Skip to content
HelpfulCoin

DeFi · Explainer

Did Biswap’s Volume Rise 69%, and What Does It Mean?

A claim that Biswap’s trading volume rose 69% needs a timeframe and a clear definition before it can be judged. Learn what the figure might mean, how to check DEX activity, and how to approach a swap safely.

By the HelpfulCoin editorial team · Updated

Illustration for Did Biswap’s Volume Rise 69%, and What Does It Mean?

What is Biswap and how does it work?

Biswap is a decentralized exchange (DEX), a service where crypto users swap tokens through a wallet rather than placing trades with a conventional broker. Biswap describes itself as a multi-chain DEX, so supported tokens and networks can vary depending on the route and app you use.

A DEX typically uses smart contracts—software on a blockchain—to process swaps. Many swaps use liquidity pools, where users have deposited tokens that traders can exchange. The price and amount you receive depend on the pool, the trade size, and market conditions.

For a user, the practical appeal is direct wallet access and on-chain settlement. But “decentralized” does not mean risk-free or that every token is trustworthy. A transaction can be irreversible, and a wallet connection does not guarantee that a token or contract is legitimate.

Before using Biswap, check that you have the official app, that your wallet is on the intended network, and that the token contract matches the asset you mean to trade. A familiar token name or symbol alone is not enough to identify a token safely.

What does a 69% increase in Biswap volume mean?

A 69% rise means the reported volume in one period was 69% higher than in a comparison period, but the percentage is not meaningful without knowing which periods and measurement were used. For example, a change from a quiet day to a busier day can look dramatic while still representing modest activity overall.

DEX volume usually refers to the value of trades processed during a stated period. The calculation may differ between dashboards, especially when they cover different chains, trading pairs, or contract addresses. It can also be affected by token prices: the same number of tokens traded may count as more dollar-denominated volume if their prices rise.

To interpret the claim, a reader needs at least:

  • The start and end dates of the measured period.
  • The comparison period and whether it is the same length.
  • Which Biswap networks and trading pairs are included.
  • The source and method used to calculate volume.

Without those details, the 69% figure is a headline claim, not enough evidence to conclude that Biswap’s activity has grown steadily or that the change is still continuing in 2026.

Does higher volume mean Biswap gained new users?

No, a rise in trading volume does not by itself prove that Biswap attracted new users. Volume counts trading activity, while user growth needs a separate measure, such as the number of distinct wallets that interacted with the exchange during a defined period.

Even wallet counts need care. One person can control several wallets, and a single wallet can make many trades. Automated activity, market makers, and large traders can also contribute substantially to volume without a corresponding rise in ordinary users.

A stronger picture would compare several measures over the same dates:

  • Unique interacting wallets, with the counting method explained.
  • Number of swaps and average trade size.
  • Volume by chain and by trading pair.
  • Repeat activity over time, rather than a one-off spike.

These measures still cannot identify every wallet’s owner or intention. They can, however, help distinguish a broad increase in participation from a short-lived burst of large or repeated trades. Treat claims about new users as separate from claims about higher volume unless both are supported by clearly defined data.

How can you check Biswap’s volume and user-growth claims?

You can assess a volume-growth claim by checking whether the measurement is defined, comparable, and consistent across more than one source of on-chain activity. Do not rely on the percentage alone or assume it describes current conditions.

Use this checklist:

  1. Find the exact dates and the baseline period. Compare periods of equal length where possible.
  2. Check whether the figure covers one network or all supported networks, and whether it counts the same pools and pairs in both periods.
  3. Look for a clear explanation of how trade value is calculated, including how token prices are converted into a common value.
  4. Compare volume with swaps and active wallets. A large volume increase alongside flat wallet activity may suggest bigger trades rather than a broad influx of users.
  5. Check whether activity persisted after the reported interval. A temporary jump is different from a lasting trend.

Figures can differ because measurement methods and coverage differ. If a dashboard does not explain its calculation or dates, describe the claim as unverified rather than treating it as a precise account of growth. Past trading activity also cannot tell you whether a future swap will be profitable or whether a token is safe.

How do you make a Biswap swap step by step?

You can make a Biswap swap more safely by verifying the app, network, token, and transaction details before signing anything. A wallet-based exchange does not remove the need to check every approval and trade.

  1. Open Biswap using an address you have independently verified, and confirm that the wallet shows the intended network.
  2. Check the token’s contract address against a reliable source for that token. Do not choose a token based only on its name or logo.
  3. Enter a small test amount if you are unfamiliar with the route, then review the estimated output, price impact, slippage setting, network fee, and any displayed exchange fee.
  4. Read the wallet’s transaction prompt. Confirm the destination and action, and be cautious if it asks for a token approval larger than expected.
  5. After the swap, check the transaction status and token balance on the relevant network before making another trade.

A swap estimate can change before execution, especially in a fast-moving or thin market. A failed transaction may still consume a network fee, and a completed transaction is generally difficult to reverse. Never share a seed phrase or recovery phrase with a website, support account, or person claiming to help.

What risks should you consider before using Biswap?

Yes, using Biswap carries risks common to DEXs, including price changes, low liquidity, smart-contract faults, and malicious or misleading tokens. The risks depend on the network, trading pair, contract, and transaction you choose.

A low-liquidity pool can produce a worse execution price than expected. Slippage is the difference between the expected and final trade price; setting a wider tolerance can make a trade more likely to execute, but it can also allow a less favorable result. Price impact is the effect your own trade has on the pool price, and it can be substantial for a large order in a small pool.

Smart contracts can contain bugs or be exploited, and a wallet approval can give a contract permission to use tokens. A token can also be hard to sell, have restrictive contract rules, or be an imitation of an asset with the same name. A successful swap does not prove that a token or pool is safe.

Check contract and security information independently, but do not treat an audit or a high volume figure as a guarantee. Only risk funds you can afford to lose, and avoid signing transactions when the wallet prompt does not match the action you intended.

What mistakes should you avoid when using Biswap?

The most common mistakes are rushing a transaction, trusting a token label, and treating a volume headline as proof that a trade or project is safe. A little verification before signing can prevent avoidable losses.

Watch out for these errors:

  • Using the wrong network: A token or balance may not be available on the network currently selected in the wallet.
  • Choosing a lookalike token: Scammers can copy names, symbols, and logos. Verify the contract address.
  • Ignoring the final estimate: Review output, price impact, slippage, and network costs before confirming.
  • Approving without understanding: Check what token and permission the wallet is asking you to approve.
  • Assuming volume equals demand: A short-term increase can reflect a few large or repeated trades, not a lasting rise in users.
  • Following unsolicited support messages: Do not provide recovery words or connect a wallet to a site sent by an unknown account.

If anything in the wallet prompt or swap screen looks different from what you expected, reject the transaction and investigate before trying again. Do not send extra funds to someone promising to reverse a completed transaction or recover a wallet.

What alternatives to Biswap can you compare?

Yes, other DEXs are available, but the right comparison depends on the network and token pair you want to trade. PancakeSwap and Uniswap are examples of other decentralized exchanges; their supported networks, pools, fees, and interfaces are not identical to Biswap’s.

Before choosing an exchange, compare the same trade across the relevant apps. Check the estimated amount received, network fee, price impact, liquidity, token contract, and any extra approval requested. A lower displayed fee does not always mean a better overall execution if the pool is thin or the route is different.

A DEX aggregator such as MetaMask Swap or 1inch can compare routes across supported liquidity sources, but aggregation does not eliminate smart-contract, token, or wallet risks. Confirm which contracts the transaction uses and review the final wallet prompt.

The reported 69% figure, on its own, is not a reason to choose Biswap or trade a particular token. Treat it as a claim about a past or defined measurement period only when the dates and methodology are clear. The decision should rest on the specific trade, the costs, and the risks you understand—not on a growth headline.

Frequently asked questions

Does a 69% increase in Biswap volume prove it gained users?

Not by itself. A volume increase can come from existing users trading more, a few large trades, or market volatility; it does not show how many new people joined.

What does DEX trading volume measure?

Volume is the value of trades over a period. It is different from unique wallets, and a wallet count does not necessarily represent one person per wallet.

Do I need a wallet to use Biswap?

Biswap is a decentralized exchange, so swaps are made through a crypto wallet and recorded on a blockchain. You should check the network, token contract, price impact, and total transaction cost before approving a trade.

Can you lose money swapping tokens on Biswap?

Yes. Swaps can lose value through price movement, slippage, low liquidity, or a mistaken token selection, and smart-contract or wallet risks remain. Never approve a transaction you do not understand or share your recovery phrase.

How can I check a claim about Biswap’s trading activity?

Compare the token pair, network, expected output, price impact, and fees using the same time period and definitions. A headline percentage without a timeframe or underlying measurement is not enough to judge the change.

Mentioned in this guide

dApps in this guide

Biswap

DEXes

Score 5.3 out of 10

Biswap is a multi-chain DEX for wallet-based token swaps; it may suit experienced users, but check fees and contract risks first.

BNB Chain
Pancakeswap logoScore 6.8 out of 10

PancakeSwap is a multichain DEX for swaps and DeFi products; it is worth a look if you understand wallet and smart-contract risks.

BNB Chain
Uniswap logo

Uniswap

DEXes

Score 7.1 out of 10

Uniswap is a long-running wallet-based exchange for crypto swaps, worth a look if you understand smart-contract and transaction risks.

Ethereum · Base · Arbitrum +2
1inch logo

1inch

Dex Aggregator

Score 6.8 out of 10

1inch aggregates decentralized crypto swaps across networks; it is established, but wallet and smart-contract risks still apply.

Keep reading

Related guides

All defi guides

DeFi · Explainer

What Does DEX Mean in Crypto?

DEX means decentralized exchange: a crypto trading service that lets you swap tokens from your own wallet, usually through blockchain software called smart contracts. You keep control of your wallet, but you also take on responsibility for transactions, fees and checking what you are trading.

DeFi · Explainer

What Is the Coinbase Effect on DEX Volume?

The “Coinbase effect” is shorthand for the attention and trading activity that can follow a Coinbase listing or connection to a blockchain ecosystem. It can spill over to decentralized exchanges, but a volume spike alone does not prove Coinbase caused it or that a token is a good trade.

dApp basics · Explainer

What Does JulSwap’s 30-Day Volume Spike Mean?

JulSwap transaction volume reportedly rose by more than 1,000 over a 30-day period, but that figure is hard to interpret without knowing its unit, definition and starting value. Learn what a volume spike can mean, what it cannot prove, and how to check a JulSwap trade safely.

DeFi · Best list

What Are the 10 Best DeFi DApps With Low Fees?

There is no single cheapest DeFi app for every swap: network costs, pool fees and the route your trade takes all affect the total. This guide compares 10 wallet-based options and shows how to check the full cost before you confirm a trade.

DeFi · Explainer

Did Cait’s DeFi Farming Token Arrive on WAX?

The claim that Cait’s DeFi-farming token has arrived on WAX is unconfirmed. Learn what to verify before connecting a wallet or depositing tokens, and how WAX yield farming can put funds at risk.

DeFi · Comparison

DEX vs CEX: Which Is Right for You?

A centralized exchange (CEX) is usually simpler for buying crypto with traditional money, while a decentralized exchange (DEX) lets you trade from your own wallet. The better fit depends on what you value, what you want to trade and how much responsibility you want for security.

DeFi · Review

What Is DODO Exchange and Is It Worth Using?

DODO is a decentralized exchange (DEX) that uses a Proactive Market Maker model, and DODO is its associated token. This review explains how swaps and liquidity work, what the token may be used for, and the checks to make before risking funds in 2026.

DeFi · Explainer

What Was Deriswap, and How Did Async Art Differ?

Deriswap was announced as a way to bring several DeFi services together, but an announcement is not proof of a live, usable protocol in 2026. Async Art was a separate programmable-art project, not part of Deriswap.