’s consensus mechanism: proof-of-work mining was replaced by proof-of-stake validation. It did not create a new ETH or Ethereum chain for ordinary users to switch to.

Did the Merge make Ethereum gas fees cheaper?

No. The Merge did not increase Ethereum’s transaction capacity, so it did not directly lower gas fees. Fees still depend on demand and the space available for transactions.

Did the Merge reduce Ethereum’s energy use?

The Merge sharply reduced Ethereum’s energy use because validators no longer needed mining hardware to compete for blocks. Validators stake ETH instead, which uses far less electricity.

Did ETH holders need to do anything during the Merge?

No. A regular wallet holder did not need to take action or move ETH. The network continued to use ETH and existing wallets, addresses and applications.

Can staked ETH be withdrawn now?

Yes. Ethereum enabled withdrawals through the 2023 Shanghai/Capella upgrade. Staking still carries risks, including validator penalties, provider or smart-contract failures, and changes in reward rates.

Mentioned in this guide

dApps in this guide

Ethereum Finance logoScore 7.1 out of 10

Ethereum is a public blockchain for ETH and smart-contract apps; it is worth exploring, but wallet and app risks remain.

Ethereum
Lido logo

Lido

Staking Pool

Score 7.1 out of 10

Lido stakes ETH for liquid stETH; it is a substantial protocol, but returns and instant exit are not guaranteed.

TVL $17.9B−13.0%Ethereum · Solana · Terra +2
Common logo

Common

Privacy

Score 5.2 out of 10

Common is a self-custodial crypto privacy app; it may be worth researching, but unclear fees and audit scope call for caution.

TVL $1.38K−10.1%Arbitrum
Save logo

Save

Lending

Score 5.8 out of 10

Save is a lending protocol on Solana and Eclipse; it offers crypto lending and borrowing, but carries smart-contract and collateral risks.

TVL $58.8M−14.5%Solana · Eclipse
Solo logo

Solo

DEXes

Score 5.5 out of 10

Sologenic offers XRPL trading tools and says it is now part of TX; check conversion terms and risks before using it.

XRP Ledger

Keep reading

Related guides

All blockchain guides

Blockchain · Explainer

What Is the Ethereum Merge?

The Ethereum Merge was Ethereum’s switch from proof-of-work mining to proof-of-stake validation on September 15, 2022. It changed how the network agrees on transactions, but it did not make transactions automatically faster or cheaper.

DeFi · Explainer

What Is Crypto Staking and How Does It Benefit You?

Crypto staking lets you commit eligible tokens to help secure a proof-of-stake blockchain and may earn rewards in return. Learn how staking works, what benefits it can offer, and how to weigh the risks before choosing a method.

Blockchain · Explainer

What Was the Ethereum Merge and Why Did It Matter?

“On the Verge of the Ethereum Merge,” episode 21 of Off the Blockchain, looked ahead to a major Ethereum upgrade. The Merge is complete, so this guide explains what changed, what did not, and what ETH holders should understand about proof of stake today.

Blockchain · Explainer

Why Are People Bullish on Ethereum in 2026?

People are bullish on Ethereum because it is a widely used platform for crypto apps, payments and digital assets, with ETH playing a role in its operation. That case is not a promise of higher prices: competition, fees and technical risks still matter.

Blockchain · Explainer

What Did a Minor Ethereum 2.0 Code Release Mean?

A small Ethereum code release can mark progress without changing what users see straight away. The name “Ethereum 2.0” is now outdated; learn what such releases mean, what changed on Ethereum, and how to assess an upgrade safely.

Blockchain · Explainer

What Are Ethereum Rollups? A Simple Explanation

Ethereum rollups are networks that process transactions outside Ethereum’s main chain and use Ethereum to help secure or settle them. This guide explains how they work, how optimistic and zero-knowledge rollups differ, and how to use one more safely in 2026.

Blockchain · Explainer

How Does the Ethereum Merge Affect Dapps?

The Ethereum Merge changed how the network agrees on transactions, not how dapps work at their core. It cut Ethereum’s energy use sharply, but did not make transactions cheaper or remove the risks of using apps.